Copyright © 2014-2019 VMware, Inc. All rights reserved. Copyright and trademark information.

EN-002526-00

NSX-T Command-Line Interface Reference

NSX-T Data Center 2.4.0

Table of Contents

About This Book
Intended Audience
VMware Technical Publications Glossary
Document Feedback

Introduction to the NSX-T CLI
Logging In and Out of the CLI
CLI Command Modes
Important Note

NSX-T CLI Commands
backup node file <filename> [passphrase <passphrase>]
bottom
clear auth-policy vidm enabled
clear auth-policy vidm lb-extern enabled
clear banner
clear bfd-session local-ip <ip-address> remote-ip <ip-address> stats
clear bfd-sessions stats
clear bgp <ip-address>
clear bgp neighbors
clear dataplane flow-cache stats
clear debug bgp
clear edge-cluster history state
clear hardening-policy mandatory-access-control enabled
clear high-availability channel local-ip <ip-address> remote-ip <ip-address> stats
clear high-availability channels stats
clear high-availability history state
clear high-availability session local-service-id <service-id> peer-service-id <service-id> stats
clear high-availability sessions stats
clear interface <interface-name>
clear interface <interface-name> ip
clear interface <interface-name> plane
clear lldp neighbors
clear lldp neighbors <interface-name>
clear lldp stats
clear lldp stats <interface-name>
clear load-balancer <lb-uuid> pool <pool-uuid> stats
clear load-balancer <lb-uuid> pools stats
clear load-balancer <lb-uuid> stats
clear load-balancer <lb-uuid> virtual-server <vs-uuid> stats
clear load-balancer <lb-uuid> virtual-servers stats
clear load-balancer perf-profile
clear logging-servers
clear logical-router <uuid> high-availability history state
clear management-plane
clear name-servers
clear physical-port <physical-port-name> stats
clear search-domains
clear service http redirect-host
clear service install-upgrade enabled
clear service snmp start-on-boot
clear service ssh start-on-boot
clear user <username> password-expiration
copy file <filename> url <url>
copy url <url> [file <filename>]
deactivate cluster
del all capture sessions
del capture session <esx-session-id-arg>
del capture session <session-id-arg>
del capture session <session-number>
del capture session <session-number>
del capture session <session-number>
del capture session <session-number> interface <interface-name>
del capture session <session-number> interface <port-uuid-name>
del file <filename>
del gateway certificate <ip-address>
del gateway certificates
del gw-controller vm-certificate <vm-id>
del logging-server <hostname-or-ip-address[:port]> proto <proto> level <level> [facility <facility>] [messageid <messageid>] [structured-data <structured-data>]
del name-server <ip-address>
del nsx
del ntp-server <hostname-or-ip-address>
del route prefix <prefix> gateway <gateway-ip> [interface <interface-name>]
del search-domains <domain>
del ssh-known-host <hostname-or-ip-address[:port]>
del user <username> ssh-keys label <key-label> [password <password>]
detach management-plane <hostname-or-ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>]
detach management-plane <hostname-or-ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>]
detach management-plane <ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>]
detach node <node-id>
display capture session <session-id-arg>
display capture session <session-id-arg> parameters <arguments>
down
exit
get all capture sessions
get arp-table
get arp-table
get auth-policy api lockout-period
get auth-policy api lockout-reset-period
get auth-policy api max-auth-failures
get auth-policy cli lockout-period
get auth-policy cli max-auth-failures
get auth-policy minimum-password-length
get auth-policy vidm
get bfd-config
get bfd-session local-ip <ip-address> remote-ip <ip-address>
get bfd-session local-ip <ip-address> remote-ip <ip-address> stats
get bfd-sessions
get bfd-sessions [stats]
get bfd-sessions stats
get bgp
get bgp <prefix>
get bgp <prefix>
get bgp community { NO_EXPORT | NO_ADVERTISE | NO_EXPORT_SUBCONFED | AA:NN }
get bgp ipv4
get bgp ipv6
get bgp neighbor
get bgp neighbor <ip-address>
get bgp neighbor <ip-address> advertised-routes
get bgp neighbor <ip-address> routes
get bgp neighbor summary
get bond <bond name> [stats]
get bonds [stats]
get bridge <uuid>
get bridge <uuid> mac-table
get bridge <uuid> networks
get bridges
get capture session <esx-session-id-arg>
get capture session <session-id-arg>
get capture session <session-number>
get capture session <session-number>
get capture sessions
get capture sessions
get capture sessions
get certificate api
get certificate api thumbprint
get certificate cluster
get certificate cluster thumbprint
get cgroup <uuid> [<translation-type>]
get cgroups
get cgroups with ip <ip-address>
get cgroups with mac <hardware-address>
get cgroups with vif <vif>
get cli-timeout
get clock
get cluster config
get cluster status
get cluster status verbose
get configuration
get controllers
get cpu-stats
get current
get data <uuid>
get data with receiver <uuid>
get dataplane
get dataplane cpu stats
get dataplane flow-cache config
get dataplane flow-cache stats
get dataplane flow-cache stats <lcore-list-all>
get dataplane memory stats
get dataplane perfstats <interval>
get dataplane throughput <time>
get debug bgp
get dhcp ip-pool <uuid>
get dhcp ip-pools
get dhcp ip-pools server-uuid <uuid>
get dhcp lease <string>
get dhcp lease <string> all
get dhcp leases
get dhcp leases all
get dhcp server <uuid> [status | sync]
get dhcp servers [status | sync]
get dhcp static-binding <uuid>
get dhcp static-bindings
get dhcp static-bindings server-uuid <uuid>
get diagnosis config
get diagnosis log
get diagnosis log limit <log-num>
get diagnosis log limit <log-num> context <context-line-num>
get dns-forwarder <uuid> cache
get dns-forwarder <uuid> config
get dns-forwarder <uuid> stats
get dns-forwarder <uuid> status
get dns-forwarder <uuid> table
get dns-forwarder cache
get dns-forwarder stats
get dns-forwarder status
get dns-forwarder table
get dns-forwarders config
get dns-forwarders status
get domain-object <uuid>
get domain-objects <domain_object_type>
get domain-objects <objects_type_with_component_name> <component-name>
get edge-cluster history state
get edge-cluster status
get eula
get file <filename>
get file <filename> thumbprint
get files
get filesystem-stats
get firewall <uuid> addrset name <string>
get firewall <uuid> addrset sets
get firewall <uuid> connection
get firewall <uuid> connection count
get firewall <uuid> connection state
get firewall <uuid> ike policy [<rule-id>]
get firewall <uuid> interface stats
get firewall <uuid> ruleset [type <rule-type>] rules [<ruleset-detail>]
get firewall <uuid> ruleset [type <rule-type>] stats
get firewall <uuid> sync config
get firewall <uuid> sync stats
get firewall <uuid> timeouts
get firewall <vifuuid> addrsets
get firewall <vifuuid> fqdn
get firewall <vifuuid> profile
get firewall <vifuuid> ruleset rules
get firewall [logical-switch <uuid>] interfaces
get firewall addrset name <uuid>
get firewall addrset sets
get firewall connection state
get firewall exclude
get firewall exclude-list
get firewall exclusion
get firewall interface stats
get firewall interfaces
get firewall interfaces sync
get firewall ipfix-containers
get firewall ipfix-filters
get firewall ipfix-profiles
get firewall ipfix-stats
get firewall orphaned-section
get firewall packetlog
get firewall packetlog last <lines>
get firewall published-entity
get firewall published-entity <published-entity-type> <published-entity-id>
get firewall rule-stats
get firewall rule-stats total
get firewall rules
get firewall status
get firewall status
get firewall summary
get firewall sync stats
get firewall thresholds
get firewall vifs
get forwarding
get forwarding [<prefix>]
get gateway certificate <ip-address>
get gateway certificates
get gateway connection status
get gw-controller connections
get gw-controller vm-certificate <vm-id>
get gw-controller vm-certificates
get gw-controller vm-state
get gw-controller vm-state <vm-id>
get hardening-policy mandatory-access-control report [file <filename> [all]]
get hardening-policy mandatory-access-control status
get high-availability channel local-ip <ip-address> remote-ip <ip-address>
get high-availability channel local-ip <ip-address> remote-ip <ip-address> stats
get high-availability channels
get high-availability channels stats
get high-availability history state
get high-availability session local-service-id <service-id> peer-service-id <service-id>
get high-availability session local-service-id <service-id> peer-service-id <service-id> stats
get high-availability sessions
get high-availability sessions remote-ip <ip-address>
get high-availability sessions service-type <service-type>
get high-availability sessions service-type <service-type> remote-ip <ip-address>
get high-availability sessions service-type <service-type> stats
get high-availability sessions service-type <service-type> sync complete
get high-availability sessions service-type <service-type> sync in-progress
get high-availability sessions service-type <service-type> sync summary
get high-availability sessions stats
get high-availability status
get host-switch <host-switch-name> dvport <dvport-id> ipfix setting
get host-switch <host-switch-name> dvport <dvport-id> ipfix stats
get host-switch <host-switch-name> dvport <dvport-id> mcast-filter
get host-switch <host-switch-name> dvport <dvport-id> mcast-filter <entry-mode> <entry-group>
get host-switch <host-switch-name> ipfix stats
get host-switch <host-switch-name> mcast-filter
get host-switch <host-switch-name> mirror-session <mirror-session-id>
get host-switch <host-switch-name> mirror-sessions
get host-switch <host-switch-name> tunnel <local_ip> <remote_ip>
get host-switch <host-switch-name> tunnels
get host-switch <host-switch-name> uplink <uplink> ipfix setting
get host-switch <host-switch-name> uplink <uplink> ipfix stats
get host-switch vlan-table
get host-switches
get hostname
get hugepage
get hyperbus app-id <string> cif-config
get hyperbus cif-table
get hyperbus connection info
get hyperbus logical-switch-port <logical-switch-port-ID> cif-config
get hyperbus vif-id <vif-ID> connection info
get hyperbus vif-id <vif-ID> lip
get hyperbus vif-lip-table
get hyperbus vif-table
get interface <interface-name>
get interface <interface-name>
get interfaces
get interfaces
get interfaces
get interfaces stats
get ip-discovery bindings
get ip-discovery bindings <host-switch-name> <dvport-id>
get ip-discovery bindings <host-switch-name> <dvport-id> ipv4
get ip-discovery bindings <host-switch-name> <dvport-id> ipv6
get ip-discovery bindings <logical-port>
get ip-discovery bindings <logical-port> <ip-version>
get ip-discovery config
get ip-discovery config <host-switch-name> <dvport-id>
get ip-discovery config <logical-port>
get ip-discovery ignore-list
get ip-discovery ignore-list <host-switch-name> <dvport-id>
get ip-discovery ignore-list <logical-port>
get ip-discovery ignore-list <logical-port> <ip-version>
get ip-discovery ignore-list stats
get ip-discovery ignore-list stats <host-switch-name> <dvport-id>
get ip-discovery ignore-list stats <logical-port>
get ip-discovery stats
get ip-discovery stats <host-switch-name> <dvport-id>
get ip-discovery stats <logical-port>
get ipsecvpn ca-certificate <uuid>
get ipsecvpn ca-certificates
get ipsecvpn ca-certificates verbose
get ipsecvpn certificate <uuid>
get ipsecvpn certificates
get ipsecvpn certificates verbose
get ipsecvpn config dpd-profile
get ipsecvpn config dpd-profile <uuid>
get ipsecvpn config ike-profile
get ipsecvpn config ike-profile <uuid>
get ipsecvpn config local-endpoint
get ipsecvpn config local-endpoint <uuid>
get ipsecvpn config local-endpoint <uuid> ca-certificates
get ipsecvpn config local-endpoint <uuid> certificate
get ipsecvpn config local-endpoint <uuid> crls
get ipsecvpn config peer-endpoint
get ipsecvpn config peer-endpoint <uuid>
get ipsecvpn config session
get ipsecvpn config session <uuid>
get ipsecvpn config session local-ip <ip-address> remote-ip <ip-address>
get ipsecvpn config tunnel-profile
get ipsecvpn config tunnel-profile <uuid>
get ipsecvpn crl <uuid>
get ipsecvpn crls
get ipsecvpn crls verbose
get ipsecvpn ikesa
get ipsecvpn ikesa <session-id>
get ipsecvpn ikesa active
get ipsecvpn ikesa active <session-id>
get ipsecvpn ikesa negotiating
get ipsecvpn ikesa negotiating <session-id>
get ipsecvpn ipsecsa
get ipsecvpn ipsecsa ruleid <rule-id>
get ipsecvpn ipsecsa sessionid <session-id>
get ipsecvpn policy rules
get ipsecvpn policy rules <uuid>
get ipsecvpn policy summary
get ipsecvpn sad
get ipsecvpn sad <uuid>
get ipsecvpn session
get ipsecvpn session <uuid>
get ipsecvpn session active
get ipsecvpn session active <uuid>
get ipsecvpn session active local-ip <ip-address> remote-ip <ip-address>
get ipsecvpn session active sessionid <session-id>
get ipsecvpn session down
get ipsecvpn session down <uuid>
get ipsecvpn session down local-ip <ip-address> remote-ip <ip-address>
get ipsecvpn session down sessionid <session-id>
get ipsecvpn session local-ip <ip-address> remote-ip <ip-address>
get ipsecvpn session negotiating
get ipsecvpn session negotiating <uuid>
get ipsecvpn session negotiating local-ip <ip-address> remote-ip <ip-address>
get ipsecvpn session negotiating sessionid <session-id>
get ipsecvpn session sessionid <session-id>
get ipsecvpn session status
get ipsecvpn session summary
get ipsecvpn tunnel stats
get ipsecvpn tunnel stats <keypolicy-id>
get ipsecvpn vti rules
get ipsecvpn vti rules <uuid>
get l2bridge-port <uuid>
get l2bridge-port <uuid> flush-stats
get l2bridge-port-config <uuid>
get l2bridge-ports
get l2bridge-ports-config
get l2vpn service <uuid> sessions config
get l2vpn services config
get l2vpn session <uuid> logical-switch <uuid>
get l2vpn session <uuid> logical-switch <uuid> remote-macs
get l2vpn session <uuid> logical-switch <uuid> stats
get l2vpn session <uuid> logical-switches
get l2vpn session <uuid> stats
get l2vpn session <uuid> status
get l2vpn sessions
get l2vpn sessions config
get l2vpn sessions stats
get last processed barrier <uuid>
get lldp config
get lldp config
get lldp config
get lldp config <interface-name>
get lldp config <interface-name>
get lldp config <interface-name>
get lldp neighbors
get lldp neighbors
get lldp neighbors
get lldp neighbors <interface-name>
get lldp neighbors <interface-name>
get lldp neighbors <interface-name>
get lldp stats
get lldp stats <interface-name>
get load-balancer <lb-uuid>
get load-balancer <lb-uuid> error-log
get load-balancer <lb-uuid> error-log follow
get load-balancer <lb-uuid> error-log reg-filter <regex>
get load-balancer <lb-uuid> health-check-table
get load-balancer <lb-uuid> high-availability-state
get load-balancer <lb-uuid> monitor <monitor-uuid>
get load-balancer <lb-uuid> monitor <monitor-uuid> status
get load-balancer <lb-uuid> monitors
get load-balancer <lb-uuid> persistence-tables
get load-balancer <lb-uuid> pool <pool-uuid>
get load-balancer <lb-uuid> pool <pool-uuid> snat-pools
get load-balancer <lb-uuid> pool <pool-uuid> stats
get load-balancer <lb-uuid> pool <pool-uuid> status
get load-balancer <lb-uuid> pools
get load-balancer <lb-uuid> pools stats
get load-balancer <lb-uuid> pools status
get load-balancer <lb-uuid> session-tables
get load-balancer <lb-uuid> session-tables l4
get load-balancer <lb-uuid> snat-pools
get load-balancer <lb-uuid> stats
get load-balancer <lb-uuid> status
get load-balancer <lb-uuid> virtual-server <vs-uuid>
get load-balancer <lb-uuid> virtual-server <vs-uuid> access-log
get load-balancer <lb-uuid> virtual-server <vs-uuid> access-log follow
get load-balancer <lb-uuid> virtual-server <vs-uuid> access-log reg-filter <regex>
get load-balancer <lb-uuid> virtual-server <vs-uuid> lbrules
get load-balancer <lb-uuid> virtual-server <vs-uuid> stats
get load-balancer <lb-uuid> virtual-server <vs-uuid> status
get load-balancer <lb-uuid> virtual-servers
get load-balancer <lb-uuid> virtual-servers stats
get load-balancer <lb-uuid> virtual-servers status
get load-balancer perf-profile config
get load-balancers
get load-balancers status
get log-file <filename>
get log-file <filename> follow
get logging-servers
get logical-router <uuid>
get logical-router <uuid>
get logical-router <uuid>
get logical-router <uuid>
get logical-router <uuid> bfd-config
get logical-router <uuid> bfd-sessions [stats]
get logical-router <uuid> bgp
get logical-router <uuid> bgp community <bgp-community>
get logical-router <uuid> bgp neighbor
get logical-router <uuid> bgp neighbor <ip-address>
get logical-router <uuid> bgp neighbor <ip-address> advertised-routes
get logical-router <uuid> bgp neighbor <ip-address> routes
get logical-router <uuid> bgp neighbor summary
get logical-router <uuid> forwarding
get logical-router <uuid> forwarding
get logical-router <uuid> forwarding <prefix>
get logical-router <uuid> forwarding <prefix>
get logical-router <uuid> forwarding [<prefix>]
get logical-router <uuid> forwarding ipv4
get logical-router <uuid> forwarding ipv4
get logical-router <uuid> forwarding ipv6
get logical-router <uuid> forwarding ipv6
get logical-router <uuid> high-availability history state
get logical-router <uuid> high-availability status
get logical-router <uuid> interface <interface-id>
get logical-router <uuid> interface <uuid>
get logical-router <uuid> interface <uuid>
get logical-router <uuid> interface <uuid> stats
get logical-router <uuid> interface <uuid> stats ipv4
get logical-router <uuid> interface <uuid> stats ipv6
get logical-router <uuid> interfaces
get logical-router <uuid> interfaces
get logical-router <uuid> interfaces
get logical-router <uuid> interfaces
get logical-router <uuid> interfaces stats
get logical-router <uuid> neighbor
get logical-router <uuid> neighbor <ip-or-mac-address>
get logical-router <uuid> neighbor <ip-or-mac-address>
get logical-router <uuid> neighbor stats
get logical-router <uuid> neighbors
get logical-router <uuid> neighbors
get logical-router <uuid> route
get logical-router <uuid> route <prefix>
get logical-router <uuid> route [<prefix>]
get logical-router <uuid> route [<prefix>]
get logical-router <uuid> route bgp [<prefix>]
get logical-router <uuid> route connected [<prefix>]
get logical-router <uuid> route static [<prefix>]
get logical-router <uuid> stats
get logical-router interface <uuid>
get logical-router interface <uuid> arp-proxy
get logical-router interface <uuid> neighbor
get logical-router interface <uuid> stats
get logical-router interfaces
get logical-router interfaces stats
get logical-router neighbor
get logical-router routes <prefix>
get logical-routers
get logical-routers
get logical-routers
get logical-routers
get logical-routers
get logical-routers stats
get logical-service binding <uuid>
get logical-service bindings
get logical-service port <uuid> [stats]
get logical-service ports [stats]
get logical-service state <uuid>
get logical-service states
get logical-switch <logical-switch-id>
get logical-switch <logical-switch-id>
get logical-switch <logical-switch-id> arp-table
get logical-switch <logical-switch-id> arp-table
get logical-switch <logical-switch-id> mac-table
get logical-switch <logical-switch-id> mac-table
get logical-switch <logical-switch-id> nd-table
get logical-switch <logical-switch-id> ports
get logical-switch <logical-switch-id> vtep
get logical-switch <logical-switch-id> vtep-table
get logical-switch <uuid>
get logical-switch <uuid> mac-address-table
get logical-switch <uuid> ports
get logical-switch <uuid> ports
get logical-switch <uuid> ports stats
get logical-switch <uuid> tunnel-ports
get logical-switch <uuid> vtep-table
get logical-switch <vni-or-uuid>
get logical-switch <vni-or-uuid> arp-table
get logical-switch <vni-or-uuid> mac-table
get logical-switch <vni-or-uuid> stats
get logical-switch <vni-or-uuid> transport-node-table
get logical-switch <vni-or-uuid> vtep
get logical-switch port <uuid>
get logical-switch port <uuid> stats
get logical-switch ports
get logical-switch ports stats
get logical-switch {local | remote} {mac-cache | arp-cache | vtep-cache} <vni>
get logical-switch-port <uuid>
get logical-switch-port status
get logical-switches
get logical-switches
get logical-switches
get logical-switches
get logical-switches
get logical-switches stats
get maintenance-mode
get maintenance-mode
get managers
get mdproxy server <uuid>
get mdproxy servers
get memory-stats
get mirror-session <mirror-session-id>
get mirror-sessions
get name-servers
get namespace status <string>
get namespaces status
get neighbor
get network-stats
get node upgrade status
get node-uuid
get node-uuid
get nodes
get ntp-server associations
get ntp-servers
get parent
get path
get physical-port <physical-port-name>
get physical-port <physical-port-name> stats
get physical-port <physical-port-name> stats verbose
get physical-ports
get ports
get processes
get processes monitor
get processes monitor
get publication <uuid>
get publication dump <filename>
get publications with transport-node <uuid>
get realization-status <uuid>
get receivers
get route [<prefix>]
get route [<prefix>]
get route bgp [<prefix>]
get route connected [<prefix>]
get route prefix <prefix>
get route static [<prefix>]
get routes
get routing-domain <uuid>
get routing-domain <uuid>
get routing-domain <uuid>
get routing-domain <uuid> vtep
get routing-domains
get routing-domains
get routing-domains
get routing-domains
get search-domains
get service <service-name>
get service controller logging-config
get service controller logging-config logging-level <level>
get service controller logging-config name <string>
get service controller logging-config pattern <string>
get service controller logging-level
get service dataplane logging-level
get service dhcp logging-level
get service ike debug-tunnel
get service ike logging-level
get service local-controller logging-level
get service local-controller state
get service nsx-cfgagent cache-table [{config | l2 | l3} {local | remote}]
get service router config
get service router config redist
get service router config route-maps
get service-insertion
get service-insertion <uuid>
get services
get sockets
get sockets
get spoof-guard config <host-switch-name> <dvport-id>
get spoof-guard config <logical-port>
get spoof-guard stats <host-switch-name> <dvport-id>
get spoof-guard stats <logical-port>
get spoof-guard whitelist <host-switch-name> <dvport-id>
get spoof-guard whitelist <logical-port>
get stats
get stats
get support-bundle [file <filename> [all]]
get support-bundle [file <filename>]
get switch-ipfix logical-switch <logical-switch-id> setting
get switch-ipfix logical-switch-port <logical-switch-port-id> setting
get switch-security config <host-switch-name> <dvport-id>
get switch-security config <logical-port>
get switch-security stats <host-switch-name> <dvport-id>
get switch-security stats <logical-port>
get topology
get transport-node <uuid> agent-status
get transport-node <uuid> arp-table
get transport-node <uuid> mac-table
get transport-node <uuid> routing-domain
get transport-node <uuid> routing-vtep
get transport-node <uuid> status
get transport-node <uuid> threat-status
get transport-node <uuid> vifs
get transport-node <uuid> vtep
get transport-nodes status
get tunnel-port <uuid>
get tunnel-port <uuid> stats
get tunnel-ports
get tunnel-ports stats
get upgrade-bundle <bundle-name> playbook <playbook-file>
get upgrade-bundle playbooks
get uptime
get user <username> password-expiration
get user <username> ssh-keys
get version
get version
get vif <vif>
get vm-network-mode
get vmc migration-mode
get vswitch runtime
get vteps
help
join <ip-address[:port]> cluster-id <cluster-id> thumbprint <thumbprint> [token <api-token>] [username <username> [password <password>]]
join management-plane <hostname-or-ip-address[:port]> thumbprint <thumbprint> token <token> [node-uuid <uuid>]
join management-plane <hostname-or-ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>]
join management-plane <hostname-or-ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>]
join management-plane <ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>] [interface-name <interface-name>]
list
nslookup <hostname>
nslookup <hostname>
nslookup dns-forwarder <hostname-or-ip-address>
nslookup dns-forwarder <uuid> <hostname-or-ip-address>
on <registered-node-uuid> exec [<command>]
path <uuid> <ip-address>
ping <hostname-or-ip-address>
ping <hostname-or-ip-address> [repeat <number>]
ping <hostname-or-ip-address> [repeat <number>] [size <number>] [source <hostname-or-ip-address>] [dfbit <enable>]
ping <hostname-or-ip-address> [repeat <number>] [size <number>] [source <hostname-or-ip-address>] [dfbit <enable>] [vrfid <vrf-id>]
ping6 <ip-address>
ping6 <ip6-address> [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [repeat <number>]
ping6 <ip6-address> [repeat <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [size <number>]
ping6 <ip6-address> [size <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [size <number>] [repeat <number>]
ping6 <ip6-address> [size <number>] [repeat <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [source <ip6-address>]
ping6 <ip6-address> [source <ip6-address>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [source <ip6-address>] [repeat <number>]
ping6 <ip6-address> [source <ip6-address>] [repeat <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [source <ip6-address>] [size <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [source <ip6-address>] [size <number>] [repeat <number>]
ping6 <ip6-address> [source <ip6-address>] [size <number>] [repeat <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [source <ip6-address>] [vrfid <vrf-id>]
ping6 <ip6-address> [vrfid <vrf-id>]
ping6 <ip6-address> [vrfid <vrf-id>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [vrfid <vrf-id>] [repeat <number>]
ping6 <ip6-address> [vrfid <vrf-id>] [repeat <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [vrfid <vrf-id>] [size <number>]
ping6 <ip6-address> [vrfid <vrf-id>] [size <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [vrfid <vrf-id>] [size <number>] [repeat <number>]
ping6 <ip6-address> [vrfid <vrf-id>] [size <number>] [repeat <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>]
ping6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>] [repeat <number>]
ping6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>] [repeat <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>] [size <number>]
ping6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>] [size <number>] [egress <dpd-uuid-lrouter-port-arg>]
ping6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>] [size <number>] [repeat <number>]
ping6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>] [size <number>] [repeat <number>] [egress <dpd-uuid-lrouter-port-arg>]
push host-certificate <hostname-or-ip-address[:port]> username <username> thumbprint <thumbprint>
reboot [force]
reset dataplane corelist
reset dataplane hugepage
reset management-plane <hostname-or-ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>]
restart service <service-name>
restore node file <filename> [passphrase <passphrase>]
resume upgrade-bundle <bundle-name> playbook
set auth-policy api lockout-period <lockout-period>
set auth-policy api lockout-reset-period <lockout-reset-period>
set auth-policy api max-auth-failures <auth-failures>
set auth-policy cli lockout-period <lockout-period>
set auth-policy cli max-auth-failures <auth-failures>
set auth-policy minimum-password-length <password-length>
set auth-policy vidm enabled
set auth-policy vidm hostname <hostname-or-ip-address> thumbprint <thumbprint> client-id <vidm-client-id> client-secret <vidm-client-secret> node-hostname <hostname-or-ip-address>
set auth-policy vidm lb-extern enabled
set banner
set capture session <session-number>
set capture session <session-number>
set capture session <session-number> [file <filename>] [count <packet-count>] [expression <expression>]
set capture session <session-number> [file <filename>] [count <packet-count>] [expression <expression>]
set capture session <session-number> direction <capture-direction>
set capture session <session-number> interface <interface-name> direction <capture-direction>
set capture session <session-number> interface <port-uuid-name> direction <capture-direction>
set cli-timeout <timeout>
set dataplane flow-cache <enabled>
set dataplane flow-cache-size <flow-cache-size>
set dataplane interrupt-mode <enabled>
set dataplane jumbo-mbuf-pool-size <jumbo-mbuf-pool-size>
set dataplane packet-queue-limit <number>
set dataplane ring-size rx <ring-size>
set dataplane ring-size tx <ring-size>
set debug bgp
set eula accepted
set firewall <uuid> local-ip <ip-address> sync-peer <uuid> sync-peer-ip <ip-address>
set firewall <uuid> sync-rank <sync-rank> sync-mode <sync-mode>
set gw-controller vm-log-forwarding <enabled>
set gw-controller vm-log-forwarding <enabled> <vm-id>
set hardening-policy mandatory-access-control enabled
set host-switch <host-switch-name> mcast-filter <mcast-filter-mode>
set hostname <hostname>
set hugepage-reserve auto
set hugepage-reserve size <hugepage-size>
set interface <interface-name> [ip <prefix> [gateway <gateway-ip>] | dhcp] plane <plane>
set interface <interface-name> dhcp
set interface <interface-name> dhcp plane <plane> mode <mode> members <members> primary <primary>
set interface <interface-name> ip <prefix> [gateway <gateway-ip>]
set interface <interface-name> ip <prefix> gateway <gateway-ip> plane <plane> mode <mode> members <members> primary <primary>
set interface <interface-name> vlan <vlan> plane mgmt
set interface mac <mac-address> vlan <vlan> in-band plane mgmt
set load-balancer <lb-uuid> rule-log <enabled>
set load-balancer <lb-uuid> rule-log pool <pool-uuid> <enabled>
set load-balancer <lb-uuid> rule-log virtual-server <vs-uuid> <enabled>
set load-balancer perf-profile <perf-profile-type>
set logging-server <hostname-or-ip-address[:port]> proto <proto> level <level> [facility <facility>] [messageid <messageid>] [certificate <filename>] [structured-data <structured-data>]
set maintenance-mode <enabled>
set maintenance-mode <nsxproxy-maintenance-mode>
set name-servers <ip-address>
set ntp-server <hostname-or-ip-address>
set physical-port <physical-port-name> state <physical-port-state>
set repository-ip
set route prefix <prefix> gateway <gateway-ip> [interface <interface-name>]
set search-domains <domain>
set service controller logging-level <level>
set service controller logging-level name <string> <level>
set service controller logging-level pattern <string> <level>
set service dataplane logging-level <level>
set service dhcp logging-level <level>
set service http client-api-concurrency-limit <http-client-api-concurrency-limit>
set service http client-api-rate-limit <http-client-api-rate-limit>
set service http connection-timeout <http-conn-timeout>
set service http global-api-concurrency-limit <http-global-api-concurrency-limit>
set service http redirect-host <hostname-or-ip-address>
set service http session-timeout <http-session-timeout>
set service ike debug-tunnel local-ip <ipv4-addr> remote-ip <ipv4-addr> debug-level <debug-level-arg>
set service ike logging-level <level>
set service install-upgrade enabled
set service keymanager logging-level <level>
set service local-controller logging-level <level>
set service manager logging-level <level>
set service nsx-exporter logging-level <level>
set service policy logging-level <level>
set service router logging-level <level>
set service routing-platform logging-level <level>
set service snmp start-on-boot
set service ssh start-on-boot
set snmp community <community-string>
set timezone <timezone>
set user <username> [password <password> [old-password <old-password>]]
set user <username> password-expiration <password-expiration>
set user <username> ssh-keys label <key-label> type <key-type> value <key-value> [password <password>]
set user <username> username <new-username>
set vmc migration-mode <enabled>
set vswitch runtime <option-name> <option-value>
shutdown [force]
start capture dvfilter <esx-dvfilter-name>
start capture interface <interface-name> [file <filename>] [count <packet-count>] [expression <expression>]
start capture node <cap-node-id> fcport <fcport-id> direction <capture-direction>
start capture node <cap-node-id> fcport <fcport-id> direction <capture-direction> parameters <arguments>
start capture node <cap-node-id> fcport <fcport-id> direction <capture-direction> stream-to <receiver_address> port <port-id>
start capture node <cap-node-id> fcport <fcport-id> direction <capture-direction> stream-to <receiver_address> port <port-id> parameters <arguments>
start capture node <cap-node-id> filter <filter-name> stage <stage-type>
start capture node <cap-node-id> filter <filter-name> stage <stage-type> parameters <arguments>
start capture node <cap-node-id> filter <filter-name> stage <stage-type> stream-to <receiver_address> port <port-id>
start capture node <cap-node-id> filter <filter-name> stage <stage-type> stream-to <receiver_address> port <port-id> parameters <arguments>
start capture node <cap-node-id> interface <cap-interface-id> direction <capture-direction>
start capture node <cap-node-id> interface <cap-interface-id> direction <capture-direction> parameters <arguments>
start capture node <cap-node-id> interface <cap-interface-id> direction <capture-direction> stream-to <receiver_address> port <port-id>
start capture node <cap-node-id> interface <cap-interface-id> direction <capture-direction> stream-to <receiver_address> port <port-id> parameters <arguments>
start capture node <cap-node-id> vdrport <vdrport-id> direction <capture-direction>
start capture node <cap-node-id> vdrport <vdrport-id> direction <capture-direction> parameters <arguments>
start capture node <cap-node-id> vdrport <vdrport-id> direction <capture-direction> stream-to <receiver_address> port <port-id>
start capture node <cap-node-id> vdrport <vdrport-id> direction <capture-direction> stream-to <receiver_address> port <port-id> parameters <arguments>
start capture node <cap-node-id> vif <vif> direction <capture-direction>
start capture node <cap-node-id> vif <vif> direction <capture-direction> parameters <arguments>
start capture node <cap-node-id> vif <vif> direction <capture-direction> stream-to <receiver_address> port <port-id>
start capture node <cap-node-id> vif <vif> direction <capture-direction> stream-to <receiver_address> port <port-id> parameters <arguments>
start capture node <cap-node-id> vmknic <vmknic-id> direction <capture-direction>
start capture node <cap-node-id> vmknic <vmknic-id> direction <capture-direction> parameters <arguments>
start capture node <cap-node-id> vmknic <vmknic-id> direction <capture-direction> stream-to <receiver_address> port <port-id>
start capture node <cap-node-id> vmknic <vmknic-id> direction <capture-direction> stream-to <receiver_address> port <port-id> parameters <arguments>
start capture node <cap-node-id> vmnic <vmnic-id> direction <capture-direction>
start capture node <cap-node-id> vmnic <vmnic-id> direction <capture-direction> parameters <arguments>
start capture node <cap-node-id> vmnic <vmnic-id> direction <capture-direction> stream-to <receiver_address> port <port-id>
start capture node <cap-node-id> vmnic <vmnic-id> direction <capture-direction> stream-to <receiver_address> port <port-id> parameters <arguments>
start capture node <cap-node-id> vnic <vnic-id> direction <capture-direction>
start capture node <cap-node-id> vnic <vnic-id> direction <capture-direction> parameters <arguments>
start capture node <cap-node-id> vnic <vnic-id> direction <capture-direction> stream-to <receiver_address> port <port-id>
start capture node <cap-node-id> vnic <vnic-id> direction <capture-direction> stream-to <receiver_address> port <port-id> parameters <arguments>
start capture trace
start firewall <uuid> bulk-sync
start search resync <search-scope>
start service <service-name>
start upgrade-bundle <bundle-name> playbook <playbook-file>
stop capture session <session-id-arg>
stop firewall <uuid> bulk-sync
stop service <service-name>
top
traceflow <port-uuid-name> <base64-string>
traceroute <hostname-or-ip-address>
traceroute <ip-address>
traceroute <ip-address> [source <ip-address>] [maxttl <number>]
traceroute <ip-address> [source <ip-address>] [maxttl <number>] [vrfid <vrf-id>]
traceroute6 <ip-address>
traceroute6 <ip6-address> [maxttl <number>]
traceroute6 <ip6-address> [source <ip6-address>]
traceroute6 <ip6-address> [source <ip6-address>] [maxttl <number>]
traceroute6 <ip6-address> [vrfid <vrf-id>]
traceroute6 <ip6-address> [vrfid <vrf-id>] [maxttl <number>]
traceroute6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>]
traceroute6 <ip6-address> [vrfid <vrf-id>] [source <ip6-address>] [maxttl <number>]
up
verify logging-servers
verify upgrade-bundle <bundle-name>
vrf <uuid-vrfid>

About This Book

The NSX-T Command-Line Interface Reference describes how to use the NSX-T Command-Line Interface (CLI) and includes examples and command overviews.

Intended Audience

The information in this guide is written for experienced systems and network administrators who are familiar with virtual machine technology and virtual datacenter operations.

VMware Technical Publications Glossary

VMware Technical Publications provides a glossary of terms that might be unfamiliar to you. For definitions of terms as they are used in VMware technical documentation go to http://www.vmware.com/support/pubs.

Document Feedback

VMware welcomes your suggestions for improving our documentation. If you have comments, send your feedback to docfeedback@vmware.com.

Introduction to the NSX-T CLI

Each NSX-T virtual appliance contains a command-line interface (CLI). The command syntax and output format of NSX-T commands are not guaranteed to be the same from release to release. If you are automating tasks, please use the API. See the NSX-T API Guide for details.

Logging In and Out of the CLI

Before you can run CLI commands, you must connect to an NSX-T virtual appliance. You can connect to the console or through SSH.

If you did not enable SSH while installing the appliance, you can use the set service ssh start-on-boot command to enable the SSH service.

To log out, type exit from Basic mode.

CLI Command Modes

The commands available to you at any given time depend on the mode you are currently in.

  • Basic. Basic mode provides commands to manage and view the status of the NSX-T appliance.

  • VRF. VRF mode, available on NSX Edge appliances, provides commands to view properties of a VRF (Virtual Routing and Forwarding) context.

  • Tier0_sr. Tier0_sr mode, available on NSX Edge appliances, provides commands to view properties of a tier 0 service router VRF (Virtual Routing and Forwarding) context.

  • Tier1_sr. Tier0_sr mode, available on NSX Edge appliances, provides commands to view properties of a tier 1 service router VRF (Virtual Routing and Forwarding) context.

  • Path. Path mode, available on NSX Edge appliances, provides commands to view properties of the logical router interfaces and logical switch ports in the path between a logical router interface and an IP address.
  • Important Note

    Starting with NSX-T 2.1, the NSX Manager GUI uses the term N-VDS (NSX managed virtual distributed switch) to refer to what was known as host switch in previous releases. In this document, the term host switch is still used. The two terms are synonyms.

    NSX-T CLI Commands

    backup node file <filename> [passphrase <passphrase>]
    Create a backup of an NSX KeyManager node.

    If you do not provide a passphrase on the command line, you will be prompted to enter one. The passphrase is used to encrypt the backup. If you forget the passphrase, you will not be able to restore the backup.

    Important: This backup command is one part of the backup process. You must complete all backup and restore tasks in the correct order. See the NSX-T Administration Guide for information and instructions about performing backups and restores.

    Option Description
    <filename> Filename argument
    Allowed pattern: ^[^/ *;&|]+$
    <passphrase> Backup passphrase
    Example
    nsx-keymanager-1> backup node file backup-node-timestamp.tar.gz Passphrase: nsx-keymanager-1>
    Mode
    Basic
    Availability
    Key Manager

    bottom
    Move to the bottom of the path. The arrow moves to show which interface is current.
    Example
    nsx-edge-1(path)> bottom interface : de650f56-276d-46ef-959e-960752acfe19 interface : 140ca8de-61e0-4bba-b429-6a3791b0846a port : 9eff9e4e-9157-4107-a0dd-c79350dce6f7 port : 53bab4b1-f0df-451b-af80-0a9d5e580186 interface : 2a7bf881-1f89-4833-833e-47673b79901a interface : bbf5b23c-3f0a-4afe-b3b3-b19814d4dd2a port : 5b2068d0-8c28-4427-8be4-48f422f92309 port : eb3bd495-9ce3-40b4-a955-c2ddc4893cfa interface : 1fec3ffa-213d-4d2b-ae1b-e12857434846 interface : 13592f56-be3c-4d3d-88de-7d5825dd51bb port : c588fc5d-dd62-45b2-bc16-3dae466c16c7 port : 2120ef07-05e3-477f-8d96-e2be390784db interface : 3bbbd5e9-2ffe-4fb7-9edb-edc7bba67278 interface : dd10beb2-3673-43a5-b180-ecc46e830ee0 ->port : fdc429ef-d778-421b-bf84-e1063a7bf5ab
    Mode
    Path
    Availability
    Edge, Public Cloud Gateway

    clear auth-policy vidm enabled
    Clear the vidm service's enabled property.
    Example
    nsx-manager-1> clear auth-policy vidm enabled nsx-manager-1>
    Mode
    Basic
    Availability
    Manager, Policy Manager

    clear auth-policy vidm lb-extern enabled
    Clear the external load balancer enabled property.
    Example
    nsx-manager-1> clear auth-policy vidm lb-extern enabled nsx-manager-1>
    Mode
    Basic
    Availability
    Manager, Policy Manager

    clear banner
    Clear the security banner or message of the day. The banner is reset to the system default banner.
    Example
    nsx> clear banner nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    clear bfd-session local-ip <ip-address> remote-ip <ip-address> stats
    Clear the statistics for the specified BFD session
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> clear bfd-session local-ip 192.168.250.60 remote-ip 192.168.250.61 stats nsx-edge-1>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear bfd-sessions stats
    Clear the statistics for all BFD sessions.
    Example
    nsx-edge-1> clear bfd-session stats nsx-edge-1>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear bgp <ip-address>
    Reset specific BGP neighbor session.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1(tier0_sr)> clear bgp 2005::2828:280a nsx-edge-1(tier0_sr)>
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    clear bgp neighbors
    Reset all BGP neighbor sessions.
    Example
    nsx-edge-1(tier0_sr)> clear bgp neighbors nsx-edge-1(tier0_sr)>
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    clear dataplane flow-cache stats
    Clear flow cache statistics for all fastpath cores.
    Example
    nsx-edge-1> clear dataplane flow-cache stats nsx-edge-1>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear debug bgp
    Turn off BGP debugging.
    Example
    nsx-edge-1(tier0_sr)> clear debug bgp nsx-edge-1(tier0_sr)>
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    clear edge-cluster history state
    Clear the Edge cluster state history.
    Example
    nsx-edge-1> clear edge-cluster history state nsx-edge-1>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear hardening-policy mandatory-access-control enabled
    This command disables mandatory access control on the node. Usage for the command is clear hardening-policy mandatory-access-control enabled
    Example
    nsx-edge-1> clear hardening-policy mandatory-access-control enabled Mandatory Access Control is disabled.
    Mode
    Basic
    Availability
    Controller, Edge, Manager, Policy Manager, Public Cloud Gateway

    clear high-availability channel local-ip <ip-address> remote-ip <ip-address> stats
    Clear statistics for the specified high-availability channel
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> clear high-availability channel local-ip 30.0.246.232 remote-ip 30.0.29.0 stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear high-availability channels stats
    Clear statistics for all high-availability channels.
    Example
    nsx-edge-1> clear high-availability channels stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear high-availability history state
    Clear the high availability state history for the logical router in the VRF context.
    Example
    nsx-edge-1(tier1_sr)> clear high-availability history state nsx-edge-1(tier1_sr)>
    Mode
    Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    clear high-availability session local-service-id <service-id> peer-service-id <service-id> stats
    Clear statistics for the specified high-availability session
    Option Description
    <service-id> Service id (0-65535)
    Example
    nsx-edge-1> clear high-availability session local-service-id 101 peer-service-id 101 stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear high-availability sessions stats
    Clear statistics for all high-availability sessions.
    Example
    nsx-edge-1> clear high-availability sessions stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear interface <interface-name>
    Delete the specified VLAN network interface and all it's configuration. Users must configure an alternate interface for management.
    Option Description
    <interface-name> Configurable network interface argument
    Example
    nsx-edge> clear interface eth0.100 Deleted interface eth0.11. The system does not have a management IP address, you may configure one.
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear interface <interface-name> ip
    Remove all network configuration from the specified interface.
    Option Description
    <interface-name> Configurable network interface argument
    Example
    nsx-edge> clear interface eth0 ip nsx-edge>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear interface <interface-name> plane
    Clear the network interface plane configuration.
    Option Description
    <interface-name> Configurable network interface argument
    Example
    nsx-edge> clear interface eth0 plane nsx-edge>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear lldp neighbors
    Deletes LLDP Neighbor information on all devices.
    Example
    nsx-edge-1> clear lldp neighbors
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear lldp neighbors <interface-name>
    Deletes LLDP Neighbor information on given device.
    Option Description
    <interface-name> LLDP interface argument
    Example
    nsx-edge-1> clear lldp neighbors eth0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear lldp stats
    Deletes LLDP Statistics on all devices.
    Example
    nsx-edge-1> clear lldp stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear lldp stats <interface-name>
    Deletes LLDP Statistics on given device.
    Option Description
    <interface-name> LLDP interface argument
    Example
    nsx-edge-1> clear lldp stats eth0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear load-balancer <lb-uuid> pool <pool-uuid> stats
    Clear the statistics for a specific load balancer and pool. In rare cases some of the counters may not be cleared and when that happens please try issuing the command again.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <pool-uuid> Pool UUID argument
    Example
    nsx-edge-1> clear load-balancer ed785df6-2143-4944-b918-66470886be83 pool 46e57906-413e-4075-98b1-49a3e73a2c62 stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear load-balancer <lb-uuid> pools stats
    Clear the statistics for all pools of a specific load balancer. In rare cases some of the counters may not be cleared and when that happens please try issuing the command again.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> clear load-balancer ed785df6-2143-4944-b918-66470886be83 pools stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear load-balancer <lb-uuid> stats
    Clear the statistics for a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> clear load-balancer ed785df6-2143-4944-b918-66470886be83 stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear load-balancer <lb-uuid> virtual-server <vs-uuid> stats
    Clear the statistics for a specific load balancer and virtual server. In rare cases some of the counters may not be cleared and when that happens please try issuing the command again.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <vs-uuid> Virtual server UUID argument
    Example
    nsx-edge-1> clear load-balancer ed785df6-2143-4944-b918-66470886be83 virtual-server 46e57906-413e-4075-98b1-49a3e73a2c62 stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear load-balancer <lb-uuid> virtual-servers stats
    Clear the statistics for all virtual servers of a specific load balancer. In rare cases some of the counters may not be cleared and when that happens please try issuing the command again.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> clear load-balancer ed785df6-2143-4944-b918-66470886be83 virtual-servers stats
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear load-balancer perf-profile
    Clear load balancer performance profile parameter settings from edge.
    Example
    nsx-edge-1> clear load-balancer perf-profile
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear logging-servers
    Clear all logging server configuration.
    Example
    nsx> clear logging-servers nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    clear logical-router <uuid> high-availability history state
    Clear the high availability state history for the specified logical router. Only service routers have a high availability status. Use the get logical-routers command to get a list of logical routers and their router types.
    Option Description
    <uuid> UUID argument
    Example
    nsx-edge-1> clear logical-router 4e425c9e-09c6-4021-bbc7-fab2895a2c09 high-availability history state nsx-edge-1>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear management-plane
    Deletes all NSX configuration and modules from the host only. Please delete the corresponding transport node entries from NSX manager using GUI/API.
    Example
    host-1> clear management-plane host-1>
    Mode
    Basic
    Availability
    ESXi, KVM

    clear name-servers
    Clear all name servers from the DNS configuration.
    Example
    nsx> clear name-servers nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    clear physical-port <physical-port-name> stats
    Clear statistics for the specified physical port.
    Option Description
    <physical-port-name> Datapath String argument
    Example
    nsx-edge-1> clear physical-port fp-eth2 stats nsx-edge-1>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    clear search-domains
    Remove all domain names from the DNS search list.
    Example
    nsx> clear search-domains nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    clear service http redirect-host
    Clear the HTTP service redirect host.
    Example
    nsx-manager-1> clear service http redirect-host nsx-manager-1>
    Mode
    Basic
    Availability
    Manager, Policy Manager

    clear service install-upgrade enabled
    Clear the install-upgrade service's enabled property.
    Example
    nsx-manager-1> clear service install-upgrade enabled nsx-manager-1>
    Mode
    Basic
    Availability
    Manager, Policy Manager

    clear service snmp start-on-boot
    Configure the snmp service to not start on boot.
    Example
    nsx> clear service snmp start-on-boot nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    clear service ssh start-on-boot
    Configure the SSH service to not start on boot.
    Example
    nsx> clear service ssh start-on-boot nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    clear user <username> password-expiration
    Disable password expiration for the user.
    Option Description
    <username> Username of user
    Example
    nsx> clear user audit password-expiration nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    copy file <filename> url <url>
    Copy a local file to a remote destination.
    Option Description
    <filename> Existing file argument
    <url> Remote file url (e.g. scp://username@ip_address/filepath/filename)
    Example
    nsx> copy file support-bundle-0.tgz url scp://admin@192.168.210.200/home/admin/ admin@192.168.210.200's password: nsx>
    Mode
    Basic
    Availability
    Controller, Edge, NSX Cloud VM, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    copy url <url> [file <filename>]
    Copy a remote file to the local file store. If no destination file is specified, the copied file has the same file name as the source file. You can use the file argument to specify a different destination file name.
    Option Description
    <url> Remote file url (e.g. scp://username@ip_address/filepath/filename)
    <filename> Filename argument
    Allowed pattern: ^[^/ *;&|]+$
    Example
    nsx> copy url scp://admin@192.168.210.200/home/admin/file-0.txt admin@192.168.210.200's password: nsx> or nsx> copy url scp://admin@192.168.210.200/home/admin/file-1.txt file newfile-1.txt admin@192.168.210.200's password: nsx>
    Mode
    Basic
    Availability
    Controller, Edge, NSX Cloud VM, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    deactivate cluster
    Remove all other management nodes from the cluster. This will effectively convert a multi-node management cluster into a single node setup. The system will prompt for confirmation for this operation.
    Example
    nsx-manager-1> deactivate cluster Are you sure you want to remove all other nodes from this cluster (yes/no) Cluster has been deactivated. nsx-manager-1>
    Mode
    Basic
    Availability
    Manager, Policy Manager

    del all capture sessions
    Delete all packet capture sessions.
    Example
    nsx-manager> del all capture sessions Session Count: 1 Session ID: 62fd4a28-5463-4f92-af34-42e55547ec7e Session Status: deleted Start Time: 2018-07-31 07:09:36 Stop Time: 2018-07-31 07:09:51 Request: Node: af1c570b-f78d-4ea3-8858-219f9fe73511 Capture Type: vmknic Capture Value: vmk0 Capture Direction: input Capture Mode: standalone
    Mode
    Basic
    Availability
    Manager

    del capture session <esx-session-id-arg>
    Delete a packet capture session configuration.
    Option Description
    <esx-session-id-arg> Packet Capture session id parameter
    Example
    esx-1> del capture session 1 esx-1>
    Mode
    Basic
    Availability
    ESXi

    del capture session <session-id-arg>
    Delete the specified packet capture session.
    Option Description
    <session-id-arg> Packet capture session id parameter
    Example
    nsx-manager> del capture session 2e4d5f24-88a9-4d88-8af0-e588833064d9 Session ID: 2e4d5f24-88a9-4d88-8af0-e588833064d9 Session Status: deleted Start Time: 2018-07-31 07:10:35 Stop Time: 2018-07-31 07:10:45 Request: Node: af1c570b-f78d-4ea3-8858-219f9fe73511 Capture Type: vmknic Capture Value: vmk0 Capture Direction: input Capture Mode: standalone
    Mode
    Basic
    Availability
    Manager

    del capture session <session-number>
    Delete a packet capture session configuration.
    Option Description
    <session-number> Session ID argument in numbers
    Allowed values: 1, 2, 3
    Example
    kvm-1> del capture session 1 kvm-1>
    Mode
    Basic
    Availability
    KVM

    del capture session <session-number>
    Delete a packet capture session configuration.
    Option Description
    <session-number> Session ID argument in numbers
    Allowed values: 1, 2, 3
    Example
    nsx-edge-1(path)> del capture session 1 nsx-edge-1(path)>
    Mode
    Path
    Availability
    Edge, Public Cloud Gateway

    del capture session <session-number>
    Delete a packet capture session configuration.
    Option Description
    <session-number> Session ID argument in numbers
    Allowed values: 1, 2, 3
    Example
    nsx-edge-1> del capture session 1 nsx-edge-1>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    del capture session <session-number> interface <interface-name>
    Delete the specified interface from a packet capture session configuration. If you are only monitoring one interface, this deletes the monitoring session configuration.
    Option Description
    <session-number> Session ID argument in numbers
    Allowed values: 1, 2, 3
    <interface-name> Network interface argument
    Example
    kvm-1> del capture session 1 interface b592a7c8-4e21-493e-b0fc-0b1d152c949c kvm-1>
    Mode
    Basic
    Availability
    KVM

    del capture session <session-number> interface <port-uuid-name>
    Delete the specified interface from a packet capture session configuration. If you are only monitoring one interface, this deletes the monitoring session configuration.
    Option Description
    <session-number> Session ID argument in numbers
    Allowed values: 1, 2, 3
    <port-uuid-name> Datapath String argument
    Example
    nsx-edge-1> del capture session 1 interface fp-eth1 nsx-edge-1>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    del file <filename>
    Delete a local file.
    Option Description
    <filename> Existing file argument
    Example
    nsx> del file support-bundle-0.tgz nsx>
    Mode
    Basic
    Availability
    Controller, Edge, NSX Cloud VM, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    del gateway certificate <ip-address>
    Delete the host's public cloud gateway certificate
    Option Description
    <ip-address> Network IP address argument
    Example
    host-1> del gateway certificate 13.14.41.34
    Mode
    Basic
    Availability
    NSX Cloud VM

    del gateway certificates
    Delete all the host's public cloud gateway certificates
    Example
    host-1> del gateway certificates
    Mode
    Basic
    Availability
    NSX Cloud VM

    del gw-controller vm-certificate <vm-id>
    Remove public cloud VM certificate
    Option Description
    <vm-id> VM ID
    Mode
    Basic
    Availability
    Public Cloud Gateway

    del logging-server <hostname-or-ip-address[:port]> proto <proto> level <level> [facility <facility>] [messageid <messageid>] [structured-data <structured-data>]
    Delete the specified logging server configuration. You can use the get logging-servers command to display the current logging server configuration.
    Option Description
    <hostname-or-ip-address[:port]> A hostname or IP address with optional port delimited by a colon
    <proto> Logging server protocol
    Allowed values: tcp, udp, tls, li, li-tls
    <level> Level of log entries to export
    Allowed values: emerg, alert, crit, err, warning, notice, info, debug
    <facility> Comma delimited list of facilities of log entries to export
    <messageid> Comma delimited list of MSGIDs of log entries to export
    <structured-data> Structured data of log entries to export
    Allowed pattern: ^(comp|subcomp|s2comp|security|audit|reqId|ereqId|entId|errorCode|eventId|euser|threadId|splitId|splitIndex)=.+$
    Example
    nsx> del logging-server 192.168.110.60 proto udp level info facility syslog messageid SYSTEM,FABRIC structured-data audit=true nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    del name-server <ip-address>
    Delete the specified name server from the DNS configuration.
    Option Description
    <ip-address> Name server IP address argument
    Example
    nsx> del name-server 192.168.110.11 nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    del nsx
    Destroy NSX environment on this host without removing its transport node from management plane.
    Example
    host-1> del nsx host-1>
    Mode
    Basic
    Availability
    ESXi, KVM

    del ntp-server <hostname-or-ip-address>
    Remove an existing NTP server.
    Option Description
    <hostname-or-ip-address> A hostname or IP address
    Example
    nsx-manager-1> del ntp-server 172.31.32.2 nsx-manager-1>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    del route prefix <prefix> gateway <gateway-ip> [interface <interface-name>]
    Delete the specified network route.
    Option Description
    <prefix> CIDR notation argument
    <gateway-ip> Gateway IP address argument
    <interface-name> Configurable network interface argument
    Example
    nsx> del route prefix 10.10.10.0/24 gateway 192.168.110.1 nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    del search-domains <domain>
    Delete the specified domain name from the DNS search list.
    Option Description
    <domain> Search domain argument
    Example
    nsx> del search-domains eng.example.com nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    del ssh-known-host <hostname-or-ip-address[:port]>
    Delete the specified host entry from the SSH known hosts file.
    Option Description
    <hostname-or-ip-address[:port]> A hostname or IP address with optional port delimited by a colon
    Example
    nsx> del ssh-known-host 192.168.110.105 nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    del user <username> ssh-keys label <key-label> [password <password>]
    Delete any SSH key with specified label from specified user's authorized_keys file. If password is not provided in the command then you are prompted to enter it. Password is required only for users root and admin.
    Option Description
    <username> Username of user
    <key-label> Unique label for SSH key
    <password> Password of user
    Example
    nsx> del user admin ssh-keys label user1@domain1 password Pa$$w0rd nsx> or nsx> del user admin ssh-keys label user1@domain1 Password (required only for users root and admin): nsx>
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    detach management-plane <hostname-or-ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>]
    Detach this hypervisor host from the management plane. You can specify any NSX Manager in the management cluster in this command.

    Use the API username and password for the specified NSX Manager. If you do not provide a password on the command line, you will be prompted to enter one.

    Get the NSX Manager thumbprint by running the get certificate api thumbprint command on the specified NSX Manager.

    Option Description
    <hostname-or-ip-address[:port]> Hostname or IP address of an NSX Manager and optional port
    <username> Manager API username
    <thumbprint> Manager API thumbprint
    <password> Manager API password
    Example
    host-1> detach management-plane 192.168.110.105 username admin thumbprint 898b75618e3e56615d53f987a720ff22b6381f4b85bec1eb973214ff7361f8b8 Password for API user: Node successfully removed
    Mode
    Basic
    Availability
    ESXi, KVM

    detach management-plane <hostname-or-ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>]
    Detach this Edge from the management plane.
    Option Description
    <hostname-or-ip-address[:port]> Hostname or IP address of an NSX Manager and optional port
    <username> Manager API username
    <thumbprint> Manager API thumbprint
    <password> Manager API password
    Example
    nsx-edge> detach management-plane 192.168.110.105 username admin thumbprint 7f1374c339b592da504b352857a0bdc4e77b9b998a9971f9335633210f667c97 Password for API user: Node successfully deregistered
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    detach management-plane <ip-address[:port]> username <username> thumbprint <thumbprint> [password <password>]
    Detach this keymanager from the management plane. You can specify any NSX Manager in the management cluster in this command.

    Use the API username and password for the specified NSX Manager. If you do not provide a password on the command line, you will be prompted to enter one.

    Get the NSX Manager thumbprint by running the get certificate api thumbprint command on the specified NSX Manager.

    Option Description
    <ip-address[:port]> IP address of an NSX Manager and optional port
    <username> Manager API username
    <thumbprint> Manager API thumbprint
    <password> Manager API password
    Example
    nsx-keymanager-1> detach management-plane 192.168.110.105 username admin thumbprint fef089bbfbd2e10da6ee08c7ff4a95da1368587abfd2c6db59c8db540bc43e58 Password for API user: Node successfully unregistered and keymanager service stopped
    Mode
    Basic
    Availability
    Key Manager

    detach node <node-id>
    Detach the specified node from the cluster.
    Option Description
    <node-id> Node ID of cluster node to detach
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-manager-1> detach node ac5d4a62-3203-4b31-922e-d166a4f7e860 Node has been detached. Detached node must be deleted permanently. nsx-manager-1>
    Mode
    Basic
    Availability
    Manager, Policy Manager

    display capture session <session-id-arg>
    Display the result of the specified packet capture session with the tcpdump command.
    Option Description
    <session-id-arg> Packet capture session id parameter
    Example
    nsx-manager> display capture session 0fea2cac-5a13-44cf-b92e-b63f69572268 reading from file /tmp/pktcap/0fea2cac-5a13-44cf-b92e-b63f69572268.pcap, link-type EN10MB (Ethernet) 07:10:46.513603 IP w1-mvpcloud-164.eng.vmware.com.31181 > nsx-controller-leng1.eng.vmware.com.1235: Flags [.], ack 2218716988, win 128, length 0 07:10:48.460753 IP w1-mvpcloud-164.eng.vmware.com.52976 > nsx-controller-leng4.eng.vmware.com.amqps: Flags [P.], seq 768580848:768580898, ack 2927523439, win 128, length 50 07:10:48.463135 IP w1-mvpcloud-164.eng.vmware.com.52976 > nsx-controller-leng4.eng.vmware.com.amqps: Flags [P.], seq 50:100, ack 554, win 128, length 50
    Mode
    Basic
    Availability
    Manager

    display capture session <session-id-arg> parameters <arguments>
    Display packet capture result with command tcpdump.
    Option Description
    <session-id-arg> Packet capture session id parameter
    <arguments> Packet capture option parameter
    Example
    nsx-manager-1> display capture session ed0a79df-4e4d-4784-9f2a-d14327e511a1 parameters -c 2 nsx-manager-1>
    Mode
    Basic
    Availability
    Manager

    down
    Move down the path. The arrow moves to show which interface is current.
    Example
    nsx-edge-1(path)> get path interface : de650f56-276d-46ef-959e-960752acfe19 interface : 140ca8de-61e0-4bba-b429-6a3791b0846a port : 9eff9e4e-9157-4107-a0dd-c79350dce6f7 port : 53bab4b1-f0df-451b-af80-0a9d5e580186 interface : 2a7bf881-1f89-4833-833e-47673b79901a interface : bbf5b23c-3f0a-4afe-b3b3-b19814d4dd2a port : 5b2068d0-8c28-4427-8be4-48f422f92309 port : eb3bd495-9ce3-40b4-a955-c2ddc4893cfa interface : 1fec3ffa-213d-4d2b-ae1b-e12857434846 interface : 13592f56-be3c-4d3d-88de-7d5825dd51bb port : c588fc5d-dd62-45b2-bc16-3dae466c16c7 ->port : 2120ef07-05e3-477f-8d96-e2be390784db interface : 3bbbd5e9-2ffe-4fb7-9edb-edc7bba67278 interface : dd10beb2-3673-43a5-b180-ecc46e830ee0 port : fdc429ef-d778-421b-bf84-e1063a7bf5ab nsx-edge-1(path)> down interface : de650f56-276d-46ef-959e-960752acfe19 interface : 140ca8de-61e0-4bba-b429-6a3791b0846a port : 9eff9e4e-9157-4107-a0dd-c79350dce6f7 port : 53bab4b1-f0df-451b-af80-0a9d5e580186 interface : 2a7bf881-1f89-4833-833e-47673b79901a interface : bbf5b23c-3f0a-4afe-b3b3-b19814d4dd2a port : 5b2068d0-8c28-4427-8be4-48f422f92309 port : eb3bd495-9ce3-40b4-a955-c2ddc4893cfa interface : 1fec3ffa-213d-4d2b-ae1b-e12857434846 interface : 13592f56-be3c-4d3d-88de-7d5825dd51bb port : c588fc5d-dd62-45b2-bc16-3dae466c16c7 port : 2120ef07-05e3-477f-8d96-e2be390784db ->interface : 3bbbd5e9-2ffe-4fb7-9edb-edc7bba67278 interface : dd10beb2-3673-43a5-b180-ecc46e830ee0 port : fdc429ef-d778-421b-bf84-e1063a7bf5ab
    Mode
    Path
    Availability
    Edge, Public Cloud Gateway

    exit
    Exit the VRF context mode if you are in it. Otherwise, exit the CLI.
    Example
    nsx-edge-1> vrf 1 nsx-edge-1(tier1_sr)> exit nsx-edge-1>
    Mode
    Availability
    Controller, Edge, ESXi, KVM, NSX Cloud VM, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get all capture sessions
    Display information for all packet capture sessions.
    Example
    nsx-manager> get all capture sessions Session Count: 1 Session ID: 0fea2cac-5a13-44cf-b92e-b63f69572268 Session Status: stopped Start Time: 2018-07-31 07:11:54 Stop Time: 2018-07-31 07:12:10 Request: Node: af1c570b-f78d-4ea3-8858-219f9fe73511 Capture Type: vmknic Capture Value: vmk0 Capture Direction: input Capture Mode: standalone
    Mode
    Basic
    Availability
    Manager

    get arp-table
    Display the ARP table.
    Example
    nsx-manager-1> get arp-table Protocol Address Hardware Addr Type Interface Internet 192.168.110.201 00:50:56:a9:8a:8c ether eth0 Internet 192.168.110.101 00:50:56:a9:45:29 ether eth0 Internet 192.168.110.1 68:ef:bd:4e:98:7f ether eth0 Internet 192.168.110.10 00:50:56:a6:e0:14 ether eth0
    Mode
    Basic
    Availability
    Controller, Key Manager, Manager, Policy Manager

    get arp-table
    Display the ARP table.
    Example
    nsx-manager-1> get arp-table Protocol Address Hardware Addr Type Interface Internet 192.168.110.201 00:50:56:a9:8a:8c ether eth0 Internet 192.168.110.101 00:50:56:a9:45:29 ether eth0 Internet 192.168.110.1 68:ef:bd:4e:98:7f ether eth0 Internet 192.168.110.10 00:50:56:a6:e0:14 ether eth0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get auth-policy api lockout-period
    Get the amount of time, in seconds, that an account will remain locked out of the API after exceeding the maximum number of failed authentication attempts.
    Example
    nsx> get auth-policy api lockout-period 900 seconds
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get auth-policy api lockout-reset-period
    In order to trigger an account lockout, all authentication failures must occur in this time window. If the reset period exprires, the failed login count is reset to zero.
    Example
    nsx> get auth-policy api lockout-reset-period 900 seconds
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get auth-policy api max-auth-failures
    Get the number of failed API authentication attempts that are allowed before the account is locked. If set to 0, account lockout is disabled.
    Example
    nsx> get auth-policy api max-auth-failures 5
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get auth-policy cli lockout-period
    Get the amount of time, in seconds, that an account will remain locked out of the CLI after exceeding the maximum number of failed authentication attempts.
    Example
    nsx> get auth-policy cli lockout-period 900 seconds
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get auth-policy cli max-auth-failures
    Get the number of failed CLI authentication attempts that are allowed before the account is locked. If set to 0, account lockout is disabled.
    Example
    nsx> get auth-policy cli max-auth-failures 3
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get auth-policy minimum-password-length
    Get the minimum number of characters that passwords must have.
    Example
    nsx> get auth-policy minimum-password-length 8 characters
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get auth-policy vidm
    Get the vidm's properties.
    Example
    nsx-manager-1> get auth-policy vidm nsx-manager-1> LB enabled: True vIDM Enabled: True Hostname: jt-vidm.eng.vmware.com Thumbprint: 898b75618e3e56615d53f987a720ff22b6381f4b85bec1eb973214ff7361f8b8 Client Id: OAuth2Client_NsxClientId Node Hostname: jt-nsx.eng.vmware.com
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get bfd-config
    Display parameters defined in global logical router BFD
    Example
    nsx-edge(tier0_sr)> get bfd-config Logical Router UUID : d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 vrf : 6 lr-id : 6 name : type : SERVICE_ROUTER_TIER0 BFD global configuration Enabled : True Min RX Interval: 1000 Min TX Interval: 1000 Min RX TTL : 255 Multiplier : 3 Port : 4451c48f-8cff-4444-8e10-bff403783dca BFD session configuration Source : 192.168.50.1 Peer : 192.168.50.10 Enabled : True Min RX Interval: 1000 Min TX Interval: 1000 RX TTL : 255 Multiplier : 3 Source : 192.168.50.1 Peer : 192.168.50.20 Enabled : True Min RX Interval: 3000 Min TX Interval: 3000 RX TTL : 255 Multiplier : 5
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bfd-session local-ip <ip-address> remote-ip <ip-address>
    Display information about the specified BFD session.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get bfd-session local-ip 192.168.250.60 remote-ip 192.168.250.61 BFD Session Diag : Control Detection Time Expired(from local) Forwarding : last true (current true) Last_down_time : 2016-02-09 22:38:47 Last_up_time : 2016-02-09 22:38:52 Local_address : 192.168.250.60 Remote_address : 192.168.250.61 Remote_diag : No Diagnostic Remote_state : up Rx_cfg_min : 500 Rx_interval : 500 State : up Tx_cfg_min : 100 Tx_interval : 500
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get bfd-session local-ip <ip-address> remote-ip <ip-address> stats
    Display statistics for the specified BFD session.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get bfd-session local-ip 192.168.250.60 remote-ip 192.168.250.61 stats BFD Session Admin_down_count : 0 Cpath_down_count : 0 Down_count : 1 Local_address : 192.168.250.60 Remote_address : 192.168.250.61 Rx_drop : 0 Rx_drop_admin_down : 0 Rx_drop_auth_set : 0 Rx_drop_bad_version : 0 Rx_drop_intf_unmatch : 0 Rx_drop_multipoint_set: 0 Rx_drop_null_my_disc : 0 Rx_drop_null_your_disc: 0 Rx_drop_pkt_len_unmatch: 0 Rx_drop_pkt_too_short: 0 Rx_drop_rx_ttl_small : 0 Rx_drop_your_disc_unmatch: 0 Rx_drop_zero_multipier: 0 Rx_packets : 44993 Tx_error : 0 Tx_packets : 49249 Up_count : 2
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get bfd-sessions
    Display information about BFD sessions.
    Example
    nsx-edge-1> get bfd-sessions BFD Session Diag : Control Detection Time Expired(from local) Forwarding : last true (current true) Last_down_time : 2016-02-09 22:38:47 Last_up_time : 2016-02-09 22:38:52 Local_address : 192.168.250.60 Remote_address : 192.168.250.62 Remote_diag : No Diagnostic Remote_state : up Rx_cfg_min : 500 Rx_interval : 500 State : up Tx_cfg_min : 100 Tx_interval : 500 BFD Session Diag : Control Detection Time Expired(from local) Forwarding : last true (current true) Last_down_time : 2016-02-09 22:38:47 Last_up_time : 2016-02-09 22:38:52 Local_address : 192.168.250.60 Remote_address : 192.168.250.61 Remote_diag : No Diagnostic Remote_state : up Rx_cfg_min : 500 Rx_interval : 500 State : up Tx_cfg_min : 100 Tx_interval : 500
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get bfd-sessions [stats]
    Display BFD sessions in a logical router
    Example
    nsx-edge(tier0_sr)> get bfd-sessions BFD Session Dest_port : 3784 Diag : No Diagnostic Encap : vlan Forwarding : last false (current false) Interface : 4451c48f-8cff-4444-8e10-bff403783dca Last_cp_diag : No Diagnostic Last_cp_rmt_diag : No Diagnostic Last_cp_rmt_state : admin_down Last_cp_state : admin_down Last_fwd_state : NONE Local_address : 192.168.50.1 Local_discr : 2830404107 Min_rx_ttl : 255 Multiplier : 5 Prev_failure_diag : No Diagnostic Received_remote_diag : No Diagnostic Received_remote_state : down Remote_address : 192.168.50.20 Remote_admin_down : false Remote_diag : No Diagnostic Remote_discr : 0 Remote_min_rx_interval : 0 Remote_min_tx_interval : 0 Remote_multiplier : 0 Remote_state : down Rx_cfg_min : 3000 Rx_interval : 3000 Session_type : LR_PORT State : down Tx_cfg_min : 3000 Tx_interval : 3000 . . .
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bfd-sessions stats
    Display the BFD sessions statistics.
    Example
    nsx-edge-1> get bfd-sessions stats BFD Global Counters Bfd_sessions_count : 2 Last_notify_time : 2016-02-09 22:38:52 Last_nsxa_msg_receive_time: 2016-02-09 22:38:52 Nsxa_connect_count : 1 Nsxa_disconnect_count: 0 Nsxa_err_msg_receive_count: 0 Nsxa_msg_receive_count: 166085 Nsxa_notify_count : 107287 Rx_drop_bad_csum : 0 Rx_drop_count : 32 Rx_drop_intf_type : 0 Rx_drop_ip_mismatch : 0 Rx_drop_non_bfd : 0 Rx_drop_non_udp : 0 Rx_drop_null_bfd_session: 32 Rx_drop_null_intf : 0 Rx_drop_runt_pkt : 0 Rx_drop_udp_len : 0 BFD Session Admin_down_count : 0 Cpath_down_count : 0 Down_count : 1 Local_address : 192.168.250.60 Remote_address : 192.168.250.62 Rx_drop : 0 Rx_drop_admin_down : 0 Rx_drop_auth_set : 0 Rx_drop_bad_version : 0 Rx_drop_intf_unmatch : 0 Rx_drop_multipoint_set: 0 Rx_drop_null_my_disc : 0 Rx_drop_null_your_disc: 0 Rx_drop_pkt_len_unmatch: 0 Rx_drop_pkt_too_short: 0 Rx_drop_rx_ttl_small : 0 Rx_drop_your_disc_unmatch: 0 Rx_drop_zero_multipier: 0 Rx_packets : 44754 Tx_error : 0 Tx_packets : 48989 Up_count : 2 . . .
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get bgp
    Display all IPv4 & IPv6 BGP routes.
    Example
    nsx-edge-1(tier0_sr)> get bgp BGP table version is 1, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 111.111.0.0/16 100.64.0.1 0 100 32768 2000 ? > 2003::/24 :: 0 100 32768 2000 ? > 2002::/64 fca9:1c1c:96b2:e000::2 0 100 32768 2000 ? > 2001::/64 fca9:1c1c:96b2:e000::2 0 100 32768 2000 ?
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp <prefix>
    Display detailed information about BGP IPv4 route.
    Option Description
    <prefix> Network Address argument
    Example
    nsx-edge-1(tier0_sr)> get bgp 111.111.0.0/16 BGP routing table entry for 111.111.0.0/16 Prefix advertised to: 50.50.50.10 1 Paths available: Origin incomplete, Metric 0, LocalPref 100, Weight 32768, best, valid Peer is 0.0.0.0 with router id 50.50.50.1 Last Updated: Sat Dec 8 03:54:07 2018
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp <prefix>
    Display detailed information about BGP IPv6 route.
    Option Description
    <prefix> Network Address argument
    Example
    nsx-edge-1(tier0_sr)> get bgp 2003::/24 BGP routing table entry for 2003::/24 Prefix advertised to: 1 Paths available: Origin incomplete, Metric 0, LocalPref 100, Weight 32768, best, valid Peer is :: with router id 50.50.50.1 Last Updated: Sat Dec 8 03:54:06 2018
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp community { NO_EXPORT | NO_ADVERTISE | NO_EXPORT_SUBCONFED | AA:NN }
    Display all BGP NLRI matching the community.
    Option Description
    <bgp-community> BGP community argument, either NO_EXPORT, NO_ADVERTISE, NO_EXPORT_SUBCONFED or community in AA:NN format
    Example
    nsx-edge-1(tier0_sr)> get bgp community 1:1 BGP table version is 1, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 111.111.0.0/16 100.64.0.1 0 100 32768 2000 ? > 2003::/24 :: 0 100 32768 2000 ?
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp ipv4
    Display all IPv4 BGP routes.
    Example
    nsx-edge-1(tier0_sr)> get bgp ipv4 BGP table version is 1, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 111.111.0.0/16 100.64.0.1 0 100 32768 2000 ?
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp ipv6
    Display all IPv6 BGP routes.
    Example
    nsx-edge-1(tier0_sr)> get bgp ipv6 BGP table version is 3, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 2003::/24 :: 0 100 32768 2000 ? > 2002::/64 fca9:1c1c:96b2:e000::2 0 100 32768 2000 ? > 2001::/64 fca9:1c1c:96b2:e000::2 0 100 32768 2000 ?
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp neighbor
    Display all BGP neighbor information.
    Example
    nsx-edge-1(tier0_sr)> get bgp neighbor BGP neighbor is 50.50.50.10, remote AS 1000, local AS 2000, external link Hostname: prome-mdt-dhcp412 BGP version 4, remote router ID 50.50.50.10, local router ID 50.50.50.1 BGP state = Established, up for 2d13h18m Last read 00:00:00, Last write 00:00:02 Hold time is 180, keepalive interval is 60 seconds Configured hold time is 180, keepalive interval is 60 seconds Neighbor capabilities: 4 Byte AS: advertised and received AddPath: IPv4 Unicast: RX advertised IPv4 Unicast and received Route refresh: advertised and received(old & new) Address Family IPv4 Unicast: advertised and received Hostname Capability: advertised (name: nsx-edge-1,domain name: n/a) received (name: prome-mdt-dhcp412,domain name: n/a) Graceful Restart Capabilty: advertised and received Remote Restart timer is 120 seconds Address families by peer: none Graceful restart informations: End-of-RIB send: IPv4 Unicast End-of-RIB received: IPv4 Unicast Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 14 13 Notifications: 2 16 Updates: 10 10 Keepalives: 3822 3817 Route Refresh: 0 0 Capability: 0 0 Total: 3848 3856 Minimum time between advertisement runs is 0 seconds Update source is 50.50.50.1 For address family: IPv4 Unicast Update group 49, subgroup 49 Packet Queue length 0 Community attribute sent to this neighbor(all) 0 accepted prefixes Connections established 6; dropped 5 Last reset 2d13h18m, due to Interface down Local host: 50.50.50.1, Local port: 179 Foreign host: 50.50.50.10, Foreign port: 39948 Nexthop: 50.50.50.1 Nexthop global: 2005::2828:2801 Nexthop local: fe80::53ff:feb2:c1ad BGP connection: shared network BGP Connect Retry Timer in Seconds: 120 Estimated round trip time: 1 ms Read thread: on Write thread: on BFD Status: peer 50.50.50.10 status down
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp neighbor <ip-address>
    Display information about a specifie BGP neighbor.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1(tier0_sr)> get bgp neighbor 50.50.50.10 BGP neighbor is 50.50.50.10, remote AS 1000, local AS 2000, external link Hostname: prome-mdt-dhcp412 BGP version 4, remote router ID 50.50.50.10, local router ID 50.50.50.1 BGP state = Established, up for 2d13h46m Last read 00:00:30, Last write 00:00:32 Hold time is 180, keepalive interval is 60 seconds Configured hold time is 180, keepalive interval is 60 seconds Neighbor capabilities: 4 Byte AS: advertised and received AddPath: IPv4 Unicast: RX advertised IPv4 Unicast and received Route refresh: advertised and received(old & new) Address Family IPv4 Unicast: advertised and received Hostname Capability: advertised (name: nsx-edge-1,domain name: n/a) received (name: prome-mdt-dhcp412,domain name: n/a) Graceful Restart Capabilty: advertised and received Remote Restart timer is 120 seconds Address families by peer: none Graceful restart informations: End-of-RIB send: IPv4 Unicast End-of-RIB received: IPv4 Unicast Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 14 13 Notifications: 2 16 Updates: 10 10 Keepalives: 3850 3845 Route Refresh: 0 0 Capability: 0 0 Total: 3876 3884 Minimum time between advertisement runs is 0 seconds Update source is 50.50.50.1 For address family: IPv4 Unicast Update group 49, subgroup 49 Packet Queue length 0 Community attribute sent to this neighbor(all) 0 accepted prefixes Connections established 6; dropped 5 Last reset 2d13h46m, due to Interface down Local host: 50.50.50.1, Local port: 179 Foreign host: 50.50.50.10, Foreign port: 39948 Nexthop: 50.50.50.1 Nexthop global: 2005::2828:2801 Nexthop local: fe80::53ff:feb2:c1ad BGP connection: shared network BGP Connect Retry Timer in Seconds: 120 Estimated round trip time: 1 ms Read thread: on Write thread: on BFD Status: peer 50.50.50.10 status down
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp neighbor <ip-address> advertised-routes
    Display routes advertised to a BGP neighbor.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1(tier0_sr)> get bgp neighbor 50.50.50.10 advertised-routes BGP table version is 1, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 111.111.0.0/16 100.64.0.1 0 100 32768 2000 ?
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp neighbor <ip-address> routes
    Display routes learnt from a BGP neighbor.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1(tier0_sr)> get bgp neighbor 50.50.50.10 routes BGP table version is 1, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 11.11.0.0/16 100.64.0.2 0 100 32768 2000 ?
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bgp neighbor summary
    Display summarized BGP neighbor information.
    Example
    nsx-edge-1(tier0_sr)> get bgp neighbor summary BFD States: NC - Not configured, AC - Activating,DC - Disconnected AD - Admin down, DW - Down, IN - Init,UP - Up BGP summary information for VRF default for address-family: ipv4Unicast Router ID: 50.50.50.1 Local AS: 2000 Neighbor AS State Up/DownTime BFD InMsgs OutMsgs InPfx OutPfx 50.50.50.10 1000 Estab 2d13h52m DW 3890 3882 0 1 BFD States: NC - Not configured, AC - Activating,DC - Disconnected AD - Admin down, DW - Down, IN - Init,UP - Up BGP summary information for VRF default for address-family: ipv6Unicast Router ID: 50.50.50.1 Local AS: 2000 Neighbor AS State Up/DownTime BFD InMsgs OutMsgs InPfx OutPfx 2005::2828:280a 1000 Idle never NC 0 0 0 0
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get bond <bond name> [stats]
    Display the bond interface with the specified name. Specify the stats argument to display the statistics for the interface.
    Option Description
    <bond-name> Datapath device name argument
    Example
    nsx-edge-1> get bond bond0 Bond Hash algorithm : layer 2+3+4 Mode : lacp active Name : bond0 Port id : 2 Slaves : Name : fp-eth0 LACP state : Local admin key : 11 Local oper key : 11 Local oper port state : ACT FTO AGG DEF Local port internal state: LACP_ENABLED Local port number : 1 Local port priority : 255 Local port rx machine state: DEFAULTED Local timeout cfg : fast Partner age in sec : 2 Partner device id : 00:00:00:00:00:00 Partner mode : LACP passive Partner oper key : 0 Partner oper port state: Partner port number : 0 Partner port priority : 0 Partner timeout cfg : slow State : stand-alone State : active Name : fp-eth1 LACP state : Local admin key : 11 Local oper key : 11 Local oper port state : ACT FTO AGG DEF Local port internal state: LACP_ENABLED Local port number : 2 Local port priority : 255 Local port rx machine state: DEFAULTED Local timeout cfg : fast Partner age in sec : 2 Partner device id : 00:00:00:00:00:00 Partner mode : LACP passive Partner oper key : 0 Partner oper port state: Partner port number : 0 Partner port priority : 0 Partner timeout cfg : slow State : stand-alone State : active Status : up nsx-edge-1> get bond bond0 stats Bond Name : bond0 Slaves : Name : fp-eth0 LACP drops : 0 Rx LACP errors : 0 Rx LACP pdus : 10 Tx LACP errors : 0 Tx LACP pdus : 10 Name : fp-eth1 LACP drops : 0 Rx LACP errors : 0 Rx LACP pdus : 10 Tx LACP errors : 0 Tx LACP pdus : 10 name : bond0 rx_bytes : 1488 rx_drop_no_match : 0 rx_errors : 0 rx_misses : 0 rx_nombufs : 0 rx_packets : 12 tx_bytes : 0 tx_drops : 0 tx_errors : 0 tx_packets : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get bonds [stats]
    Display all bond interfaces. Specify the stats argument to display the statistics for the interfaces.
    Example
    nsx-edge-1> get bonds Bond Hash algorithm : layer 2+3+4 Mode : lacp active Name : bond0 Port id : 2 Slaves : Name : fp-eth0 LACP state : Local admin key : 11 Local oper key : 11 Local oper port state : ACT FTO AGG DEF Local port internal state: LACP_ENABLED Local port number : 1 Local port priority : 255 Local port rx machine state: DEFAULTED Local timeout cfg : fast Partner age in sec : 2 Partner device id : 00:00:00:00:00:00 Partner mode : LACP passive Partner oper key : 0 Partner oper port state: Partner port number : 0 Partner port priority : 0 Partner timeout cfg : slow State : stand-alone State : active Name : fp-eth1 LACP state : Local admin key : 11 Local oper key : 11 Local oper port state : ACT FTO AGG DEF Local port internal state: LACP_ENABLED Local port number : 2 Local port priority : 255 Local port rx machine state: DEFAULTED Local timeout cfg : fast Partner age in sec : 2 Partner device id : 00:00:00:00:00:00 Partner mode : LACP passive Partner oper key : 0 Partner oper port state: Partner port number : 0 Partner port priority : 0 Partner timeout cfg : slow State : stand-alone State : active Status : up nsx-edge-1> get bonds stats Bond Name : bond0 Slaves : Name : fp-eth0 LACP drops : 0 Rx LACP errors : 0 Rx LACP pdus : 10 Tx LACP errors : 0 Tx LACP pdus : 10 Name : fp-eth1 LACP drops : 0 Rx LACP errors : 0 Rx LACP pdus : 10 Tx LACP errors : 0 Tx LACP pdus : 10 name : bond0 rx_bytes : 1488 rx_drop_no_match : 0 rx_errors : 0 rx_misses : 0 rx_nombufs : 0 rx_packets : 12 tx_bytes : 0 tx_drops : 0 tx_errors : 0 tx_packets : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get bridge <uuid>
    Display information about the specified bridge.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get bridge 69377c84-c661-4935-956b-e42399411b2b Bridge ------------------------------------------------------------------------------------- Bridge UUID : 69377c84-c661-4935-956b-e42399411b2b DVS name : nsxvswitch Ref count : 2 Number of networks : 2 Number of uplinks : 0
    Mode
    Basic
    Availability
    ESXi

    get bridge <uuid> mac-table
    Display MAC table for the specified bridge.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get bridge 255e190d-2a9e-4ca0-917e-80dfbb89ac34 mac-table Bridge MAC Table ----------------------------------------------------------------------------------------------- MAC Address Type VLAN ID VXLAN ID Destination Port Age =============================================================================================== 00:50:56:86:7c:9f Dynamic 0 33672 50331650 2 00:50:56:86:ee:f1 Dynamic 16 0 50331650 2
    Mode
    Basic
    Availability
    ESXi

    get bridge <uuid> networks
    Display networks on the specified bridge.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get bridge 69377c84-c661-4935-956b-e42399411b2b networks Bridge Networks ----------------------------------------------------------------------------------------------- Network name : vxlan-48009-type-bridging Ref count : 2 Network type : 1 VLAN ID : 0 VXLAN ID : 48009 Ageing time : 300 Fdb entry hold time : 1 FRP filter enable : True port ID : 50331679 Ref count : 1 VLAN ID : 4095 IOChains installed : 0 Network name : vlan-150-type-bridging Ref count : 2 Network type : 1 VLAN ID : 150 VXLAN ID : 0 Ageing time : 300 Fdb entry hold time : 1 FRP filter enable : True port ID : 50331679 Ref count : 1 VLAN ID : 4095 IOChains installed : 0
    Mode
    Basic
    Availability
    ESXi

    get bridges
    Display information about bridges on this bridge node.
    Example
    esx-1> get bridges Bridges Summary ---------------------------------------------------------------------- Bridge UUID Number of networks Ref count 69377c84-c661-4935-956b-e42399411b2b 2 1
    Mode
    Basic
    Availability
    ESXi

    get capture session <esx-session-id-arg>
    Display information about the specified packet capture session.
    Option Description
    <esx-session-id-arg> Packet Capture session id parameter
    Example
    esx-1> get capture session 1 Packet Capture Session ID : 1 PORT : b2dce32f-8312-4c10-a7fe-320d4cb226ff VNI : 24580
    Mode
    Basic
    Availability
    ESXi

    get capture session <session-id-arg>
    Display information for the specified packet capture session.
    Option Description
    <session-id-arg> Packet capture session id parameter
    Example
    nsx-manager-leng5> get capture session 0fea2cac-5a13-44cf-b92e-b63f69572268 Session ID: 0fea2cac-5a13-44cf-b92e-b63f69572268 Session Status: stopped Start Time: 2018-07-31 07:11:54 Stop Time: 2018-07-31 07:12:10 Request: Node: af1c570b-f78d-4ea3-8858-219f9fe73511 Capture Type: vmknic Capture Value: vmk0 Capture Direction: input Capture Mode: standalone
    Mode
    Basic
    Availability
    Manager

    get capture session <session-number>
    Display information about the specified packet capture session.
    Option Description
    <session-number> Session ID argument in numbers
    Allowed values: 1, 2, 3
    Example
    nsx-edge-1> get capture session 1 Packet Capture Session ID : 1 PORTS : ['fp-eth0', 'fp-eth1']
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get capture session <session-number>
    Display information about the specified packet capture session.
    Option Description
    <session-number> Session ID argument in numbers
    Allowed values: 1, 2, 3
    Example
    kvm-1> get capture session 1 Packet Capture Session ID : 1 PORTS : ['b592a7c8-4e21-493e-b0fc-0b1d152c949c']
    Mode
    Basic
    Availability
    KVM

    get capture sessions
    Display configured packet capture sessions.
    Example
    esx-1> get capture sessions Packet Capture Session ID : 0 PORT : b2dce32f-8312-4c10-a7fe-320d4cb226ff VNI : 24580 Packet Capture Session ID : 1 PORT : 10 Packet Capture Session ID : 2 TRACE : True Packet Capture Session ID : 3 PORT : uplink1
    Mode
    Basic
    Availability
    ESXi

    get capture sessions
    Display configured packet capture sessions. Session 0 is reserved for captures started with the start capture interface <interface-name> command.
    Example
    kvm-1> get capture sessions Packet Capture Session ID : 0 PORTS : [] Packet Capture Session ID : 1 PORTS : ['b592a7c8-4e21-493e-b0fc-0b1d152c949c'] Packet Capture Session ID : 2 PORTS : ['b592a7c8-4e21-493e-b0fc-0b1d152c949c', 'd0c59cee-6095-5eeb-815b-ae6732d749e4'] Packet Capture Session ID : 3 PORTS : []
    Mode
    Basic
    Availability
    KVM

    get capture sessions
    Display configured packet capture sessions. Session 0 is reserved for captures started with the start capture interface <interface-name> command.
    Example
    nsx-edge-1> get capture sessions Packet Capture Session ID : 0 PORTS : [] Packet Capture Session ID : 1 PORTS : ['fp-eth0', 'fp-eth1'] Packet Capture Session ID : 2 PORTS : ['d0c59cee-6095-5eeb-815b-ae6732d749e4'] Packet Capture Session ID : 3 PORTS : []
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get certificate api
    Display the API server's certificate.
    Example
    nsx-manager-1> get certificate api -----BEGIN CERTIFICATE----- MIIDfzCCAmegAwIBAgIEVQEDTTANBgkqhkiG9w0BAQsFADBwMQswCQYDVQQGEwJVUzELMAkGA1UE ... /JbzbimmEgaC3Yy5rOZXUnhn+dANkUShIeGIpOnH7rpLrrPYcB1Hx31jieY= -----END CERTIFICATE-----
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get certificate api thumbprint
    Display the API server's certificate thumbprint.
    Example
    nsx-manager-1> get certificate api thumbprint 82d99b793ff84f1f1f01f420656975522a03b9bebe87c50bcff80e7d3ebe8705
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get certificate cluster
    Display the clsuter certificate.
    Example
    nsx-manager-1> get certificate cluster -----BEGIN CERTIFICATE----- MIIDfjCCAmagAwIBAgIETzOK8zANBgkqhkiG9w0BAQsFADBlMQswCQYDVQQGEwJV ... QaWyyFxNFfuCLibJPuiO5scGJmGB6UvZLGt/7stcuLIQ3A== -----END CERTIFICATE-----
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get certificate cluster thumbprint
    Display the cluster certificate thumbprint.
    Example
    nsx-manager-1> get certificate cluster thumbprint 40a5d453ea43ef1e21597d9d14749d4c6b0874402ed0b4c2d6a212a4fe7819c5
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get cgroup <uuid> [<translation-type>]
    Display the translations for the specified container group. Optionally specify a translation type to display translations of that type.
    Option Description
    <uuid> Cgroup identifier
    <translation-type> Translation type
    Allowed values: logical-objects, ips, vifs, macs, tns, vms
    Example
    nsx-controller-1> get cgroup 2d22c229-bffb-405a-8246-8e50c01d1fc6 logical-objects id: 2d22c229-bffb-405a-8246-8e50c01d1fc6, type: Container id: 1d467d11-df42-4eff-96d0-3018c0fc6e93, type: Container id: 6e05fa9f-72d2-4102-8970-d93a301b93d8, type: Container
    Mode
    Basic
    Availability
    Controller

    get cgroups
    Display all container groups.
    Example
    nsx-controller-1> get cgroups id: 2d22c229-bffb-405a-8246-8e50c01d1fc6, type: Container id: 31c4853f-3e2e-458b-ad64-6164c66ebb66, type: Container id: fb4781b1-a748-4009-bfa6-06ab7edeb98e, type: Container id: d807d5d9-f9ca-4863-8ab5-b209ba42ed64, type: Container
    Mode
    Basic
    Availability
    Controller

    get cgroups with ip <ip-address>
    Display container groups with the specified IP address.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-controller-1> get cgroups with ip 192.168.1.2 id: fb4781b1-a748-4009-bfa6-06ab7edeb98e, type: Container
    Mode
    Basic
    Availability
    Controller

    get cgroups with mac <hardware-address>
    Display container groups with the specified MAC address.
    Option Description
    <hardware-address> Network hardware address argument
    Example
    nsx-controller-1> get cgroups with mac 00:50:56:8e:13:51 id: 31c4853f-3e2e-458b-ad64-6164c66ebb66, type: Container
    Mode
    Basic
    Availability
    Controller

    get cgroups with vif <vif>
    Display container groups with the specified network interface.
    Option Description
    <vif> VIF ID
    Example
    nsx-controller-1> get cgroups with vif vif-15 id: d807d5d9-f9ca-4863-8ab5-b209ba42ed64, type: Container
    Mode
    Basic
    Availability
    Controller

    get cli-timeout
    Show inactivity timeout in seconds.
    Example
    nsx> get cli-timeout 1200 seconds
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get clock
    Display the current date and time.
    Example
    nsx> get clock Sat Dec 12 2015 UTC 00:11:33.168
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get cluster config
    Get Cluster Config.
    Example
    nsx-manager-1> get cluster config Cluster Id: 27589e28-66c1-4fa4-aca9-7c336d43a276 Cluster Configuration Version: 1 Number of nodes in the cluster: 2 Node UUID: ac5d4a62-3203-4b31-922e-d166a4f7e860 Node Status: JOINED ENTITY UUID IP ADDRESS PORT FQDN DATASTORE b920c7ef-b951-4490-9d82-0314074a10d9 192.168.0.2 9000 nsxmanager-sb-16755132-1 MANAGER d1763d71-d660-458d-bbb4-39c103cab7ae 192.168.0.2 - nsxmanager-sb-16755132-1 CLUSTER_BOOT_MANAGER 3ddbc3d4-16a6-404d-9737-b8e7726f89eb 192.168.0.2 - nsxmanager-sb-16755132-1 HTTP 560ddc87-d318-4a2f-ad48-89678126dd20 192.168.0.2 443 nsxmanager-sb-16755132-1 Node UUID: f024fffb-e63e-4b58-88ba-a92b01467460 Node Status: JOINED ENTITY UUID IP ADDRESS PORT FQDN DATASTORE dedb1f73-82a5-4c3f-a26e-cabe80c60151 192.168.0.3 9000 nsxmanager-sb-16755132-2 MANAGER 5311d3c2-4840-49c3-81e2-a524e5af0245 192.168.0.3 - nsxmanager-sb-16755132-2 CLUSTER_BOOT_MANAGER e17a1a5e-eb89-431c-b27c-a5346078468d 192.168.0.3 - nsxmanager-sb-16755132-2 HTTP c82547f6-e75c-473b-ba69-54ec4986390a 192.168.0.3 443 nsxmanager-sb-16755132-2
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get cluster status
    Get status of all the groups.
    Example
    nsx-manager-1> get cluster status Cluster Id: 27589e28-66c1-4fa4-aca9-7c336d43a276 Group Type: HTTP Group Status: STABLE Members: UUID FQDN IP STATUS c0a1cbad-2506-400d-be22-9fd4d71c9a6f nsx-a01.vmware.com 1.1.1.1 UP Group Type: CLUSTER_BOOT_MANAGER Group Status: STABLE Members: UUID FQDN IP STATUS 331dcb2e-c339-4111-bc74-3fed715d735e nsx-a01.vmware.com 1.1.1.1 UP Group Type: DATASTORE Group Status: STABLE Members: UUID FQDN IP STATUS c3801017-42ba-45d2-9ef7-f4f9717c49a2 nsx-a01.vmware.com 1.1.1.1 UP Group Type: MANAGER Group Status: STABLE Members: UUID FQDN IP STATUS dfb2eea5-cd45-40c7-be0d-683f277c1bbf nsx-a01.vmware.com 1.1.1.1 UP
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get cluster status verbose
    Get status of all the groups. Show leadership if there is any.
    Example
    nsx-manager-1> get cluster status verbose Cluster Id: 27589e28-66c1-4fa4-aca9-7c336d43a276 Group Type: HTTP Group Status: STABLE Members: UUID FQDN IP STATUS c0a1cbad-2506-400d-be22-9fd4d71c9a6f nsx-a01.vmware.com 1.1.1.1 UP Group Type: CLUSTER_BOOT_MANAGER Group Status: STABLE Members: UUID FQDN IP STATUS 331dcb2e-c339-4111-bc74-3fed715d735e nsx-a01.vmware.com 1.1.1.1 UP Group Type: DATASTORE Group Status: STABLE Members: UUID FQDN IP STATUS c3801017-42ba-45d2-9ef7-f4f9717c49a2 nsx-a01.vmware.com 1.1.1.1 UP Group Type: MANAGER Group Status: STABLE Members: UUID FQDN IP STATUS dfb2eea5-cd45-40c7-be0d-683f277c1bbf nsx-a01.vmware.com 1.1.1.1 UP Leaders: SERVICE LEADER LEASE VERSION POLICY_SVC_GROUPING dfb2eea5-cd45-40c7-be0d-683f277c1bbf 379 ActivityPurger dfb2eea5-cd45-40c7-be0d-683f277c1bbf 379 POLICY_SVC_IDENTITY dfb2eea5-cd45-40c7-be0d-683f277c1bbf 379
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get configuration
    Display configuration settings in command line syntax.
    Example
    nsx> get configuration ! set route prefix 0.0.0.0/0 gateway 192.168.110.1 interface eth0 set route prefix 192.168.110.0/24 interface eth0 set search-domains example.com set timezone Etc/UTC set name-servers 192.168.110.10 set ntp-server 0.ubuntu.pool.ntp.org set ntp-server 1.ubuntu.pool.ntp.org set ntp-server 2.ubuntu.pool.ntp.org set ntp-server 3.ubuntu.pool.ntp.org set ntp-server ntp.ubuntu.com set hostname nsx
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get controllers
    Display the controllers connected to this node.
    Example
    nsx> get controllers Controller IP Port SSL Status Is Physical Master Session State Controller FQDN NA 1234 enabled not used false null CCP1.COM 10.160.193.174 1234 enabled connected true up CCP2.COM NA 1234 enabled not used false null CCP3.COM
    Mode
    Basic
    Availability
    Edge, ESXi, KVM, Public Cloud Gateway

    get cpu-stats
    Display the system CPU information.
    Example
    nsx-manager-1> get cpu-stats processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 62 model name : Intel(R) Xeon(R) CPU E5-2440 v2 @ 1.90GHz stepping : 4 microcode : 0x427 cpu MHz : 1900.000 cache size : 20480 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm ida arat pln pts dtherm fsgsbase tsc_adjust smep bogomips : 3800.00 clflush size : 64 cache_alignment : 64 address sizes : 42 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 62 model name : Intel(R) Xeon(R) CPU E5-2440 v2 @ 1.90GHz stepping : 4 microcode : 0x427 cpu MHz : 1900.000 cache size : 20480 KB physical id : 2 siblings : 1 core id : 0 cpu cores : 1 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm ida arat pln pts dtherm fsgsbase tsc_adjust smep bogomips : 3800.00 clflush size : 64 cache_alignment : 64 address sizes : 42 bits physical, 48 bits virtual power management:
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get current
    Display information about the current interface.
    Example
    nsx-edge-1(path)> get current { "admin": "up", "enable-firewall": false, "enable-span": false, "force-reassemble": false, "ifuid": 289, "ifuuid": "de650f56-276d-46ef-959e-960752acfe19", "internal_operation": "up", "ipns": [ "192.168.130.3/24" ], "lrouter": "f2a25dd6-4ceb-4bf5-8ad5-3e80d2970d60", "mac": "02:50:56:00:00:04", "mtu": 1600, "peer": "54710465-99a0-481b-ac04-2ff4eda2f270", "redirect-to-kernel": true, "stats": { "rx_bytes": 1564840, "rx_drop_blocked": 0, "rx_drop_dst_unsupported": 0, "rx_drop_firewall": 0, "rx_drop_ipv6": 0, "rx_drop_kni": 0, "rx_drop_l4port_unsupported": 0, "rx_drop_malformed": 0, "rx_drop_no_receiver": 0, "rx_drop_no_route": 0, "rx_drop_proto_unsupported": 0, "rx_drop_rpf_check": 0, "rx_drop_ttl_exceeded": 3, "rx_drops": 3, "rx_frag_error": 0, "rx_frag_ok": 0, "rx_frag_timeout": 0, "rx_frags": 0, "rx_pkts": 23609, "tx_bytes": 957372, "tx_drop_blocked": 0, "tx_drop_firewall": 0, "tx_drop_frag_needed": 0, "tx_drop_no_arp": 0, "tx_drops": 0, "tx_frag_error": 0, "tx_frag_ok": 0, "tx_pkts": 14312 }, "ttl": 1, "type": "lif", "urpf-mode": "STRICT_MODE" } or nsx-edge-1(path)> get current { "ifuid": 285, "ifuuid": "9eff9e4e-9157-4107-a0dd-c79350dce6f7", "lswitch": "d5af58f5-0616-46fd-af83-242d82983c65", "peer": "140ca8de-61e0-4bba-b429-6a3791b0846a", "stats": { "rx_bytes": 9150, "rx_drop_l2_loop": 0, "rx_drop_malformed": 0, "rx_drop_no_match": 0, "rx_drops": 0, "rx_pkts": 127, "tx_bytes": 2807, "tx_drop_no_mem": 0, "tx_drops": 0, "tx_pkts": 38 } }
    Mode
    Path
    Availability
    Edge, Public Cloud Gateway

    get data <uuid>
    Display the datum ID(s) and span(s) for the specified message ID.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get data c22a70f9-c592-49fb-9df7-33b161160354 id: c22a70f9-c592-49fb-9df7-33b161160354, type: vmware.nsx.nestdb.RuleSectionMsg span: 7c72c4ae-8fe8-4449-a4e2-c5e53ab0bb4f, 6ca7e1fc-1690-450f-aad3-a2f642fb70c5
    Mode
    Basic
    Availability
    Controller

    get data with receiver <uuid>
    Display datum ID(s) for the specified receiver.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get data with receiver 7c72c4ae-8fe8-4449-a4e2-c5e53ab0bb4f id: c22a70f9-c592-49fb-9df7-33b161160354, type: vmware.nsx.nestdb.RuleSectionMsg id: 7c72c4ae-8fe8-4449-a4e2-c5e53ab0bb4f, type: vmware.nsx.nestdb.TransportNodeConfigMsg id: 4e5d3a8c-5be8-4df6-9a0f-b0458715b036, type: vmware.nsx.nestdb.IpfixConfigurationMsg id: 73f0fe85-4b28-42d3-8b7c-94cec3879451, type: vmware.nsx.nestdb.RuleSectionMsg id: 00000000-0000-0000-0000-000000000001, type: vmware.nsx.nestdb.RuleMsg id: 00000000-0000-0000-0000-000000000002, type: vmware.nsx.nestdb.RuleMsg status: synced
    Mode
    Basic
    Availability
    Controller

    get dataplane
    Display Data Plane Development Kit (DPDK) configurations, which include fastpath cores, hugepage reserved, NUMA, physical port bindings, etc.
    Example
    nsx-edge-1> get dataplane Bfd_ring_size : 512 Corelist : 0 Ctrl_prio_on : True Fc_max_mem_percore : 394 Fc_mega_cache_size : 262144 Fc_mega_hard_timeout_ms: 423 Fc_mega_soft_timeout_ms: 353 Fc_micro_cache_size: 262144 Firewall_flow_cache_on: 1 Firewall_max_purge_rate: 5 Firewall_max_sessions: 8388608 Firewall_purge_timeout_ms: 10 Firewall_timer_resolution_ms: 50 Flow_cache_mega : True Flow_cache_micro : True Hugepage_mem : 1974 Intr_mode_on : True Ip_reass4_gc_period: 2 Ip_reass4_interfrag_ms: 1000 Ip_reass4_max_ms : 5000 Ip_reass4_maxq_len : 45 Ip_reass4_qhash_order: 8 Ip_reass4_qlist_order: 9 Lacp_ring_size : 512 Learning_ring_size : 512 Link_speed : 0 Mainloop_sleep_threshold: 10 Mainloop_wait_timeout_ms: 1 Mbuf_pool_size : 48128 N_mem_channel : 3 Numa_on : True Pkt_queue_limit : 0 Pkt_queue_rx_burst_size: 128 Pkt_seg_pnic_limit : 24 Prio_rx_queue_per_core: 8 Rss : c0=0:2:1 Rx_queue_per_core : 8 Rx_ring_size : 512 Slowpath_ring_size : 512 Stt_frag_queue_expire_ms: 3000 Stt_mbuf_queued_limit: 16000 Stt_reass_gc_period_ms: 3000 Tx_ring_size : 512 Devices: Device_id : 0x07b0 Name : fp-eth0 Numa_node : -1 Pci : 0000:0b:00.00 Vendor : 0x15ad Device_id : 0x07b0 Name : fp-eth1 Numa_node : -1 Pci : 0000:13:00.00 Vendor : 0x15ad Device_id : 0x07b0 Name : fp-eth2 Numa_node : -1 Pci : 0000:1b:00.00 Vendor : 0x15ad
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dataplane cpu stats
    Display data plane cpu statistics.
    Example
    nsx-edge-1> get dataplane cpu stats CPU Usage Core : 0 Crypto : 0 pps Kni : 0 pps Rx : 0 pps Slowpath : 0 pps Tx : 0 pps Usage : 0%
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dataplane flow-cache config
    Display the flow cache configurations.
    Example
    nsx-edge-1> get dataplane flow-cache config Enabled : true Mega_hard_timeout_ms: 4944 Mega_size : 262144 Mega_soft_timeout_ms: 4874 Micro_size : 262144
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dataplane flow-cache stats
    Display flow cache statistics for all fastpath cores.
    Example
    nsx-edge-1> get dataplane flow-cache stats Micro Core : 0 Active : 0/262144 Dont cache : 0 Hit rate : 0% Hits : 0 Insertions : 0 Misses : 1602651 Skipped : 1018653 Bucket collisions : 0 Key collisions : 0 Mega Core : 0 Active : 0/262144 Dont cache : 2693444 Hit rate : 0% Hits : 0 Insertions : 0 Misses : 1602651 Skipped : 1018653 Bucket collisions : 0 Key collisions : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dataplane flow-cache stats <lcore-list-all>
    Display the flow cache statistics for the specified fastpath cores.
    Option Description
    <lcore-list-all> Specify a list of lcore ids or "all"
    Allowed pattern: ^([0-9]+,)*([0-9]+)$|(all)$
    Example
    nsx-edge-1> get dataplane flow-cache stats 0 Micro Core : 0 Active : 0/262144 Dont cache : 0 Hit rate : 0% Hits : 0 Insertions : 0 Misses : 1602797 Skipped : 1018748 Bucket collisions : 0 Key collisions : 0 Mega Core : 0 Active : 0/262144 Dont cache : 2693695 Hit rate : 0% Hits : 0 Insertions : 0 Misses : 1602797 Skipped : 1018748 Bucket collisions : 0 Key collisions : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dataplane memory stats
    Display data plane memory statistics.
    Example
    nsx-edge-1> get dataplane memory stats Memory Usage Available_entries : 55712 Available_entries_in_cache : 39 Cache_size_per_core : 128 Name : mbuf_pool_socket_0 Per_core_cache Available_entries : 39 Core_id : 0 Size : 56704 Available_entries : 17407 Cache_size_per_core : 0 Name : sp_pktmbuf_pool Size : 17408
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dataplane perfstats <interval>
    Display data plane performance statistics.
    Option Description
    <interval> Specify sample interval
    Example
    nsx-edge-1> get dataplane perfstats 2 [ { "CpuStats": [ { "core": "0", "tx": "0 pps", "kni": "0 pps", "rx": "0 pps", "intercore": "0 pps", "usage": "0%", "slowpath": "0 pps" }, { "core": "1", "tx": "0 pps", "kni": "0 pps", "rx": "0 pps", "intercore": "0 pps", "usage": "0%", "slowpath": "0 pps" }, { "core": "2", "tx": "0 pps", "kni": "0 pps", "rx": "0 pps", "intercore": "0 pps", "usage": "0%", "slowpath": "0 pps" }, { "core": "3", "tx": "0 pps", "kni": "0 pps", "rx": "0 pps", "intercore": "0 pps", "usage": "0%", "slowpath": "0 pps" } ] }, { "PortStats": [ { "RxPkts": 5.0, "RxTput": 375.0, "TxThput": 309.0, "PortID": "fp-eth0", "TxPkts": 4.0 }, { "RxPkts": 0.0, "RxTput": 0.0, "TxThput": 0.0, "PortID": "fp-eth1", "TxPkts": 0.0 }, { "RxPkts": 0.0, "RxTput": 0.0, "TxThput": 0.0, "PortID": "fp-eth2", "TxPkts": 0.0 } ] }, { "FlowCacheStats": { "micro": [ { "core": "0", "hits": "0", "skipped": "1235795", "insertions": "0", "active": "0/262144", "misses": "0", "bucket collisions": "0", "dont cache": "0", "key collisions": "0", "hit rate": "n/a" }, { "core": "1", "hits": "0", "skipped": "19380", "insertions": "0", "active": "0/262144", "misses": "1104864", "bucket collisions": "0", "dont cache": "0", "key collisions": "0", "hit rate": "0%" }, { "core": "2", "hits": "0", "skipped": "9701", "insertions": "0", "active": "0/262144", "misses": "2754887", "bucket collisions": "0", "dont cache": "0", "key collisions": "0", "hit rate": "0%" }, { "core": "3", "hits": "0", "skipped": "8", "insertions": "0", "active": "0/262144", "misses": "904935", "bucket collisions": "0", "dont cache": "0", "key collisions": "0", "hit rate": "0%" } ], "mega": [ { "core": "0", "hits": "0", "skipped": "1235795", "insertions": "0", "active": "0/262144", "misses": "0", "bucket collisions": "0", "dont cache": "6567381", "key collisions": "0", "hit rate": "n/a" }, { "core": "1", "hits": "0", "skipped": "19380", "insertions": "0", "active": "0/262144", "misses": "1104864", "bucket collisions": "0", "dont cache": "2932004", "key collisions": "0", "hit rate": "0%" }, { "core": "2", "hits": "0", "skipped": "9701", "insertions": "0", "active": "0/262144", "misses": "2754887", "bucket collisions": "0", "dont cache": "3457790", "key collisions": "0", "hit rate": "0%" }, { "core": "3", "hits": "0", "skipped": "8", "insertions": "0", "active": "0/262144", "misses": "904935", "bucket collisions": "0", "dont cache": "2503080", "key collisions": "0", "hit rate": "0%" } ] } }, { "NUMAStats": "CPU model not supported" }, { "PerfStats": "CPU model not supported" } ]
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dataplane throughput <time>
    Calculate all nics throughput given an interval
    Option Description
    <time> Time measurement in seconds
    Allowed pattern: [1-9][0-9]*$
    Example
    nsx-edge-1> get physical-port throughput 1 { "fp-eth0": { "rx Gbps": 0, "rx K err/s": 0, "rx MB/s": 0, "rx k_err/s": 0, "rx k_miss/s": 0, "rx k_no_mbufs/s": 0, "rx kpps": 0, "tx Gbps": 0, "tx K drops/s": 0, "tx MB/s": 0, "tx kpps": 0 }, "fp-eth1": { "rx Gbps": 0, "rx K err/s": 0, "rx MB/s": 0, "rx k_err/s": 0, "rx k_miss/s": 0, "rx k_no_mbufs/s": 0, "rx kpps": 0, "tx Gbps": 0, "tx K drops/s": 0, "tx MB/s": 0, "tx kpps": 0 }, "fp-eth2": { "rx Gbps": 0, "rx K err/s": 0, "rx MB/s": 0, "rx k_err/s": 0, "rx k_miss/s": 0, "rx k_no_mbufs/s": 0, "rx kpps": 0, "tx Gbps": 0, "tx K drops/s": 0, "tx MB/s": 0, "tx kpps": 0 }, "fp-eth3": { "rx Gbps": 0, "rx K err/s": 0, "rx MB/s": 0, "rx k_err/s": 0, "rx k_miss/s": 0, "rx k_no_mbufs/s": 0, "rx kpps": 0, "tx Gbps": 0, "tx K drops/s": 0, "tx MB/s": 0, "tx kpps": 0 }, "fp-eth4": { "rx Gbps": 0, "rx K err/s": 0, "rx MB/s": 0, "rx k_err/s": 0, "rx k_miss/s": 0, "rx k_no_mbufs/s": 0, "rx kpps": 0, "tx Gbps": 0, "tx K drops/s": 0, "tx MB/s": 0, "tx kpps": 0 }, "fp-eth5": { "rx Gbps": 0, "rx K err/s": 0, "rx MB/s": 0, "rx k_err/s": 0, "rx k_miss/s": 0, "rx k_no_mbufs/s": 0, "rx kpps": 0, "tx Gbps": 0, "tx K drops/s": 0, "tx MB/s": 0, "tx kpps": 0 }, "fp-eth6": { "rx Gbps": 0, "rx K err/s": 0, "rx MB/s": 0, "rx k_err/s": 0, "rx k_miss/s": 0, "rx k_no_mbufs/s": 0, "rx kpps": 0, "tx Gbps": 0, "tx K drops/s": 0, "tx MB/s": 0, "tx kpps": 0 } }
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get debug bgp
    Show BGP debugging.
    Example
    nsx-edge-1(tier0_sr)> get debug bgp 2017-09-07 20:47:20.853: A BGP message has been received from a peer. 2017-09-07 20:47:20.853: A BGP message has been received from a peer. 2017-09-07 20:47:20.857: The destination address is the same as the next hop that would be 2017-09-07 20:47:20.857: DC-BGP Policy Manager filtered out a route.
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get dhcp ip-pool <uuid>
    Display a specific DHCP IP pool.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dhcp ip-pool 31b79159-c160-40ba-a9d7-be37186ac658 DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 ERROR_THRESHOLD: 100 ID: 31b79159-c160-40ba-a9d7-be37186ac658 OPTIONS: GENERIC_OPTIONS: CODE: 51 VALUES: 86400 CODE: 3 VALUES: 192.168.1.1 RANGE: END: IPV4: 192.168.1.200 START: IPV4: 192.168.1.100 WARNING_THRESHOLD: 80
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp ip-pools
    Display all DHCP IP pools.
    Example
    nsx-edge-1> get dhcp ip-pools DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 ERROR_THRESHOLD: 100 ID: 31b79159-c160-40ba-a9d7-be37186ac658 OPTIONS: GENERIC_OPTIONS: CODE: 51 VALUES: 86400 CODE: 3 VALUES: 192.168.1.1 RANGE: END: IPV4: 192.168.1.200 START: IPV4: 192.168.1.100 WARNING_THRESHOLD: 80
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp ip-pools server-uuid <uuid>
    Display DHCP IP pools which matched a specific server UUID.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dhcp ip-pools server-uuid efc4fc20-e00d-416d-819a-88eff8674602 DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 ERROR_THRESHOLD: 100 ID: 31b79159-c160-40ba-a9d7-be37186ac658 OPTIONS: GENERIC_OPTIONS: CODE: 51 VALUES: 86400 CODE: 3 VALUES: 192.168.1.1 RANGE: END: IPV4: 192.168.1.200 START: IPV4: 192.168.1.100 WARNING_THRESHOLD: 80
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp lease <string>
    Display a specific DHCP lease. You can specify a DHCP server's UUID, or a MAC address, or an IP address.
    Option Description
    <string> Generic string argument
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    Example
    nsx-edge-1> get dhcp lease efc4fc20-e00d-416d-819a-88eff8674602 DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 DHCP_SUBNET_MAC: efc4fc20-e00d-416d-819a-88eff8674602_192.168.1.100_00:0c:29:03:9c:b2 EXPIRE_TIME: 2016-10-11 23:48:07.136000 (timestamp: 1476229687136) IP: IPV4: 192.168.1.100 LEASE_TIME: 86400 MAC: MAC: 00:0c:29:03:9c:b2 START_TIME: 2016-10-10 23:48:07.136000 (timestamp: 1476143287136) SUBNET: 192.168.1.0 nsx-edge-1> get dhcp lease 00:0c:29:03:9c:b2 DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 DHCP_SUBNET_MAC: efc4fc20-e00d-416d-819a-88eff8674602_192.168.1.100_00:0c:29:03:9c:b2 EXPIRE_TIME: 2016-10-12 19:53:13.057000 (timestamp: 1476301993057) IP: IPV4: 192.168.1.100 LEASE_TIME: 86400 MAC: MAC: 00:0c:29:03:9c:b2 START_TIME: 2016-10-11 19:53:13.057000 (timestamp: 1476215593057) SUBNET: 192.168.1.0 nsx-edge-1> get dhcp lease 192.168.1.100 DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 DHCP_SUBNET_MAC: efc4fc20-e00d-416d-819a-88eff8674602_192.168.1.100_00:0c:29:03:9c:b2 EXPIRE_TIME: 2016-10-12 19:53:13.057000 (timestamp: 1476301993057) IP: IPV4: 192.168.1.100 LEASE_TIME: 86400 MAC: MAC: 00:0c:29:03:9c:b2 START_TIME: 2016-10-11 19:53:13.057000 (timestamp: 1476215593057) SUBNET: 192.168.1.0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp lease <string> all
    Display a specific DHCP lease. You can specify a DHCP server's UUID, or a MAC address, or an IP address.
    Option Description
    <string> Generic string argument
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    Example
    nsx-edge-1> get dhcp lease efc4fc20-e00d-416d-819a-88eff8674602 DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 DHCP_SUBNET_MAC: efc4fc20-e00d-416d-819a-88eff8674602_192.168.1.100_00:0c:29:03:9c:b2 EXPIRE_TIME: 2016-10-11 23:48:07.136000 (timestamp: 1476229687136) IP: IPV4: 192.168.1.100 LEASE_TIME: 0 MAC: MAC: 00:0c:29:03:9c:b2 START_TIME: 2016-10-10 23:48:07.136000 (timestamp: 1476143287136) SUBNET: 192.168.1.0 nsx-edge-1> get dhcp lease 00:0c:29:03:9c:b2 DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 DHCP_SUBNET_MAC: efc4fc20-e00d-416d-819a-88eff8674602_192.168.1.100_00:0c:29:03:9c:b2 EXPIRE_TIME: 2016-10-12 19:53:13.057000 (timestamp: 1476301993057) IP: IPV4: 192.168.1.100 LEASE_TIME: 86400 MAC: MAC: 00:0c:29:03:9c:b2 START_TIME: 2016-10-11 19:53:13.057000 (timestamp: 1476215593057) SUBNET: 192.168.1.0 nsx-edge-1> get dhcp lease 192.168.1.100 DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 DHCP_SUBNET_MAC: efc4fc20-e00d-416d-819a-88eff8674602_192.168.1.100_00:0c:29:03:9c:b2 EXPIRE_TIME: 2016-10-12 19:53:13.057000 (timestamp: 1476301993057) IP: IPV4: 192.168.1.100 LEASE_TIME: 86400 MAC: MAC: 00:0c:29:03:9c:b2 START_TIME: 2016-10-11 19:53:13.057000 (timestamp: 1476215593057) SUBNET: 192.168.1.0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp leases
    Display all non-released DHCP leases.
    Example
    nsx-edge-1> get dhcp leases DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 DHCP_SUBNET_MAC: efc4fc20-e00d-416d-819a-88eff8674602_192.168.1.100_00:0c:29:03:9c:b2 EXPIRE_TIME: 2016-10-11 23:48:07.136000 (timestamp: 1476229687136) IP: IPV4: 192.168.1.100 LEASE_TIME: 86400 MAC: MAC: 00:0c:29:03:9c:b2 START_TIME: 2016-10-10 23:48:07.136000 (timestamp: 1476143287136) SUBNET: 192.168.1.0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp leases all
    Display all DHCP leases.
    Example
    nsx-edge-1> get dhcp leases DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 DHCP_SUBNET_MAC: efc4fc20-e00d-416d-819a-88eff8674602_192.168.1.100_00:0c:29:03:9c:b2 EXPIRE_TIME: 2016-10-11 23:48:07.136000 (timestamp: 1476229687136) IP: IPV4: 192.168.1.100 LEASE_TIME: 0 MAC: MAC: 00:0c:29:03:9c:b2 START_TIME: 2016-10-10 23:48:07.136000 (timestamp: 1476143287136) SUBNET: 192.168.1.0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp server <uuid> [status | sync]
    Display a specific DHCP server. Optionally specify an argument to display only the status or the synchronization information.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dhcp server efc4fc20-e00d-416d-819a-88eff8674602 EDGE_CLUSTER_ID: 46944f73-89d0-40b8-86f2-6fd651ba4fb9 EDGE_NODE_ID: 0e10a15f-ca0d-47a7-92ff-9b0aa8d18b4d b084f07f-bd1f-4d91-bf48-775b896296d5 ID: efc4fc20-e00d-416d-819a-88eff8674602 OPTIONS: GENERIC_OPTIONS: CODE: 54 VALUES: 192.168.1.2 CODE: 1 VALUES: 255.255.255.0 SERVER_MAC: MAC: 00:50:56:98:7d:d7 SERVER_PREFIX: IPV4: 192.168.1.2 PREFIX_LENGTH: 24 nsx-edge-1> get dhcp server efc4fc20-e00d-416d-819a-88eff8674602 status DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 STATUS: READY nsx-edge-1> get dhcp server efc4fc20-e00d-416d-819a-88eff8674602 sync DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 LAST_ERROR_TIME: N/A LAST_SYNC_TIME: N/A STATUS: OK
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp servers [status | sync]
    Display all DHCP servers. Optionally specify an argument to display only the status or the synchronization information.

    If the edge node is the only member of the edge cluster, the STATUS property will be displayed as UNKNOWN when you call get dhcp servers status because HA (high availability) is not available.
    Example
    nsx-edge-1> get dhcp servers EDGE_CLUSTER_ID: 46944f73-89d0-40b8-86f2-6fd651ba4fb9 EDGE_NODE_ID: 0e10a15f-ca0d-47a7-92ff-9b0aa8d18b4d b084f07f-bd1f-4d91-bf48-775b896296d5 ID: efc4fc20-e00d-416d-819a-88eff8674602 OPTIONS: GENERIC_OPTIONS: CODE: 54 VALUES: 192.168.1.2 CODE: 1 VALUES: 255.255.255.0 SERVER_MAC: MAC: 00:50:56:98:7d:d7 SERVER_PREFIX: IPV4: 192.168.1.2 PREFIX_LENGTH: 24 nsx-edge-1> get dhcp servers status DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 STATUS: READY nsx-edge-1> get dhcp servers sync DHCP_ID: efc4fc20-e00d-416d-819a-88eff8674602 LAST_ERROR_TIME: N/A LAST_SYNC_TIME: N/A STATUS: OK
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp static-binding <uuid>
    Display a specific DHCP static binding.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dhcp static-binding 3773289c-32f6-4892-a94e-c74a47bf1e71 DHCP_ID: 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d ID: 3773289c-32f6-4892-a94e-c74a47bf1e71 MAC: MAC: 12:34:56:78:9a:bc OPTIONS: GENERIC_OPTIONS: CODE: 3 VALUES: 192.168.150.1 CODE: 12 VALUES: machine-1 CODE: 51 VALUES: 86400 PREFIX: IPV4: 192.168.150.201 PREFIX_LENGTH: 24
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp static-bindings
    Display all DHCP static bindings.
    Example
    nsx-edge-1> get dhcp static-bindings DHCP_ID: 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d ID: 3773289c-32f6-4892-a94e-c74a47bf1e71 MAC: MAC: 12:34:56:78:9a:bc OPTIONS: GENERIC_OPTIONS: CODE: 3 VALUES: 192.168.150.1 CODE: 12 VALUES: machine-1 CODE: 51 VALUES: 86400 PREFIX: IPV4: 192.168.150.201 PREFIX_LENGTH: 24
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dhcp static-bindings server-uuid <uuid>
    Display a specific DHCP static bindings which matched a specific server UUID.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dhcp static-bindings server-uuid 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d DHCP_ID: 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d ID: 3773289c-32f6-4892-a94e-c74a47bf1e71 MAC: MAC: 12:34:56:78:9a:bc OPTIONS: GENERIC_OPTIONS: CODE: 3 VALUES: 192.168.150.1 CODE: 12 VALUES: machine-1 CODE: 51 VALUES: 86400 PREFIX: IPV4: 192.168.150.201 PREFIX_LENGTH: 24
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get diagnosis config
    Get edge config diagnosis
    Example
    nsx-edge-1> get diagnosis config Passed: Manager, Controller, Nsxa-state, Nsxa-lrouter, Nsxa-service-router Failed: Nsxa-edge-cluster : no peers
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get diagnosis log
    Get diagnosis analysis
    Example
    nsx-edge-c0-1> get diagnosis log 2018-01-03T20:04:14.767Z host-326432070547636738750820273082671025578 NSX 6190 SYSTEM [nsx@6876 comp="nsx-edge" subcomp="lb-dispatcher.nestdb" level="INFO"] nsx-agent nestdb thread started 2018-01-03T20:04:14.767431Z host-326432070547636738750820273082671025578 NSX 5929 - [nsx@6876 comp="nsx-edge" subcomp="nestdb" tid="5929" level="INFO"] CreateVDb: main_vdb 2018-01-03T20:04:14.767467Z host-326432070547636738750820273082671025578 NSX 5929 - [nsx@6876 comp="nsx-edge" subcomp="nestdb" tid="5929" level="ERROR" errorCode="NST0601"] CreateVDb failed: Attempt to create main VDb *********************************************************************** ERROR:2018-01-03T20:04:14.767523Z host-326432070547636738750820273082671025578 NSX 5929 - [nsx@6876 comp="nsx-edge" subcomp="nsx-rpc" tid="5929" level="ERROR" errorCode="RPC102"] Server:UnaryCall[Service[nestdb::NestDbServer, vmware.nsx.nestdb.NestDb/CreateVDb, RMT_SIMPLE], 0x0000, LOCAL_ERROR] Is in error state (INVALID_ARGUMENT: Attempt to create main VDb, status is reported to the Client) *********************************************************************** 2018-01-03T20:04:14.767728Z host-326432070547636738750820273082671025578 NSX 6190 - [nsx@6876 comp="nsx-edge" subcomp="nsx-rpc" tid="6192" level="ERROR" errorCode="RPC102"] Client:UnaryCall[RpcMethod[vmware.nsx.nestdb.NestDb/CreateVDb, RMT_SIMPLE], 0x0000, REMOTE_ERROR] Is in error state (INVALID_ARGUMENT reported by Server) 2018-01-03T20:04:14.767741Z host-326432070547636738750820273082671025578 NSX 5929 - [nsx@6876 comp="nsx-edge" subcomp="nestdb" tid="5929" level="INFO"] GetVDbId: 2018-01-03T20:04:14.767Z host-326432070547636738750820273082671025578 NSX 6190 SYSTEM [nsx@6876 comp="nsx-edge" subcomp="lb-dispatcher.nestdb" level="WARN"] Failed to create vdb object. The vdb may already exist. RPC status 2: INVALID_ARGUMENT
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get diagnosis log limit <log-num>
    Get number of diagnosis entries
    Option Description
    <log-num> Specify number of log entries
    Allowed pattern: ^([0-9]+)$
    Example
    nsx-edge-c0-1> get diagnosis log limit 1 2018-01-03T20:04:16.548319+00:00 host-326432070547636738750820273082671025578 netcpa 6075 - - [DEBUG] Attempting to send data to client 11 2018-01-03T20:04:16.548798+00:00 host-326432070547636738750820273082671025578 netcpa 6075 - - [DEBUG] Sent Data to Client 11 2018-01-03T20:04:17.102262+00:00 host-326432070547636738750820273082671025578 NSX 5838 - [nsx@6876 comp="nsx-manager" subcomp="node-mgmt" username="root" level="INFO" audit="True"] 127.0.0.1 - - [2018-01-03 20:04:17] 'GET /api/v1/node/configuration' 200 1201 "" "curl/7.47.0" 0.144964 *********************************************************************** ERROR:2018-01-03T20:04:17.421993+00:00 host-326432070547636738750820273082671025578 NSX 5838 - [nsx@6876 comp="nsx-manager" subcomp="node-mgmt" username="root" level="ERROR" errorCode="NODE10"] Error setting system time, rc: 1, err: Failed to create bus connection: No such file or directory *********************************************************************** 2018-01-03T20:04:17.526811Z host-326432070547636738750820273082671025578 NSX 6075 - [nsx@6876 comp="nsx-controller" subcomp="netcpa" tid="71757700" level="verbose"] Checking global lock, current checked count: 1 2018-01-03T20:04:17.577539Z host-326432070547636738750820273082671025578 NSX 6075 - [nsx@6876 comp="nsx-controller" subcomp="netcpa" tid="71757700" level="verbose"] TCP connection started: 127.0.0.1:0::00000000-0000-0000-0000-000000000000:1234 2018-01-03T20:04:17.577589Z host-326432070547636738750820273082671025578 NSX 6075 - [nsx@6876 comp="nsx-controller" subcomp="netcpa" tid="71757700" level="warning"] socket async connect callback failed. Error code: Connection refused, system
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get diagnosis log limit <log-num> context <context-line-num>
    Get two number of diagnosis entries
    Option Description
    <log-num> Specify number of log entries
    Allowed pattern: ^([0-9]+)$
    <context-line-num> Specify the numbers of context logs before and after the error log
    Allowed pattern: ^([0-9]+)$
    Example
    nsx-edge-c0-1> get diagnosis log limit 1 context 1 2018-01-03T20:04:17.102262+00:00 host-326432070547636738750820273082671025578 NSX 5838 - [nsx@6876 comp="nsx-manager" subcomp="node-mgmt" username="root" level="INFO" audit="True"] 127.0.0.1 - - [2018-01-03 20:04:17] 'GET /api/v1/node/configuration' 200 1201 "" "curl/7.47.0" 0.144964 *********************************************************************** ERROR:2018-01-03T20:04:17.421993+00:00 host-326432070547636738750820273082671025578 NSX 5838 - [nsx@6876 comp="nsx-manager" subcomp="node-mgmt" username="root" level="ERROR" errorCode="NODE10"] Error setting system time, rc: 1, err: Failed to create bus connection: No such file or directory *********************************************************************** 2018-01-03T20:04:17.526811Z host-326432070547636738750820273082671025578 NSX 6075 - [nsx@6876 comp="nsx-controller" subcomp="netcpa" tid="71757700" level="verbose"] Checking global lock, current checked count: 1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarder <uuid> cache
    Display the DNS Forwarder Cache Entries.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dns-forwarder 9b032ded-a109-42ee-b49b-ae05e7b9edf6 cache CACHE: Cache size: 150 Cache insertions 0 Cache-Live-freed 0. Queries forwarded 0, Queries answered locally 0Host Address Flags Expires ERR_MSG: UUID: 9b032ded-a109-42ee-b49b-ae05e7b9edf6
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarder <uuid> config
    Display the DNS Forwarder Config.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dns-forwarder 7f304144-9df2-477f-ad36-89232200a6a7 config CACHE_SIZE: 1024 DEFAULT_ZONE: SOURCE_IP: IPV4: 11.11.11.11 UPSTREAM_SERVERS: IPV4: 10.117.0.1 ID: 7f304144-9df2-477f-ad36-89232200a6a7 LISTENER_IP: IPV4: 11.11.11.11 LOG_LEVEL: LB_LOG_LEVEL_INFO LOGICAL_ROUTER_ID: a5e4fb83-ed0a-45ef-9407-b73740ca9277 SR_CLUSTER_ID: 00002000-0000-0000-0000-000000000001
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarder <uuid> stats
    Display the DNS Forwarder Stats Entries.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dns-forwarder 9b032ded-a109-42ee-b49b-ae05e7b9edf6 stats STATS: CACHED_ENTRIES: 3 CONDITIONAL_FORWARDER_STATISTICS: DOMAIN_NAMES: vmc.example.com UPSTREAM_STATISTICS: QUERIES_FAILED: 0 QUERIES_SUCCEEDED: 2 UPSTREAM_SERVER: 3.3.5.10 DOMAIN_NAMES: 2.199.199.in-addr.arpa UPSTREAM_STATISTICS: QUERIES_FAILED: 0 QUERIES_SUCCEEDED: 0 UPSTREAM_SERVER: 3.3.5.20 CONFIGURED_CACHE_SIZE: 300 DEFAULT_FORWARDER_STATISTICS: DOMAIN_NAMES: UPSTREAM_STATISTICS: QUERIES_FAILED: 0 QUERIES_SUCCEEDED: 3 UPSTREAM_SERVER: 1.1.5.10 QUERIES_FAILED: 2 QUERIES_SUCCEEDED: 1 UPSTREAM_SERVER: 1.1.5.20 QUERIES_ANSWERED_LOCALLY: 1 QUERIES_FORWARDED: 5 RECEIVED_QUERIES_NUMBER: 6 TIME_STAMP: 2018-07-24 10:05:19.895000 (timestamp: 1532426719895) USED_CACHE_SIZE: 0 UUID: 9b032ded-a109-42ee-b49b-ae05e7b9edf6
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarder <uuid> status
    Display DNS Forwarder Status
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dns-forwarder 7f304144-9df2-477f-ad36-89232200a6a7 status ID : 7f304144-9df2-477f-ad36-89232200a6a7 STATUS : up ERR_MSG :
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarder <uuid> table
    Display the DNS Forwarder Entries.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get dns-forwarder 9b032ded-a109-42ee-b49b-ae05e7b9edf6 table ERR_MSG: TABLE: Domain-name Forwarder-Source-Address DNS-Server-Address Number-of-Queries Failed-Queries (null) 10.117.0.1 11.11.11.13 0 0 UUID: 9b032ded-a109-42ee-b49b-ae05e7b9edf6
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarder cache
    Display the DNS Forwarder Cache Entries Per SR.
    Example
    nsx-edge-1(tier0_sr)> get dns-forwarder cache CACHE: Cache size: 150 Cache insertions 0 Cache-Live-freed 0. Queries forwarded 0, Queries answered locally 0Host Address Flags Expires ERR_MSG: UUID: 9b032ded-a109-42ee-b49b-ae05e7b9edf6
    Mode
    Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarder stats
    Display the DNS Forwarder Stats Entries Per SR.
    Example
    nsx-edge-1(tier0_sr)> get dns-forwarder stats STATS: CACHED_ENTRIES: 3 CONDITIONAL_FORWARDER_STATISTICS: DOMAIN_NAMES: vmc.example.com UPSTREAM_STATISTICS: QUERIES_FAILED: 0 QUERIES_SUCCEEDED: 2 UPSTREAM_SERVER: 3.3.5.10 DOMAIN_NAMES: 2.199.199.in-addr.arpa UPSTREAM_STATISTICS: QUERIES_FAILED: 0 QUERIES_SUCCEEDED: 0 UPSTREAM_SERVER: 3.3.5.20 CONFIGURED_CACHE_SIZE: 300 DEFAULT_FORWARDER_STATISTICS: DOMAIN_NAMES: UPSTREAM_STATISTICS: QUERIES_FAILED: 0 QUERIES_SUCCEEDED: 3 UPSTREAM_SERVER: 1.1.5.10 QUERIES_FAILED: 2 QUERIES_SUCCEEDED: 1 UPSTREAM_SERVER: 1.1.5.20 QUERIES_ANSWERED_LOCALLY: 1 QUERIES_FORWARDED: 5 RECEIVED_QUERIES_NUMBER: 6 TIME_STAMP: 2018-07-24 10:05:19.895000 (timestamp: 1532426719895) USED_CACHE_SIZE: 0 UUID: 630ccdc4-4b8e-4d2e-9242-b27b689e0feb
    Mode
    Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarder status
    Display the DNS Forwarder Entries Per SR.
    Example
    nsx-edge-1(tier0_sr)> get dns-forwarder status ERR_MSG: STATUS: up UUID: 14590164-e8fc-4949-bad7-fe6909fb1099
    Mode
    Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarder table
    Display the DNS Forwarder Entries Per SR.
    Example
    nsx-edge-1(tier0_sr)> get dns-forwarder table ERR_MSG: TABLE: Domain-name Forwarder-Source-Address DNS-Server-Address Number-of-Queries Failed-Queries (null) 10.117.0.1 11.11.11.13 0 0 UUID: 9b032ded-a109-42ee-b49b-ae05e7b9edf6
    Mode
    Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarders config
    Display the DNS Forwarders Config.
    Example
    nsx-edge-1> get dns-forwarders config CACHE_SIZE: 1024 DEFAULT_ZONE: SOURCE_IP: IPV4: 11.11.11.11 UPSTREAM_SERVERS: IPV4: 10.117.0.1 ID: 7f304144-9df2-477f-ad36-89232200a6a7 LISTENER_IP: IPV4: 11.11.11.11 LOG_LEVEL: LB_LOG_LEVEL_INFO LOGICAL_ROUTER_ID: a5e4fb83-ed0a-45ef-9407-b73740ca9277 SR_CLUSTER_ID: 00002000-0000-0000-0000-000000000001
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get dns-forwarders status
    Display DNS Forwarder Status
    Example
    nsx-edge-1> get dns-forwarders status ERR_MSG: STATUS: up UUID: 14590164-e8fc-4949-bad7-fe6909fb1099 ERR_MSG: STATUS: up UUID: 9b032ded-a109-42ee-b49b-ae05e7b9edf6
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get domain-object <uuid>
    Display information about the specified domain object.
    Option Description
    <uuid> Domain object identifier
    Example
    nsx-controller-1> get domain-object 348e20a9-8b6e-4209-81df-779bff97781d id: 348e20a9-8b6e-4209-81df-779bff97781d type: RuleSection content: com.vmware.nsx.ccp.domain.entity.RuleSection@1642d5b0[message=priority: 2305843009213693951 name: "Default Layer2 Section" version: "0" ,id=348e20a9-8b6e-4209-81df-779bff97781d,resolver=com.vmware.nsx.falcon.FalconImpl@6306e14c]
    Mode
    Basic
    Availability
    Controller

    get domain-objects <domain_object_type>
    Display domain objects of the specified type.
    Option Description
    <domain_object_type> Domain object type
    Allowed values: ArpTableConfig, Container, ContextProfile, Cif, DhcpIpPool, DhcpStaticBinding, EdgeNode, Hypervisor, EdgeClusterConfig, SiRedirectionPolicy, IpfixCollectorConfiguration, IpfixDfwConfiguration, LogicalDhcpServer, LogicalMDProxyServer, LogicalSwitch, LogicalSwitchPort, LogicalRouter, LogicalRouterPort, MacAddress, PublicCloudGatewayNode, Rule, RuleSection, Vif, ServicePath, ServiceChain, ServiceVM, ServiceVmStatus, EwSiRedirectionPolicy, NsSiRedirectionPolicy, ServiceProfile, SiService
    Example
    nsx-controller-1> get domain-objects RuleSection id: 348e20a9-8b6e-4209-81df-779bff97781d, type: RuleSection id: a9ccd570-9b6f-42e9-a372-162c4b00238e, type: RuleSection id: 00003200-0000-0000-0000-000000000001, type: RuleSection id: 00003200-0000-0000-0000-000000000002, type: RuleSection
    Mode
    Basic
    Availability
    Controller

    get domain-objects <objects_type_with_component_name> <component-name>
    Display domain objects of the specified type with the specified component name
    Option Description
    <objects_type_with_component_name> Object type with component name
    Allowed values: rule, rulesection
    <component-name> Component name
    Allowed values: dfw
    Example
    nsx-controller-1> get domain-objects rule dfw id: 00000000-0000-0000-0000-000000000401, type: Rule, rule config message id: 1025, section: 17df3754-73df-4809-8820-fe01ee57d02a id: 00000000-0000-0000-0000-000000000402, type: Rule, rule config message id: 1026, section: ba6ae44f-4ea2-4167-a298-75849a458273
    Mode
    Basic
    Availability
    Controller

    get edge-cluster history state
    Display the Edge cluster state history.
    Example
    nsx-edge-1> get edge-cluster history state State : Disabled Time : 2016-09-12 18:07:03.20 Event : Init Reason : Init State : Offline Time : 2016-09-20 10:19:24.22 Event : Config Updated Reason : Config State : Discover Time : 2016-09-20 10:19:24.22 Event : Config Updated Reason : Config State : StateSync Time : 2016-09-20 10:19:25.19 Event : BFD State Updated Reason : Updated State : Inactive Time : 2016-09-20 10:19:30.50 Event : State Sync Completed Reason : Updated State : Active Time : 2016-09-20 10:19:30.50 Event : State Sync Completed Reason : Updated State : Inactive Time : 2016-10-10 13:53:30.88 Event : Node State Changed Reason : Tunnels Down
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get edge-cluster status
    Display the Edge cluster status.
    Example
    nsx-edge-1> get edge-cluster status High Availability State : Inactive Since : 2016-10-10 13:53:30.88 Edge Node Id : f9933e11-96a5-48fa-9f64-9c3b789d530c Edge Node Status : Down Admin State : Up Vtep State : Up Configuration : applied Health Check Config : Interval : 1000 msec Deadtime : 3000 msec Max Hops : 255 Service Status : Datapath Config Channel : Up Datapath Status Channel : Up Routing Status Channel : Up Routing Status : Down Peer Status : Node Id : 14693d4d-de8b-417e-a53c-315702fc72c5 Node Status : Admin Down Healthcheck Sessions : Interface : eth0 Session : 192.168.110.111:192.168.110.112 Status : Admin Down Interface : nsx-edge-vtep Device : fp-eth0 Session : 192.168.150.201:192.168.150.202 Status : Unreachable
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get eula
    Show the content of End User License Agreement
    Mode
    Basic
    Availability
    Manager

    get file <filename>
    Display information about the specified file in the filestore.
    Option Description
    <filename> Existing file argument
    Example
    nsx> get file support-bundle-0.tgz Directory of filestore:/ -rw- 24932275 Feb 05 2016 05:58:46 UTC support-bundle-0.tgz
    Mode
    Basic
    Availability
    Controller, Edge, NSX Cloud VM, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get file <filename> thumbprint
    Display the file thumbprint.
    Option Description
    <filename> Existing file argument
    Example
    nsx> get file support-bundle-0.tgz thumbprint SHA1SUM: d0fc5c741bdc0be8eacce3e8f581b74c32bc4d62 SHA256SUM: 13cfaccbfc44193eaee3a729b6c4a810b276df6d8086fc82ed1720d23906473d
    Mode
    Basic
    Availability
    Controller, Edge, NSX Cloud VM, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get files
    Display information about the files in the filestore.
    Example
    nsx> get files Directory of filestore:/ -rw- 24950960 Feb 05 2016 05:59:23 UTC support-bundle-1.tgz -rw- 24932275 Feb 05 2016 05:58:46 UTC support-bundle-0.tgz
    Mode
    Basic
    Availability
    Controller, Edge, NSX Cloud VM, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get filesystem-stats
    Display the file system information.
    Example
    nsx-manager-1> get filesystem-stats Filesystem Size Used Avail Use% Mounted on udev 7.9G 4.0K 7.9G 1% /dev tmpfs 1.6G 768K 1.6G 1% /run /dev/sda2 19G 2.2G 16G 13% / none 4.0K 0 4.0K 0% /sys/fs/cgroup none 5.0M 0 5.0M 0% /run/lock none 7.9G 4.0K 7.9G 1% /run/shm none 100M 0 100M 0% /run/user /dev/mapper/nsx-repository 19G 302M 18G 2% /repository /dev/mapper/nsx-tmp 3.7G 8.0M 3.5G 1% /tmp /dev/sda1 945M 6.0M 874M 1% /boot /dev/mapper/nsx-config 19G 44M 18G 1% /config /dev/mapper/nsx-config__bak 19G 44M 18G 1% /config_bak /dev/mapper/nsx-image 19G 44M 18G 1% /image /dev/sda3 19G 44M 18G 1% /os_bak /dev/mapper/nsx-var+log 9.3G 623M 8.2G 7% /var/log
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get firewall <uuid> addrset name <string>
    Display the specified firewall address set for the logical router interface.
    Option Description
    <uuid> Firewall logical interface UUID argument
    <string> Generic string argument
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e addrset name srcep Addrset count: 1 Name : srcep Address(es) : 11.1.1.1,11.1.2.1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> addrset sets
    Display all the firewall address sets for the logical router interface.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e addrset sets Addrset count: 2 Name : dstep Address(es) : 11.1.1.1,11.1.2.1 Name : srcep Address(es) : 10.1.1.1,10.1.1.10
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> connection
    Display the firewall connections on the specified logical router interface.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e connection Connection count: 1 0x00001c0c08000007: 192.168.130.254:57336 -> 172.16.10.11:80 (80.80.80.11:80) in protocol tcp state ESTABLISHED:ESTABLISHED
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> connection count
    Display the firewall connection count.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e connection count Connection count: 1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> connection state
    Display the state of the firewall connections.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e connection state Connection count: 1 192.168.130.254:57101 -> 172.16.10.11:80 (80.80.80.11:80) in protocol tcp state ESTABLISHED:ESTABLISHED f-0 n-421
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> ike policy [<rule-id>]
    Display IKE policy for the specified logical router interface.
    Option Description
    <uuid> Firewall logical interface UUID argument
    <rule-id> Rule ID
    Allowed pattern: ^[1-9][0-9]*$
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e ike policy 2052 Policy count: 1 Rule ID : 2052 Policy : in protocol any from ip 2.2.2.0/24 to ip 1.1.1.0/24 encrypt keypolicy 00000000-0000-0000-0b00-000000000000
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> interface stats
    Display firewall interface statistics for the specified logical router interface.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e interface stats Failed IP option : 0 Failed NAT translation : 0 Failed SYN proxy : 0 Failed Spoofguard : 0 Failed bad offset : 0 Failed bad timestamp : 0 Failed checksum : 0 Failed congestion : 0 Failed expected state : 0 Failed fragment : 0 Failed memory allocation : 0 Failed normalization : 0 Failed short header : 0 Failed source limit : 0 Failed state insertion : 0 Failed state limit : 0 Firewall deletions : 13 Firewall insertions : 15 Firewall lookups : 0 Found match : 67 Input bytes allowed : 5741 Input bytes dropped : 0 Input packets allowed : 61 Input packets dropped : 0 Number of state collisions : 0 Number of states : 2 Output bytes allowed : 12628 Output bytes dropped : 0 Output packets allowed : 138 Output packets dropped : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> ruleset [type <rule-type>] rules [<ruleset-detail>]
    Display firewall rules with expanded address sets for the specified logical router interface.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e ruleset rules DNAT rule count: 1 Rule ID : 2053 Rule : in protocol any from any to ip 80.80.80.11 dnat ip 172.16.10.11 SNAT rule count: 1 Rule ID : 2052 Rule : out protocol any from ip 172.16.10.11 to any snat ip 80.80.80.11
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> ruleset [type <rule-type>] stats
    Display firewall rule statistics for the specified logical router interface.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e ruleset stats DNAT rule count: 1 Rule ID : 2053 Input bytes : 1367 Output bytes : 2374 Input packets : 24 Output packets : 19 Evaluations : 8 Active connections : 1 SNAT rule count: 1 Rule ID : 2052 Input bytes : 4478 Output bytes : 6106 Input packets : 39 Output packets : 68 Evaluations : 7 Active connections : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> sync config
    Display the active/standby configuration for the firewall on the specified logical router interface.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e sync config HA mode : primary-active Firewall enabled : true Sync pending : false Bulk sync pending : false Last status: ok Local VTEP IP : 192.168.250.62 Peer VTEP IP : 192.168.250.63 Local context : 56eead22-3bb9-4586-8de3-9412941f9116 Peer context : 56eead22-3bb9-4586-8de3-9412941f9116
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> sync stats
    Display the firewall synchronization statistics.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e sync stats bad-action : 0 bad-c-delete : 0 bad-c-update : 0 bad-delete : 0 bad-header : 0 bad-len : 0 bad-request : 0 bad-rule-id : 0 bad-stale-c-update : 0 bad-stale-update : 0 bad-state-c-update : 0 bad-state-insert : 0 bad-state-update : 0 bad-total : 0 bad-ttl : 0 bad-update : 0 bad-val : 0 bad-version : 0 failed-module-insert : 0 failed-no-mem : 0 failed-no-module : 0 failed-output : 0 input-ipv4 : 5 output-ipv4 : 138 send-bulk-update : 0 send-c-delete : 13 send-c-update : 135 send-update : 0 state-c-delete : 0 state-c-update : 0 state-delete : 0 state-insert : 0 state-request : 2 state-update : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <uuid> timeouts
    Display the fixed timeouts for connection events.
    Option Description
    <uuid> Firewall logical interface UUID argument
    Example
    nsx-edge-1> get firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e timeouts Timeout count: 12 dfw.icmp.error_reply : 10 dfw.icmp.first_packet : 20 dfw.ip.frag : 30 dfw.tcp.closed : 5 dfw.tcp.closing : 900 dfw.tcp.established : 7200 dfw.tcp.fin_wait : 7 dfw.tcp.first_packet : 120 dfw.tcp.opening : 30 dfw.udp.first_packet : 60 dfw.udp.multiple : 60 dfw.udp.single : 30
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall <vifuuid> addrsets
    Display firewall address sets
    Option Description
    <vifuuid> UUID argument
    Example
    > get firewall e0b4c45b-7df8-40d5-a229-2b2a5be2d4d0 addrset Firewall Address Sets --------------------------------------------------
    Mode
    Basic
    Availability
    ESXi, KVM

    get firewall <vifuuid> fqdn
    Display firewall fqdn attribute of profiles.
    Option Description
    <vifuuid> UUID argument
    Example
    > get firewall 89e14dfc-98a8-47bc-adb1-ed26091123ee fqdn Firewall Profile FQDN ---------------------------------------------------------------------- Profiles count : 1 Profile UUID : 941e03a3-1da9-43ba-963e-9e6e467e9ce0 FQDN count : 2 FQDN UUID : 2b90ce0d-f1d2-4092-adb8-1e61b5c05ca8 Value : .*\.office\.com IP set : 192.168.11.1, 2001::192:168:11:1 FQDN UUID : 15d3bd4f-3e23-41ef-955f-5d2c3df49c3c Value : .*\.outlook\.com IP set : 192.168.22.1, 2001::192:168:22:1
    Mode
    Basic
    Availability
    KVM

    get firewall <vifuuid> profile
    Display firewall attribute profiles.
    Option Description
    <vifuuid> UUID argument
    Example
    > get firewall e0b4c45b-7df8-40d5-a229-2b2a5be2d4d0 profiles Firewall Profiles -------------------------------------------------- Profiles count : 1 UUID : 35ab482b-1c37-4168-a7d4-176a0c91788e Attribute count : 2 APP_ID : APP_NTP APP_ID : APP_SVN
    Mode
    Basic
    Availability
    ESXi, KVM

    get firewall <vifuuid> ruleset rules
    Display firewall rules
    Option Description
    <vifuuid> UUID argument
    Example
    > get firewall e0b4c45b-7df8-40d5-a229-2b2a5be2d4d0 ruleset rules Firewall Rules -------------------------------------------------- VIF UUID : e0b4c45b-7df8-40d5-a229-2b2a5be2d4d0 Ruleset UUID : 3d04fa69-5faa-4127-b55f-c08c5de5a134 Rule count : 4 rule 1031 inout protocol any from any to any accept; rule 1032 inout protocol any from any to any accept; rule 1033 inout protocol any from any to any accept; rule 1034 inout protocol any from any to any accept;
    Mode
    Basic
    Availability
    ESXi, KVM

    get firewall [logical-switch <uuid>] interfaces
    Display the logical router or switch interfaces which have firewall rules.
    Example
    nsx-edge-1> get firewall interfaces Interface : e159f0db-d8e4-4973-9cbb-8cc30def2c3e Type : UPLINK Sync enabled : true Name : lrp265 VRF ID : 22 Context entity : 627171f9-ba99-4d81-971e-54ec857b9693 Context name : SR-Tier0-LR-1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall addrset name <uuid>
    Display firewall addresses for the specified address set.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    host-1> get firewall addrset name 986cf106-b987-48bb-bdaa-8b55e1e82756 Address Count: 2 Address : ip 14.14.14.14 Address : ip 12.12.12.12
    Mode
    Basic
    Availability
    NSX Cloud VM

    get firewall addrset sets
    Display firewall address sets for the available virtual interface.
    Example
    host-1> get firewall addrset sets VIF ID : eni-d36ce980 Addrset Count : 1 Addrset UUID : 986cf106-b987-48bb-bdaa-8b55e1e82756 Address Count : 2 Address : 14.14.14.14 Address : 12.12.12.12
    Mode
    Basic
    Availability
    NSX Cloud VM

    get firewall connection state
    Display the state of the firewall connections in the VRF context.
    Example
    nsx-edge-1(vrf)> get firewall connection state Connection count: 1 192.168.130.254:57101 -> 172.16.10.11:80 (80.80.80.11:80) in protocol tcp state ESTABLISHED:ESTABLISHED f-0 n-421
    Mode
    VRF, Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get firewall exclude
    Display firewall exclude interfaces.
    Example
    host-1> get firewall exclude VIF count: 1 VIF ID : eni-d36ce980
    Mode
    Basic
    Availability
    NSX Cloud VM

    get firewall exclude-list
    Display the firewall exclusion list.
    Example
    nsx-manager-1> get firewall exclude-list target_id target_type target_display_name ---------- ------------ -------------------- 954dd9f7-0280-4aff-aebd-8323fd00d770 LogicalSwitch ls01 3b30045a-9166-43b6-85a0-a07d23af5e01 LogicalPort lport02
    Mode
    Basic
    Availability
    Manager

    get firewall exclusion
    Display firewall exclusions.
    Example
    esx-1> get firewall exclusion Firewall Exclusion ---------------------------------------------------------------------- None
    Mode
    Basic
    Availability
    ESXi, KVM

    get firewall interface stats
    Display firewall interface statistics for the specified logical router interface in the VRF context.
    Example
    nsx-edge-1(vrf)> get firewall interface stats Failed IP option : 0 Failed NAT translation : 0 Failed SYN proxy : 0 Failed Spoofguard : 0 Failed bad offset : 0 Failed bad timestamp : 0 Failed checksum : 0 Failed congestion : 0 Failed expected state : 0 Failed fragment : 0 Failed memory allocation : 0 Failed normalization : 0 Failed short header : 0 Failed source limit : 0 Failed state insertion : 0 Failed state limit : 0 Firewall deletions : 13 Firewall insertions : 15 Firewall lookups : 0 Found match : 67 Input bytes allowed : 5741 Input bytes dropped : 0 Input packets allowed : 61 Input packets dropped : 0 Number of state collisions : 0 Number of states : 2 Output bytes allowed : 12628 Output bytes dropped : 0 Output packets allowed : 138 Output packets dropped : 0
    Mode
    VRF, Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get firewall interfaces
    Display the logical router or switch interfaces which have firewall rules.
    Example
    nsx-edge-1(vrf)> get firewall interfaces Interface : e159f0db-d8e4-4973-9cbb-8cc30def2c3e Type : UPLINK Sync enabled : true Name : lrp265 VRF ID : 22 Context entity : 627171f9-ba99-4d81-971e-54ec857b9693 Context name : SR-Tier0-LR-1
    Mode
    VRF, Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get firewall interfaces sync
    Display sync configuration for logical router interfaces with firewall rules.
    Example
    nsx-edge-1> get firewall interfaces sync Total count: 1 Interface : e159f0db-d8e4-4973-9cbb-8cc30def2c3e HA mode : primary-active Firewall enabled : true Sync pending : false Bulk sync pending : false Last status: ok Local VTEP IP : 192.168.250.62 Peer VTEP IP : 192.168.250.63 Local context : 56eead22-3bb9-4586-8de3-9412941f9116 Peer context : 56eead22-3bb9-4586-8de3-9412941f9116
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get firewall ipfix-containers
    Display firewall ipfix containers.
    Example
    esx-1> get firewall ipfix-containers Firewall IPFIX Containers ---------------------------------------------------------------------- Container UUID VIF UUID daa4a875-9050... 1b78faa3-d8b9... 879e25c1-cf28... 14417daf-ce52... a0286cfe-73d2... 36124bcf-5bdf... 14417daf-ce52... e30a0072-1930... e5e6fee8-61f7...
    Mode
    Basic
    Availability
    ESXi, KVM, NSX Cloud VM

    get firewall ipfix-filters
    Display firewall ipfix filters.
    Example
    esx-1> get firewall ipfix-filters Firewall IPFIX VIFs ---------------------------------------------------------------------- e0b4c45b-7df8-40d5-a229-2b2a5be2d4d0 e30a0072-1930-48a0-adaa-9412e758eea7
    Mode
    Basic
    Availability
    ESXi, KVM, NSX Cloud VM

    get firewall ipfix-profiles
    Display firewall ipfix profile configration.
    Example
    esx-1> get firewall ipfix-profiles Firewall IPFIX Profiles ---------------------------------------------------------------------- UUID Priority Timeout Domain ID AppliedTo Count Collector UUID 0a988e9e-725d... 10 5 100 8 035cad05-0dc8... 6f25a736-646e... 0 3 1 2 188da901-1bd0...
    Mode
    Basic
    Availability
    ESXi, KVM, NSX Cloud VM

    get firewall ipfix-stats
    Display firewall ipfix statistics.
    Example
    esx-1> get firewall ipfix-stats Firewall IPFIX Statistics ---------------------------------------------------------------------- Collector config: 188da901-1bd0-402b-9b57-3521cb59910b IP address port # bytes sent sequence # sent errors 10.2.117.211 2828 38016 355 0 Collector config: 035cad05-0dc8-44a8-b320-d6ebb8112515 IP address port # bytes sent sequence # sent errors 2.2.2.2 200 344 0 0 1.1.1.1 100 344 0 0
    Mode
    Basic
    Availability
    ESXi, KVM, NSX Cloud VM

    get firewall orphaned-section
    Get orphaned sections from the firewall.
    Mode
    Basic
    Availability
    Manager

    get firewall packetlog
    Display the contents of the DFW packet log file.
    Example
    2018-07-17T18:41:20.708Z f1007e48 INET match PASS 2 OUT 84 ICMP 1.1.1.10->1.1.3.10 2018-07-17T18:41:20.716Z a8de7313 INET match PASS 2 IN 84 ICMP 1.1.1.10->1.1.3.10 . . .
    Mode
    Basic
    Availability
    ESXi, KVM

    get firewall packetlog last <lines>
    Display last lines of the DFW packet log file.
    Option Description
    <lines> Line count, up to 80
    Example
    . . . 2018-07-17T18:41:20.708Z f1007e48 INET match PASS 2 OUT 84 ICMP 1.1.1.10->1.1.3.10 2018-07-17T18:41:20.716Z a8de7313 INET match PASS 2 IN 84 ICMP 1.1.1.10->1.1.3.10
    Mode
    Basic
    Availability
    ESXi, KVM

    get firewall published-entity
    Get list of published entities from the firewall.
    Example
    nsx-manager-1> get firewall published-entity entity_id entity_type sync_operation_type firewall_type priority last_modified_time entity_revision ------------------------------------ ------------ ------------------- ------------- ------------------- ------------------ --------------- 1a91e6de-cf01-4610-a1a0-535e51500c6d RULE_SECTION FULLSYNC DFW 2089670227099910143 1537220678865 0 166abe33-8ea6-4cf0-a264-a6a2496fffca RULE_SECTION FULLSYNC DFW 2089670227099910143 1537220678841 0
    Mode
    Basic
    Availability
    Manager

    get firewall published-entity <published-entity-type> <published-entity-id>
    Get a published entity of given type and id.
    Option Description
    <published-entity-type> Firewall entity type
    Allowed values: section
    <published-entity-id> Firewall entity id
    Example
    nsx-manager-1> get firewall published-entity section 1a91e6de-cf01-4610-a1a0-535e51500c6d entity_id entity_type sync_operation_type firewall_type priority last_modified_time entity_revision ------------------------------------ ------------ ------------------- ------------- ------------------- ------------------ --------------- 1a91e6de-cf01-4610-a1a0-535e51500c6d RULE_SECTION FULLSYNC DFW 2089670227099910143 1537220678865 0
    Mode
    Basic
    Availability
    Manager

    get firewall rule-stats
    Display firewall rule statistics.
    Example
    sc-rdops-vm09-dhcp-1-10.eng.vmware.com> get firewall rule-stats total Firewall Rule Statistics ------------------------------------------------------------------------------------------ RuleId Packets Bytes Sessions hits 1 0 0 0 0 2 511 33276 0 511
    Mode
    Basic
    Availability
    ESXi, KVM, NSX Cloud VM

    get firewall rule-stats total
    Display total firewall rule statistics.
    Example
    sc-rdops-vm09-dhcp-1-10.eng.vmware.com> get firewall rule-stats total Firewall Rule Statistics ------------------------------------------------------------------------------------------ RuleId Packets Bytes Sessions hits 1 0 0 0 0 2 511 33276 0 511
    Mode
    Basic
    Availability
    ESXi, KVM, NSX Cloud VM

    get firewall rules
    Display the summary of firewall rules.
    Example
    host-1> get firewall rules VIF ID : eni-d36ce980 Rule Count : 2 Ruleset UUID : e83c8855-2541-4965-90dd-522435853409 Rule ID : 1025 Rule : inout protocol any from any to addrset 986cf106-b987-48bb-bdaa-8b55e1e82756 accept Rule ID : 2 Rule : inout protocol any from any to any accept Rule UUID : 8f03714c-4d60-48d2-9767-7654d90c079e Rule ID : 1 Rule : inout ethertype any stateless from any to any accept
    Mode
    Basic
    Availability
    NSX Cloud VM

    get firewall status
    Display the firewall status.
    Example
    esx-1> get firewall status Firewall Status ---------------------------------------------------------------------- enabled
    Mode
    Basic
    Availability
    ESXi, KVM

    get firewall status
    Display the firewall status.
    Example
    nsx-manager-1> get firewall status context global_status _revision ------- ------------- --------- logical_routers ENABLED 0 transport_nodes ENABLED 0
    Mode
    Basic
    Availability
    Manager

    get firewall summary
    Display the firewall summary.
    Example
    nsx-manager-1> get firewall summary section_type section_count rule_count ------------ ------------- ---------- L2DFW 1 1 L3DFW 1 1
    Mode
    Basic
    Availability
    Manager

    get firewall sync stats
    Display the firewall synchronization statistics in the VRF context.
    Example
    nsx-edge-1(vrf)> get firewall sync stats bad-action : 0 bad-c-delete : 0 bad-c-update : 0 bad-delete : 0 bad-header : 0 bad-len : 0 bad-request : 0 bad-rule-id : 0 bad-stale-c-update : 0 bad-stale-update : 0 bad-state-c-update : 0 bad-state-insert : 0 bad-state-update : 0 bad-total : 0 bad-ttl : 0 bad-update : 0 bad-val : 0 bad-version : 0 failed-module-insert : 0 failed-no-mem : 0 failed-no-module : 0 failed-output : 0 input-ipv4 : 5 output-ipv4 : 138 send-bulk-update : 0 send-c-delete : 13 send-c-update : 135 send-update : 0 state-c-delete : 0 state-c-update : 0 state-delete : 0 state-insert : 0 state-request : 2 state-update : 0
    Mode
    VRF, Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get firewall thresholds
    Display firewall thresholds.
    Example
    esx> get firewall thresholds Firewall Threshold Monitors ------------------------------------------------------------------------------------------- # Name Raised Threshold CurrValue CurrSize MaxSize PeakEver EverTime(ago) 1 dfw-cpu False 90 0 -- -- 0 --:--:-- 2 vsip-attr False 90 2 2 MB 96 MB 2 05:42:08 3 vsip-flow False 90 0 0 MB 168 MB 0 --:--:-- 4 vsip-fqdn False 90 0 0 MB 96 MB 0 --:--:-- 5 vsip-module False 90 4 22 MB 512 MB 4 05:42:08 6 vsip-rules False 90 0 0 MB 128 MB 0 --:--:-- 7 vsip-state False 90 0 0 MB 192 MB 0 --:--:--
    Mode
    Basic
    Availability
    ESXi

    get firewall vifs
    Display firewall VIFs
    Example
    > get firewall vifs Firewall VIFs -------------------------------------------------- VIF count: 2 1. e0b4c45b-7df8-40d5-a229-2b2a5be2d4d0 2. e30a0072-1930-48a0-adaa-9412e758eea7
    Mode
    Basic
    Availability
    ESXi, KVM

    get forwarding
    Display forwarding information for the current interface. If the interface is a switch port, the MAC address table is displayed. If the interface is a router interface, the IP forwarding table is displayed.
    Example
    nsx-edge-1(path)> get forwarding IP Neighbor Table: IP UUID MAC State Last Update Time IP Forwarding Table: IP Prefix Type UUID Gateway IP Gateway MAC 0.0.0.0/0 route 2a7bf881-1f89-4833-833e-47673b79901a 169.0.0.2 80.80.80.11/32 route 3eb2d5aa-3d11-4de3-98df-3cdebf5094e0 100.64.1.3 100.64.1.0/32 route 01f737d3-a66a-5b14-9ff7-6fc64af6a613 100.64.1.0/31 route bbf5b23c-3f0a-4afe-b3b3-b19814d4dd2a 100.64.1.2/32 route 01f737d3-a66a-5b14-9ff7-6fc64af6a613 100.64.1.2/31 route 3eb2d5aa-3d11-4de3-98df-3cdebf5094e0 169.0.0.0/28 route 2a7bf881-1f89-4833-833e-47673b79901a 169.0.0.1/32 route 01f737d3-a66a-5b14-9ff7-6fc64af6a613 172.16.10.0/24 route bbf5b23c-3f0a-4afe-b3b3-b19814d4dd2a 100.64.1.1 172.16.20.0/24 route bbf5b23c-3f0a-4afe-b3b3-b19814d4dd2a 100.64.1.1 172.16.30.0/24 route bbf5b23c-3f0a-4afe-b3b3-b19814d4dd2a 100.64.1.1 172.16.40.0/24 route 3eb2d5aa-3d11-4de3-98df-3cdebf5094e0 100.64.1.3 192.168.130.0/24 route 2a7bf881-1f89-4833-833e-47673b79901a 169.0.0.2 192.168.130.3/32 route 2a7bf881-1f89-4833-833e-47673b79901a 169.0.0.2 or nsx-edge-1(path)> get forwarding MAC Table: MAC UUID Source 02:50:56:00:00:00 5b2068d0-8c28-4427-8be4-48f422f92309 controller 02:50:56:00:00:02 eb3bd495-9ce3-40b4-a955-c2ddc4893cfa controller 02:50:56:56:44:52 5b2068d0-8c28-4427-8be4-48f422f92309 controller Replication Tunnels: UUID Local VTEP Remote VTEP MTEP 704d9577-39d4-5b7c-b890-5e5e0bba8d0e 192.168.250.62 192.168.250.63 False
    Mode
    Path
    Availability
    Edge, Public Cloud Gateway

    get forwarding [<prefix>]
    Display the forwarding table for the logical router in the VRF context. Optionally specify a prefix to display only the entry that matches that network.
    Option Description
    <prefix> Network Address argument
    Example
    nsx-edge-1(tier0_sr)> get forwarding Logical Router UUID VRF LR-ID Name Type e9d3379d-aba7-4459-9262-18bc95eaeec1 1 1 SERVICE_ROUTER_TIER0 IPv4 Forwarding Table IP Prefix Gateway IP Type UUID Gateway MAC 127.0.0.1/32 route 4b115e5f-1395-54c3-aaf0-0de5736f99df 172.20.1.0/24 route 6c427841-e151-4479-9184-4196cfcef3b6 172.20.1.60/32 route 4b115e5f-1395-54c3-aaf0-0de5736f99df 172.24.4.1/32 172.20.1.50 route 6c427841-e151-4479-9184-4196cfcef3b6 or nsx-edge-1(tier0_sr)> get forwarding 172.16.110.0/24 Logical Router UUID VRF Name Type e9d3379d-aba7-4459-9262-18bc95eaeec1 1 SERVICE_ROUTER_TIER0 IPv4 Forwarding Table IP Prefix Gateway IP Type UUID Gateway MAC 172.24.4.1/32 172.20.1.50 route 6c427841-e151-4479-9184-4196cfcef3b6
    Mode
    VRF, Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get gateway certificate <ip-address>
    Dump the host's public cloud gateway certificate
    Option Description
    <ip-address> Network IP address argument
    Example
    host-1> get gateway certificate 13.14.41.34 Public Cloud Gateway : 13.14.41.34 Certificate Thumbprint : 2A0489D8990FFB51D9F72190FBCC4052E42BB31F SHA : sha256
    Mode
    Basic
    Availability
    NSX Cloud VM

    get gateway certificates
    Dump the host's public cloud gateway certificates.
    Example
    host-1> get gateway certificates Public Cloud Gateway : 13.14.41.34 Certificate Thumbprint : 2A0489D8990FFB51D9F72190FBCC4052E42BB31F SHA : sha256 Public Cloud Gateway : 13.14.41.35 Certificate Thumbprint : 345489B8990FDB51D9A72190FB0A7042842BB32C SHA : sha256
    Mode
    Basic
    Availability
    NSX Cloud VM

    get gateway connection status
    Dump the host's public cloud gateway connection status.
    Example
    host-1> get gateway connection status Public Cloud Gateway : 13.14.41.34:5555 Connection Status : ESTABLISHED Connection Time : Thu Jun 15 19:12:34 2017 Last Known Error : None
    Mode
    Basic
    Availability
    NSX Cloud VM

    get gw-controller connections
    Dump public cloud gateway connections
    Example
    nsx-public-cloud-gateway> get gw-controller connections ConnectionId Remote IP Endpoint 0 10.10.4.226 ccp 1 127.0.0.1 edge-nsx-agent 6 10.10.4.65 i-0c61c378b52c1588c 7 10.10.4.247 i-05e1618bdffb8e521 8 10.10.4.170 i-0b28602753dbf4e51
    Mode
    Basic
    Availability
    Public Cloud Gateway

    get gw-controller vm-certificate <vm-id>
    Display public cloud VM certificate
    Option Description
    <vm-id> VM ID
    Example
    nsx-public-cloud-gateway>get gw-controller vm-certificate i-00dd27a50b99b29b6 [{'ID': 'i-00dd27a50b99b29b6', 'Thumbprint': '9EB31557EE6B4733E588F4CA51449707132DDC79', 'SHA': 'sha256'}]
    Mode
    Basic
    Availability
    Public Cloud Gateway

    get gw-controller vm-certificates
    Display all public cloud VM certificates
    Example
    nsx-public-cloud-gateway> get gw-controller vm-certificates ID Thumbprint SHA i-00dd27a50b99b29b6 9EB31557EE6B4733E588F4CA51449707132DDC79 sha256 i-05e1618bdffb8e521 2966DCA6F755D04FA87625A18A2671460A753A9E sha256
    Mode
    Basic
    Availability
    Public Cloud Gateway

    get gw-controller vm-state
    Display public cloud VM state for all VMs
    Example
    nsx-public-cloud-gateway-AWS> get gw-controller vm-state ConnID VM ID InstanceName State Quarantine Valid 3 i-00275186c5eab8d1e vm1-test-1 VM_STATE_NORMAL QUARANTINE_STATE_NORMAL TRUE 5 i-00dd27a50b99b29b6 vm2-test-2 VM_STATE_NORMAL QUARANTINE_STATE_NORMAL TRUE nsx-gw1-AZURE> get gw-controller vm-state ConnID VM ID InstanceName State Quarantine Valid 8 0502182d-4db9-48d2-aaf7-a737c8a2f630 vm-test-102 VM_STATE_NORMAL QUARANTINE_STATE_NORMAL TRUE - 3ad0eb11-23c0-4f2f-8855-ee69e747a7a9 vm-test-101 VM_STATE_UNKNOWN QUARANTINE_STATE_ENABLED FALSE
    Mode
    Basic
    Availability
    Public Cloud Gateway

    get gw-controller vm-state <vm-id>
    Display public cloud VM state for specific VM
    Option Description
    <vm-id> VM ID
    Example
    nsx-public-cloud-gateway>get gw-controller vm-state i-0c61c378b52c1588c ID: i-0c61c378b52c1588c Config: Name: vm-10-overlay-test-5 VM ID: i-0c61c378b52c1588c Power State: POWER_STATE_ON Desired version: Interfaces: {'attachment_id': 'eni-b0dd8c8c', 'mac_address_string': '06:95:92:91:ba:0c', 'Secondary_IP': [], 'Tags': [{'value': 'b15e32de-5c02-4b12-999b-86595e3bfa46', 'key': 'nsx:network'}], 'IP': '10.10.4.65', 'Name': u'', 'Device index': '0', 'MAC address': '06:95:92:91:ba:0c', 'ID': 'eni-b0dd8c8c', 'NSX assigned IP': []} Tags: {'value': 'vm-10-overlay-test-5', 'key': 'Name'} {'value': 'vpc-7d0fea1b', 'key': 'aws:vpc'} {'value': 'us-west-2b', 'key': 'aws:availabilityzone'} VM Services: [] Quarantine state: QUARANTINE_STATE_NORMAL SystemTags: [] VM Security groups: [{'Security group': 'sg-6e300315'}] VM Identifiers: [{'value': 'vpc-7d0fea1b', 'key': 'vpc-id'}] State: {'timestamp(ms)': '0', 'VM Version': '2.0.0.0.0.5706753', 'VM OS Version': '14.04', 'VM OS Type': 'UBUNTU', 'State': 'VM_STATE_NORMAL'} ActiveConn: 14 Valid: 1
    Mode
    Basic
    Availability
    Public Cloud Gateway

    get hardening-policy mandatory-access-control report [file <filename> [all]]
    Display the mandatory access control report for possible policy violations. Specify the file argument to write the information to a file with the specified file name. The report is written to this file in a concise format. You can specify the all argument to have a verbose report, which includes exact log messages.
    Option Description
    <filename> Name of file to generate, for example report-bundle.tgz
    Allowed pattern: ^[^/ *;&|]+$
    Example
    nsx-edge-1> get hardening-policy mandatory-access-control report ACTION OPERATION PROFILE DENIED Capable /usr/sbin/tcpdump DENIED Capable /sbin/dhclient nsx-edge-1> get hardening-policy mandatory-access-control report file report.tar.gz report.tar.gz created, use the following command to transfer the file: copy file report.tar.gz url <url> After transferring report.tar.gz, extract it using: tar xzf report.tar.gz nsx-edge-1> get hardening-policy mandatory-access-control report file report_all.tar.gz all report_all.tar.gz created, use the following command to transfer the file: copy file report_all.tar.gz url <url> After transferring report.tar.gz, extract it using: tar xzf report_all.tar.gz
    Mode
    Basic
    Availability
    Controller, Edge, Manager, Policy Manager, Public Cloud Gateway

    get hardening-policy mandatory-access-control status
    This command gets the current status of mandatory access control. Usage for the command is get hardening-policy mandatory-access-control status
    Example
    nsx-edge-1> get hardening-policy mandatory-access-control status Mandatory Access Control is enabled.
    Mode
    Basic
    Availability
    Controller, Edge, Manager, Policy Manager, Public Cloud Gateway

    get high-availability channel local-ip <ip-address> remote-ip <ip-address>
    Display information about the specified high-availability channel.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get high-availability channel local-ip 30.0.246.232 remote-ip 30.0.29.0 High-Availability Channel Cfg_flags : 0x00000000 Ha_transport : 0bb0495e-b525-11e8-b7e8-020045ee019c Channel_if_uuid : 0f02ccfe-0cbf-524a-ba32-6bedaa0429ec Channel_sessions : 1 Channel_state : SYN Ctl_req_seq : 1 Egress_inst_id : b75cdf09-e71f-4574-960a-45f7cc43300b Ingress_inst_id : 00000000-0000-0000-0000-000000000000 Last_tx : 0x1eff538 Local_address : 30.0.246.232 Next_tx : 0x1eff894 Remote_address : 30.0.29.0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability channel local-ip <ip-address> remote-ip <ip-address> stats
    Display statistics for the specified high-availability channel.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get high-availability channel local-ip 30.0.246.232 remote-ip 30.0.29.0 stats High-Availability Session Local_address : 30.0.246.232 Remote_address : 30.0.29.0 Rx_ack_packets : 0 Rx_drop : 0 Rx_drop_bad_version : 0 Rx_drop_inst_unmatch : 0 Rx_drop_intf_unmatch : 0 Rx_drop_ip_unmatch : 0 Rx_drop_pkt_len_unmatch : 0 Rx_drop_pkt_too_short : 0 Rx_drop_seq_unmatch : 0 Rx_drop_wait_syn_ack : 0 Rx_packets : 0 Tx_drop : 0 Tx_error : 0 Tx_packets : 754
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability channels
    Display information about high-availability channels.
    Example
    nsx-edge-1> get high-availability channels High-Availability Channel Cfg_flags : 0x00000000 Ha_transport : 0bb0495e-b525-11e8-b7e8-020045ee019c Channel_if_uuid : 0f02ccfe-0cbf-524a-ba32-6bedaa0429ec Channel_sessions : 1 Channel_state : SYN Ctl_req_seq : 1 Egress_inst_id : b75cdf09-e71f-4574-960a-45f7cc43300b Ingress_inst_id : 00000000-0000-0000-0000-000000000000 Last_tx : 0x1eb115c Local_address : 30.0.246.232 Next_tx : 0x1eb1512 Remote_address : 30.0.29.0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability channels stats
    Display statistics for the high-availability channels.
    Example
    nsx-edge-1> get high-avaiability channels stats High-Availability Session Local_address : 30.0.246.232 Remote_address : 30.0.29.0 Rx_ack_packets : 0 Rx_drop : 0 Rx_drop_bad_version : 0 Rx_drop_inst_unmatch : 0 Rx_drop_intf_unmatch : 0 Rx_drop_ip_unmatch : 0 Rx_drop_pkt_len_unmatch : 0 Rx_drop_pkt_too_short : 0 Rx_drop_seq_unmatch : 0 Rx_drop_wait_syn_ack : 0 Rx_packets : 0 Tx_drop : 0 Tx_error : 0 Tx_packets : 476
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability history state
    Display the high availability state history for the logical router in the VRF context.
    Example
    nsx-edge-1(tier0_sr)> get high-availability history state State : Down Event : Init Resources : Time : 2016-02-02 18:41:22.80 State : Active Event : Node Up Resources : 0 Time : 2016-02-02 18:41:26.91
    Mode
    Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get high-availability session local-service-id <service-id> peer-service-id <service-id>
    Display information about the specified high-availability session.
    Option Description
    <service-id> Service id (0-65535)
    Example
    nsx-edge-1> get high-availability session local-service-id 5 peer-service-id 5 High-Availability Session Cfg_flags : 0x00000000 Ha_transport : 0bb0495e-b525-11e8-b7e8-020045ee019c Last_tx : 0x0 Local_address : 30.0.246.232 Local_service_id : 5 Next_tx : 0x0 Nsxa_req_ha_state : 1 Nsxa_req_msg_type : 0 Peer_ha_state : 255 Peer_service_id : 5 Remote_address : 30.0.29.0 Req_seq : 1 Req_state : active Service_type : service-router
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability session local-service-id <service-id> peer-service-id <service-id> stats
    Display statistics for the specified high-availability session.
    Option Description
    <service-id> Service id (0-65535)
    Example
    nsx-edge-1> get high-availability session local-service-id 5 peer-service-id 5 High-Availability Session Cfg_flags : 0x00000000 Ha_transport : 0bb0495e-b525-11e8-b7e8-020045ee019c Last_tx : 0x0 Local_address : 30.0.246.232 Local_service_id : 5 Next_tx : 0x0 Nsxa_req_ha_state : 1 Nsxa_req_msg_type : 0 Peer_ha_state : 255 Peer_service_id : 5 Remote_address : 30.0.29.0 Req_seq : 1 Req_state : active Service_type : service-router
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability sessions
    Display information about high-availability sessions.
    Example
    nsx-edge-1> get high-availability sessions High-Availability Session Cfg_flags : 0x00000000 Ha_transport : 0bb0495e-b525-11e8-b7e8-020045ee019c Last_tx : 0x0 Local_address : 30.0.246.232 Local_service_id : 5 Next_tx : 0x0 Nsxa_req_ha_state : 1 Nsxa_req_msg_type : 0 Peer_ha_state : 255 Peer_service_id : 5 Remote_address : 30.0.29.0 Req_seq : 1 Req_state : active Service_type : service-router
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability sessions remote-ip <ip-address>
    Display information about high-availability sessions by remote-ip of the channel
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get high-availability sessions remote-ip 30.0.29.0 High-Availability Session Cfg_flags : 0x00000000 Ha_transport : 0bb0495e-b525-11e8-b7e8-020045ee019c Last_tx : 0x0 Local_address : 30.0.246.232 Local_service_id : 5 Next_tx : 0x0 Nsxa_req_ha_state : 1 Nsxa_req_msg_type : 0 Peer_ha_state : 255 Peer_service_id : 5 Remote_address : 30.0.29.0 Req_seq : 1 Req_state : active Service_type : service-router
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability sessions service-type <service-type>
    Display information about high-availability sessions by service-type.
    Option Description
    <service-type> Service type argument is one of {service-router}
    Allowed values: service-router, l2-bridge
    Example
    nsx-edge-1> get high-availability sessions service-type service-router High-Availability Session Cfg_flags : 0x00000000 Ha_transport : 0bb0495e-b525-11e8-b7e8-020045ee019c Last_tx : 0x0 Local_address : 30.0.246.232 Local_service_id : 5 Next_tx : 0x0 Nsxa_req_ha_state : 1 Nsxa_req_msg_type : 0 Peer_ha_state : 255 Peer_service_id : 5 Remote_address : 30.0.29.0 Req_seq : 1 Req_state : active Service_type : service-router
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability sessions service-type <service-type> remote-ip <ip-address>
    Display information about high-availability sessions by service-type and remote-ip of the channel
    Option Description
    <service-type> Service type argument is one of {service-router}
    Allowed values: service-router, l2-bridge
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get high-availability sessions service-type service-router remote-ip 30.0.29.0 High-Availability Session Cfg_flags : 0x00000000 Ha_transport : 0bb0495e-b525-11e8-b7e8-020045ee019c Last_tx : 0x0 Local_address : 30.0.246.232 Local_service_id : 5 Next_tx : 0x0 Nsxa_req_ha_state : 1 Nsxa_req_msg_type : 0 Peer_ha_state : 255 Peer_service_id : 5 Remote_address : 30.0.29.0 Req_seq : 1 Req_state : active Service_type : service-router
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability sessions service-type <service-type> stats
    Display statistics for the high-availability sessions of specified service-type.
    Option Description
    <service-type> Service type argument is one of {service-router}
    Allowed values: service-router, l2-bridge
    Example
    nsx-edge-1> get high-availability session service-type service-router stats High-Availability Session Local_service_id : 5 Peer_service_id : 5 Rx_ack_packets : 0 Rx_drop : 0 Rx_drop_bad_version : 0 Rx_drop_inst_unmatch : 0 Rx_drop_intf_unmatch : 0 Rx_drop_ip_unmatch : 0 Rx_drop_pkt_len_unmatch : 0 Rx_drop_pkt_too_short : 0 Rx_drop_seq_unmatch : 0 Rx_packets : 0 Rx_packets_to_conf_thread : 0 Service_type : service-router Tx_drop : 0 Tx_error : 0 Tx_packets : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability sessions service-type <service-type> sync complete
    Displays any high-availability sessions of a given type who have completed synchronization with peer
    Option Description
    <service-type> Service type argument is one of {service-router}
    Allowed values: service-router, l2-bridge
    Example
    nsx-edge-1> get high-availability sessions service-type service-router sync complete Total : 2 UUID : e371701a-3e7d-4173-a0fc-7311d70f50e6 Type : TIER1 State : Active UUID : 4e425c9e-09c6-4021-bbc7-fab2895a2c09 Type : TIER1 State : Standby
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability sessions service-type <service-type> sync in-progress
    Displays any high-availability sessions of a given type who have not yet completed synchronization with peer
    Option Description
    <service-type> Service type argument is one of {service-router}
    Allowed values: service-router, l2-bridge
    Example
    nsx-edge-1> get high-availability sessions service-type service-router sync in-progress Total : 2 UUID : e371701a-3e7d-4173-a0fc-7311d70f50e6 Type : TIER1 State : Active, waiting for peer to confirm UUID : 4e425c9e-09c6-4021-bbc7-fab2895a2c09 Type : TIER1 State : Down
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability sessions service-type <service-type> sync summary
    Display the synchronization status of high-availability sessions of a given type on current node
    Option Description
    <service-type> Service type argument is one of {service-router}
    Allowed values: service-router, l2-bridge
    Example
    nsx-edge-1> get high-availability service-type service-router sync summary Overview Sync in progress: 2 Sync done : 100 All sync done : false
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability sessions stats
    Display statistics for the high-availability sessions.
    Example
    nsx-edge-1> get high-availability sessions stats High-Availability Global Counters Ha_sessions : 1 Nsxa_err_msg_receive_count : 0 Nsxa_msg_receive_count : 0 Nsxa_notify_count : 0 Nsxa_notify_drop_count : 0 Rx_drop_bad_csum : 0 Rx_drop_bad_version : 0 Rx_drop_count : 0 Rx_drop_intf_type : 0 Rx_drop_non_app : 0 Rx_drop_non_udp : 0 Rx_drop_null_app_peer_session : 0 Rx_drop_null_app_session : 0 Rx_drop_null_intf : 0 Rx_drop_runt_pkt : 0 Rx_drop_udp_len : 0 Tx_drop_count : 0 Tx_drop_no_route : 0 High-Availability Session Local_service_id : 5 Peer_service_id : 5 Rx_ack_packets : 0 Rx_drop : 0 Rx_drop_bad_version : 0 Rx_drop_inst_unmatch : 0 Rx_drop_intf_unmatch : 0 Rx_drop_ip_unmatch : 0 Rx_drop_pkt_len_unmatch : 0 Rx_drop_pkt_too_short : 0 Rx_drop_seq_unmatch : 0 Rx_packets : 0 Rx_packets_to_conf_thread : 0 Service_type : service-router Tx_drop : 0 Tx_error : 0 Tx_packets : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get high-availability status
    Display the high availability status for the logical router in the VRF context.
    Example
    nsx-edge-1(tier1_sr)> get high-availability status Service Router UUID : 4e425c9e-09c6-4021-bbc7-fab2895a2c09 state : Active type : TIER1 mode : A/S failover mode : Non-preemptive rank : 0 service count : 1 service score : 0 HA ports state UUID : 733d7ed3-1daa-4c28-bc0a-77e3736fea14 op_state : Up addresses : 169.0.0.2/28
    Mode
    Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get host-switch <host-switch-name> dvport <dvport-id> ipfix setting
    Display IPFIX setting on the specified DVPort of the specified host switch
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get host-switch nsxvswitch dvport cdb36fdd-a3ec-494e-9b7b-60a8c6af5b70 ipfix setting Host IPFIX setting -------------------------------------------------------------------------- activeTimeout : 8 idleTimeout : 15 sampleRate : 1000 obsDomainID : 0 sourceIP : 0.0.0.0 internalFlowsOnly : 0 virtualObsID : collectors : 192.168.7.3 5003
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> dvport <dvport-id> ipfix stats
    Display IPFIX stats on the specified DVPort of the specified host switch
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get host-switch nsxvswitch dvport cdb36fdd-a3ec-494e-9b7b-60a8c6af5b70 ipfix stats Host IPFIX stats -------------------------------------------------------------------------- flows : 0 currentFlows : 0 pktsSent : 10 pktsSenterrors : 0 sampleok : 0 ipv4ok : 0 ipv6ok : 0 sampleerrors : 0 unsupportedproto : 0 ipv4errors : 0 ipv6errors : 0 etherrors : 0 inputiferrors : 0 outputiferrors : 0 allocerrors : 0 ipv4headererrors : 0 ipv6headererrors : 0 ipv4unsupportedproto: 0 ipv6unsupportedproto: 0 ipv4missingfrags : 0 ipv6missingfrags : 0 pktattrerrors : 0
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> dvport <dvport-id> mcast-filter
    Display the mcast filter mode for the specified host switch and dvPort
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get host-switch nsxvswitch dvport 73c6d671-32e0-4e74-95a0-bf604c0e0669 mcast-filter Host Switch DVPort Mcast Filter Entry --------------------------------------------------------------------------- Legacy Filter Entry =========================================================================== 33:33:ff:69:ae:cd 33:33:00:00:00:01 01:00:5e:00:00:01 IGMP Filter Entry =========================================================================== 224.1.1.2 MLD Filter Entry ===========================================================================
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> dvport <dvport-id> mcast-filter <entry-mode> <entry-group>
    Display the mcast filter stata of the specified entry
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    <entry-mode> Mode of a mcast filter entry
    Allowed values: igmp, mld
    <entry-group> Group address of a mcast filter entry
    Allowed pattern: ^([A-Fa-f0-9.:]+)$
    Example
    esx-1> get host-switch nsxvswitch dvport 73c6d671-32e0-4e74-95a0-bf604c0e0669 mcast-filter igmp 224.1.1.2 Host Switch DVPort Mcast Filter Entry Status --------------------------------------------------------------------------- VNI : 41864 version : 3 srcIPFilterMode : INCLUDE updateTime : 35 srcIPs : 192.168.1.4 192.168.1.5
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> ipfix stats
    Display IPFIX stats on the specified host switch
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    Example
    esx-1> get host-switch nsxvswitch ipfix stats Host IPFIX stats -------------------------------------------------------------------------- flows : 0 currentFlows : 0 pktsSent : 10 pktsSenterrors : 0 sampleok : 0 ipv4ok : 0 ipv6ok : 0 sampleerrors : 0 unsupportedproto : 4 ipv4errors : 0 ipv6errors : 0 etherrors : 0 inputiferrors : 0 outputiferrors : 0 allocerrors : 0 ipv4headererrors : 0 ipv6headererrors : 0 ipv4unsupportedproto: 0 ipv6unsupportedproto: 0 ipv4missingfrags : 0 ipv6missingfrags : 0 pktattrerrors : 0
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> mcast-filter
    Display the mcast filter mode for the specified host switch.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    Example
    esx-1> get Host-switch nsxvswitch mcast-filter Host Switch Mcast Filter --------------------------------------------------------------------------- Mode : Snooping
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> mirror-session <mirror-session-id>
    Display the stats of mirror on the specified host switch.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <mirror-session-id> Mirror session identifier UUID
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get host-switch nsxvswitch mirror-session a779b62e-7711-47ad-8d54- 5cb166d061af Mirror Session ========================================================== UUID : a779b62e-7711-47ad-8d54-5cb166d061af Direction : Both Snap Length : 0 Source : 9484c882-76e6-4f9e-85c4-087968963769;34b19ace-8396-4 dd2-9b92-5867b1bf30ef;vmnic1(Encap) Destination : 79b8f233-4c22-49ce-b270-3802796de856 EncapVlan : OrigialVlan : EncapType : GreKey : ERspanID : Filter : Source IPs : 10.1.1.1 : 2000:1/64 Destination IPs : 20.1.1.1 : 2000:2/64 IP Protocol : TCP Source Ports : 234 Destination Ports : 2999-4000 Action : Mirror
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> mirror-sessions
    Display the mirror settings on the specified host switch.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    Example
    esx-1> get host-switch nsxvswitch mirror-sessions Mirror Session Summary ============================================================ Mirror UUID Direction Snap Length a779b62e-7711-47ad-8d54-5cb166d061af Both 0
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> tunnel <local_ip> <remote_ip>
    Display Tunnel Detail info on the specified DVPort of the specified host switch.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <local_ip> Local IP
    <remote_ip> Remote IP
    Example
    esx-1> get host-switch tunnel 10.0.0.1 20.0.0.1 Local State :up Remote State :up Local Diag :None Remote Diag :None min_rx :100 min_tx :1000 local_disc :0xabcdef remote_disc :0x123456 Tx Interval :1000 Rx Interval :100 mult :3
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> tunnels
    Display Tunnels info on the specified host switch.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    Example
    esx-1> get host-switch tunnels Local IP Remote IP Local State Remote State 10.0.0.1 20.0.0.1 Up Init 10.0.0.1 30.0.0.1 Up Up 10.0.0.1 40.0.0.1 Down Down
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> uplink <uplink> ipfix setting
    Display IPFIX setting on the specified uplink of the specified host switch
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <uplink> Uplink identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get host-switch nsxvswitch uplink vmnic1 ipfix setting Host IPFIX setting -------------------------------------------------------------------------- activeTimeout : 8 idleTimeout : 15 sampleRate : 1000 obsDomainID : 0 sourceIP : 0.0.0.0 internalFlowsOnly : 0 virtualObsID : Uplink-0x03000002 collectors : 192.168.7.3 5003
    Mode
    Basic
    Availability
    ESXi

    get host-switch <host-switch-name> uplink <uplink> ipfix stats
    Display IPFIX stats on the specified uplink of the specified host switch
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <uplink> Uplink identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get host-switch nsxvswitch uplink vmnic1 ipfix stats Host IPFIX stats -------------------------------------------------------------------------- flows : 0 currentFlows : 0 pktsSent : 0 pktsSenterrors : 0 sampleok : 0 ipv4ok : 0 ipv6ok : 0 sampleerrors : 0 unsupportedproto : 4 ipv4errors : 0 ipv6errors : 0 etherrors : 0 inputiferrors : 0 outputiferrors : 0 allocerrors : 0 ipv4headererrors : 0 ipv6headererrors : 0 ipv4unsupportedproto: 0 ipv6unsupportedproto: 0 ipv4missingfrags : 0 ipv6missingfrags : 0 pktattrerrors : 0
    Mode
    Basic
    Availability
    ESXi

    get host-switch vlan-table
    Display VLAN table for the host switch.
    Example
    nsx-edge-1> get host-switch vlan-table VLAN : 100 MAC : 02:50:56:00:00:03 Ingress Port name : fp-eth0 ID : 0 Egress Port port : 783a05cd-033d-4891-ad11-7c082641e069 ifuid : 274 VLAN : 250 MAC : 04:00:c0:a8:fa:a2 Ingress Port name : fp-eth1 ID : 1 Egress Port port : 7bd1dd3d-97eb-5312-9d0d-b26c148a4fac ifuid : 296
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get host-switches
    Display information about all host switches.
    Example
    nsx-edge-1> get host-switches Host Switch : 8d4c2128-e748-4878-8314-ad8414f7f943 Switch Name : vlanswitch Transport Zone : 4e9a90b7-96de-4102-a9bf-1f3733eb3375 Physical Port : fp-eth0 Uplink Name : uplink1 Host Switch : d7ea327f-2569-4b1c-b7cf-8cd4c85ebb18 Switch Name : hostswitch Transport Zone : 9bc2392d-b7ee-4cf9-9200-7d082f199aef Physical Port : fp-eth1 Uplink Name : uplink1 Transport VLAN : 250 Default Gateway : 192.168.250.1 Subnet Mask : 255.255.255.0 Local VTEP Device : fp-eth1 Local VTEP IP : 192.168.250.162
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get hostname
    Display the system hostname.
    Example
    nsx> get hostname nsx
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get hugepage
    Display hugepage information, including total system memory, hugepage sizes supported and hugepage pools.
    Example
    nsx-edge-1> get hugepage Total system memory 3949 MB Hugepage sizes supported 2097152 Hugepage pools Size Minimum Current Maximum Default 2097152 987 987 987 *
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get hyperbus app-id <string> cif-config
    Display the container interface (CIF) configuration for the specified app.
    Option Description
    <string> Application ID
    Allowed pattern: ^.*$
    Example
    kvm-1> get hyperbus app-id c1-vm2ebc cif-config AppID LSPID LRPID VIFID LSID MAC IP GatewayIP Vlan Version c1-vm2ebc 939e3ef4-3f42-4a12-a125-24a9ef5035a9 00000000-0000-0000-0000-000000000000 b819f915-6f8f-4b9d-a816-9c7c3f44f830 db3d238f-4528-4fb3-9f94-bb2f61cc49b5 aa:bb:cc:dd:ee:11 192.168.102.11 0.0.0.0 11 1
    Mode
    Basic
    Availability
    ESXi, KVM

    get hyperbus cif-table
    Display the container interface (CIF) configuration table.
    Example
    kvm-1> get hyperbus cif-table Type AppID LSPID LRPID VIFID LSID MAC IP GatewayIP Vlan Version Parent VIF 93d80cc9-9654-4300-93d2-8a27925feebd 00000000-0000-0000-0000-000000000000 b819f915-6f8f-4b9d-a816-9c7c3f44f830 775a3d45-063d-40b2-8a89-8e102fc7bbb9 00:00:00:00:00:00 0.0.0.0 0.0.0.0 0 1 Link LSP 0dd90579-e3cc-4f9c-b5f3-cfbe16d82d0d be3d0a5a-f80d-456f-89c7-33219090fdcb db3d238f-4528-4fb3-9f94-bb2f61cc49b5 00:00:00:00:00:00 0.0.0.0 192.168.102.1 0 1 Link LSP 22e38f1c-453a-4821-a0f1-de77af397000 3ad6ec1f-72f3-45ad-8201-eb8b67d25682 18f9821a-9844-4ba1-bb0e-b975eacbdabf 00:00:00:00:00:00 0.0.0.0 192.168.101.1 0 1 Child CIF c1-vm2ebc 939e3ef4-3f42-4a12-a125-24a9ef5035a9 00000000-0000-0000-0000-000000000000 b819f915-6f8f-4b9d-a816-9c7c3f44f830 db3d238f-4528-4fb3-9f94-bb2f61cc49b5 aa:bb:cc:dd:ee:11 192.168.102.11 0.0.0.0 11 1
    Mode
    Basic
    Availability
    ESXi, KVM

    get hyperbus connection info
    Display the virtual interface (VIF) connection information.
    Example
    kvm-1> get hyperbus connection info VIFID Connection Status db4f717e-d0dd-4552-a99b-5a5839f3e06d 169.254.1.10:2345 HEALTHY
    Mode
    Basic
    Availability
    ESXi, KVM

    get hyperbus logical-switch-port <logical-switch-port-ID> cif-config
    Display the container interface (CIF) configuration for the specified logical switch port.
    Option Description
    <logical-switch-port-ID> Logical switch port ID
    Allowed pattern: ^[0-9]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get hyperbus logical-switch-port 939e3ef4-3f42-4a12-a125-24a9ef5035a9 cif-config Type AppID LSPID LRPID VIFID LSID MAC IP GatewayIP Vlan Version Child CIF c1-vm2ebc 939e3ef4-3f42-4a12-a125-24a9ef5035a9 00000000-0000-0000-0000-000000000000 b819f915-6f8f-4b9d-a816-9c7c3f44f830 db3d238f-4528-4fb3-9f94-bb2f61cc49b5 aa:bb:cc:dd:ee:11 192.168.102.11 0.0.0.0 11 1
    Mode
    Basic
    Availability
    ESXi, KVM

    get hyperbus vif-id <vif-ID> connection info
    Display the connection information for the specified virtual interface (VIF).
    Option Description
    <vif-ID> VIF ID
    Allowed pattern: ^[0-9]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get hyperbus vif-id db4f717e-d0dd-4552-a99b-5a5839f3e06d connection info VIFID Connection Status db4f717e-d0dd-4552-a99b-5a5839f3e06d 169.254.1.10:2345 HEALTHY
    Mode
    Basic
    Availability
    ESXi, KVM

    get hyperbus vif-id <vif-ID> lip
    Display the logical IP (LIP) for the specified virtual interface (VIF).
    Option Description
    <vif-ID> VIF ID
    Allowed pattern: ^[0-9]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get hyperbus vif-id db4f717e-d0dd-4552-a99b-5a5839f3e06d lip VIFID LIP db4f717e-d0dd-4552-a99b-5a5839f3e06d 169.254.1.10
    Mode
    Basic
    Availability
    ESXi, KVM

    get hyperbus vif-lip-table
    Display the VIF (virtual interface) LIP (logical IP) table.
    Example
    kvm-1> get hyperbus vif-lip-table VIFID LIP State db4f717e-d0dd-4552-a99b-5a5839f3e06d 169.254.1.10 LSP_ATTACHMENT/VIF_CONNECT
    Mode
    Basic
    Availability
    ESXi, KVM

    get hyperbus vif-table
    Display the connected virtual interfaces (VIFs). For ESXi, all connected container host VIFs are displayed. For KVM, all connected container host VIFs and CIFs are displayed.
    Example
    kvm-1> get hyperbus vif-table VIFID Version b819f915-6f8f-4b9d-a816-9c7c3f44f830 1 c1-vm2ebc 1
    Mode
    Basic
    Availability
    ESXi, KVM

    get interface <interface-name>
    Display information about the specified network interface.
    Option Description
    <interface-name> Network interface argument
    Example
    nsx> get interface eth0 Interface: eth0 Address: 192.168.110.108/24 MAC address: 00:50:56:8e:13:51 MTU: 1500 Default gateway: 192.168.110.1 Broadcast address: 192.168.110.255 Link status: up Admin status: up RX packets: 1634378 RX bytes: 333335650 RX errors: 0 RX dropped: 276 TX packets: 1441590 TX bytes: 286624283 TX errors: 0 TX dropped: 0 TX collisions: 0
    Mode
    Basic
    Availability
    Controller, Manager, Policy Manager

    get interface <interface-name>
    Display information about the specified network interface.
    Option Description
    <interface-name> Network interface argument
    Example
    nsx-edge> get interface eth0 Interface: eth0 Address: 192.168.110.111/24 MAC address: 00:50:56:8e:e8:2e MTU: 1500 Default gateway: 192.168.110.1 Broadcast address: 0.0.0.0 Link status: up Admin status: up RX packets: 66493 RX bytes: 12712191 RX errors: 0 RX dropped: 0 TX packets: 58436 TX bytes: 15051574 TX errors: 0 TX dropped: 0 TX collisions: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get interfaces
    Display interface information for the logical router in the VRF context.
    Example
    nsx-edge-1(vrf)> get interfaces UUID VRF LR-ID Name Type 736a80e3-23f6-5a2d-81d6-bbefb2786666 0 0 R1 TUNNEL interfaces interface : 9fd3c667-32db-5921-aaad-7a88c80b5e9f ifuid : 258 mode : blackhole interface : 34ca595f-fa62-5ed4-afcc-a6ef0195d4ed ifuid : 261 mode : lif IP/Mask : 142.134.61.36/24 MAC : 00:0c:29:5a:96:2b VLAN id : untagged LS port : 238d7422-e488-5cee-9639-1894b8ab56e2 urpf-mode : NONE admin : up op_state : up MTU : 1600 interface : f322c6ca-4298-568b-81c7-a006ba6e6c88 ifuid : 257 mode : cpu
    Mode
    VRF, Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get interfaces
    Display information about all network interfaces.
    Example
    nsx-edge> get interfaces Interface: eth0 Address: 192.168.110.111/24 MAC address: 00:50:56:8e:e8:2e MTU: 1500 Default gateway: 192.168.110.1 Broadcast address: 0.0.0.0 Link status: up Admin status: up RX packets: 66307 RX bytes: 12698263 RX errors: 0 RX dropped: 0 TX packets: 58340 TX bytes: 15041724 TX errors: 0 TX dropped: 0 TX collisions: 0 Interface: lo Address: 127.0.0.1/8 MTU: 65536 Link status: up Admin status: up RX packets: 221628 RX bytes: 54868485 RX errors: 0 RX dropped: 0 TX packets: 221628 TX bytes: 54868485 TX errors: 0 TX dropped: 0 TX collisions: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get interfaces
    Display information about all network interfaces.
    Example
    nsx> get interfaces Interface: eth0 Address: 192.168.110.108/24 MAC address: 00:50:56:8e:13:51 MTU: 1500 Default gateway: 192.168.110.1 Broadcast address: 192.168.110.255 Link status: up Admin status: up RX packets: 1636181 RX bytes: 333661267 RX errors: 0 RX dropped: 276 TX packets: 1443225 TX bytes: 286925131 TX errors: 0 TX dropped: 0 TX collisions: 0 Interface: lo Address: 127.0.0.1/8 MTU: 65536 Link status: up Admin status: up RX packets: 10410417 RX bytes: 2281216307 RX errors: 0 RX dropped: 0 TX packets: 10410417 TX bytes: 2281216307 TX errors: 0 TX dropped: 0 TX collisions: 0
    Mode
    Basic
    Availability
    Controller, Manager, Policy Manager

    get interfaces stats
    Display the interface statistics for the logical router in the VRF context.
    Example
    nsx-edge-1(tier0_sr)> get interfaces stats Logical Router UUID : e9d3379d-aba7-4459-9262-18bc95eaeec1 VRF : 1 LR-ID : 1 name : R2 type : SERVICE_ROUTER_TIER0 Statistics Interface Type RX PKTS TX PKTS RX BYTES TX BYTES RX Drops TX Drops b83cb77f-ca34-595c-a3e1-76278f0dcb00 blackhole 0 0 0 0 0 0 4b115e5f-1395-54c3-aaf0-0de5736f99df cpu 8 0 648 0 8 0 6c427841-e151-4479-9184-4196cfcef3b6 lif 5601 11 1915542 462 5601 0 081e2e50-2f0e-42e1-8764-80a127dd3918 lif 0 0 0 0 0 0 00003300-0000-0000-0000-000000000002 loopback 8 0 648 0 8 0 Total 5617 11 1916838 462 5617 0
    Mode
    VRF, Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get ip-discovery bindings
    Display discovered bindings.
    Example
    kvm-1> get ip-discovery bindings IP Discovery Bindings -------------------------------------------------------------------------------------------------------------------------------------------- Logical Port Discovery Type IP MAC VLAN Expires In Sec d722c9c8-cd9d-4218-91c0-2728ced19d74 ND_Snooping 5000::10 ca:2c:ff:ec:3c:87 0 403 d722c9c8-cd9d-4218-91c0-2728ced19d74 ND_Snooping fe80::c82c:ffff:feec:3c87 ca:2c:ff:ec:3c:87 0 413 d722c9c8-cd9d-4218-91c0-2728ced19d74 ARP_Snooping 172.16.1.10 ca:2c:ff:ec:3c:87 0 153
    Mode
    Basic
    Availability
    KVM

    get ip-discovery bindings <host-switch-name> <dvport-id>
    Display ip discovery bindings for a host switch and dvport.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get ip-discovery bindings nsxvswitch nsxvswitch b65dcac9-6611-41ce-b96c-69255120b473 IP Discovery Bindings ---------------------------------------------------------------------------------------------------- Discovery Type IP MAC VLAN Expires in sec ARP Snooping 192.168.1.10 00:50:56:a9:fb:f1 0 599
    Mode
    Basic
    Availability
    ESXi

    get ip-discovery bindings <host-switch-name> <dvport-id> ipv4
    Display ipv4 discovery bindings for a host switch and dvport.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get ip-discovery bindings nsxvswitch b65dcac9-6611-41ce-b96c-69255120b473 ipv4 IP Discovery Bindings ---------------------------------------------------------------------------------------------------- Discovery Type IP MAC VLAN Expires in sec ARP Snooping 192.168.1.10 00:50:56:a9:fb:f1 0 599
    Mode
    Basic
    Availability
    ESXi

    get ip-discovery bindings <host-switch-name> <dvport-id> ipv6
    Display ipv6 discovery bindings for a host switch and dvport.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get ip-discovery bindings nsxvswitch b65dcac9-6611-41ce-b96c-69255120b473 ipv6 IP Discovery Bindings ---------------------------------------------------------------------------------------------------- Discovery Type IP MAC VLAN Expires in sec ARP Snooping 2000::1 00:50:56:a9:fb:f1 0 599
    Mode
    Basic
    Availability
    ESXi

    get ip-discovery bindings <logical-port>
    Display discovered bindings for a given logical port.
    Option Description
    <logical-port> Log port ID argument
    Example
    kvm-1> get ip-discovery bindings d722c9c8-cd9d-4218-91c0-2728ced19d74 IP Discovery Bindings -------------------------------------------------------------------------------------------------------------- Discovery Type IP MAC VLAN Expires In Sec ND_Snooping 5000::10 ca:2c:ff:ec:3c:87 0 598 ARP_Snooping 172.16.1.10 ca:2c:ff:ec:3c:87 0 600 ND_Snooping fe80::c82c:ffff:feec:3c87 ca:2c:ff:ec:3c:87 0 598
    Mode
    Basic
    Availability
    KVM

    get ip-discovery bindings <logical-port> <ip-version>
    Display discovered bindings for a given logical port and type.
    Option Description
    <logical-port> Log port ID argument
    <ip-version> Internet Protocol Version (IPV4 or IPV6)
    Allowed values: ipv4, ipv6
    Example
    kvm-1> get ip-discovery bindings d722c9c8-cd9d-4218-91c0-2728ced19d74 ipv4 IP Discovery Bindings -------------------------------------------------------------------------------------------------------------- Discovery Type IP MAC VLAN Expires In Sec ARP_Snooping 172.16.1.10 ca:2c:ff:ec:3c:87 0 600 kvm-1> get ip-discovery bindings d722c9c8-cd9d-4218-91c0-2728ced19d74 ipv6 IP Discovery Bindings -------------------------------------------------------------------------------------------------------------- Discovery Type IP MAC VLAN Expires In Sec ND_Snooping 5000::10 ca:2c:ff:ec:3c:87 0 598
    Mode
    Basic
    Availability
    KVM

    get ip-discovery config
    Display ip-discovery profile for all logical ports.
    Example
    kvm-1> get ip-discovery config IP Discovery Config --------------------------------------------------------------------------- Logical Port : d722c9c8-cd9d-4218-91c0-2728ced19d74 ARP Snooping : Enabled DHCPV4 Snooping : Enabled ND Snooping : Disabled DHCPV6 Snooping : Disabled ARP/ND Expiry Timeout : 10 min Logical Port : 0fe4864f-b2d9-4a91-af8b-9b92593f548e ARP Snooping : Enabled DHCPV4 Snooping : Enabled ND Snooping : Disabled DHCPV6 Snooping : Disabled ARP/ND Expiry Timeout : 10 min
    Mode
    Basic
    Availability
    KVM

    get ip-discovery config <host-switch-name> <dvport-id>
    Display IP discovery config for a host switch and dvport.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get ip-discovery config nsxvswitch b65dcac9-6611-41ce-b96c-69255120b473 IP Discovery Config --------------------------------------------------------------------------- ARP Snooping : Enabled DHCPV4 Snooping : Enabled ND Snooping : Enabled DHCPV6 snooping : Enabled ARP/ND Expiry Timeout : 600
    Mode
    Basic
    Availability
    ESXi

    get ip-discovery config <logical-port>
    Display ip-discovery config for a given logical port.
    Option Description
    <logical-port> Log port ID argument
    Example
    kvm-1> get ip-discovery config 2339fe58-b71f-42d3-ae67-41957cbb18da IP Discovery Config --------------------------------------------------------------------------- ARP Snooping : Enabled DHCPV4 Snooping : Enabled ND Snooping : Disabled DHCPV6 Snooping : Disabled ARP/ND Expiry Timeout : 10 min
    Mode
    Basic
    Availability
    KVM

    get ip-discovery ignore-list
    Display ignore bindings list.
    Example
    kvm-1> get ip-discovery ignore-list IP Discovery Ignore List -------------------------------------------------------------------------------------------------------------- LogicalPort IP MAC VLAN 2339fe58-b71f-42d3-ae67-41957cbb18da 6000::254 00:23:20:05:5f:5d 0 2339fe58-b71f-42d3-ae67-41957cbb18da 192.168.37.143 00:23:20:05:5f:5d 0 2339fe58-b71f-42d3-ae67-41957cbb18da 192.168.37.150 00:23:20:05:5f:5d 0
    Mode
    Basic
    Availability
    KVM

    get ip-discovery ignore-list <host-switch-name> <dvport-id>
    Display ip discovery ignore list for a host switch and dvport.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get ip-discovery ignore-list nsxvswitch b65dcac9-6611-41ce-b96c-69255120b473 IP Discovery Ignore List ------------------------------------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    ESXi

    get ip-discovery ignore-list <logical-port>
    Display ignore bindings list for a given logical port.
    Option Description
    <logical-port> Log port ID argument
    Example
    kvm-1> get ip-discovery ignore-list 2339fe58-b71f-42d3-ae67-41957cbb18da IP Discovery Ignore List --------------------------------------------------------------------------- IP MAC VLAN 6000::254 00:23:20:05:5f:5d 0 192.168.37.143 00:23:20:05:5f:5d 0 192.168.37.150 00:23:20:05:5f:5d 0
    Mode
    Basic
    Availability
    KVM

    get ip-discovery ignore-list <logical-port> <ip-version>
    Display ignore bindings list for a given logical port and type.
    Option Description
    <logical-port> Log port ID argument
    <ip-version> Internet Protocol Version (IPV4 or IPV6)
    Allowed values: ipv4, ipv6
    Example
    kvm-1> get ip-discovery ignore-list 2339fe58-b71f-42d3-ae67-41957cbb18da ipv6 IP Discovery Ignore List --------------------------------------------------------------------------- IP MAC VLAN 6000::254 00:23:20:05:5f:5d 0
    Mode
    Basic
    Availability
    KVM

    get ip-discovery ignore-list stats
    Display ip-discovery ignore list stats for all logical ports.
    Example
    kvm-1> get ip-discovery ignore-list stats IP Discovery Ignore List Stats ------------------------------------------------------------------------------------------ LogicalPort V4 Ignore Count V6 Ignore Count 2339fe58-b71f-42d3-ae67-41957cbb18da 0 0
    Mode
    Basic
    Availability
    KVM

    get ip-discovery ignore-list stats <host-switch-name> <dvport-id>
    Display ip discovery ignore list stats for a host switch and dvport.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get ip-discovery ignore-list stats nsxvswitch b65dcac9-6611-41ce-b96c-69255120b473 IP Discovery Ignorelist Stats ------------------------------------------------------------------------------------------------------------------------ V4 Ignore Count : 0 V6 Ignore Count : 0
    Mode
    Basic
    Availability
    ESXi

    get ip-discovery ignore-list stats <logical-port>
    Display ip-discovery ignore list stats for a given logical ports.
    Option Description
    <logical-port> Log port ID argument
    Example
    kvm-1> get ip-discovery ignore-list stats 2339fe58-b71f-42d3-ae67-41957cbb18da IP Discovery Ignore List Stats -------------------------------------------------- V4 Ignore Count V6 Ignore Count 0 0
    Mode
    Basic
    Availability
    KVM

    get ip-discovery stats
    Display ip-discovery stats for all logical ports.
    Example
    kvm-1> get ip-discovery stats IP Discovery Stats --------------------------------------------------------------------------- Logical Port : 2339fe58-b71f-42d3-ae67-41957cbb18da MAX ARP Entries : 3 Total Active ARP Entries : 0 Total Expired ARP Entries : 3 MAX DHCPV4 Entries : 128 Total DHCPV4 Entries : 0 MAX Pending DHCPV4 Reqs : 128 Total Pending DHCPV4 Reqs : 0 MAX ND Entries : 3 Total Active ND Entries : 0 Total Expired ND Entries : 0 MAX DHCPV6 Entries : 15 Total DHCPV6 Entries : 0 MAX Pending DHCPV6 Reqs : 15 Total Pending DHCPV6 Reqs : 0
    Mode
    Basic
    Availability
    KVM

    get ip-discovery stats <host-switch-name> <dvport-id>
    Display ip discovery stats for a host switch and dvport.
    Option Description
    <host-switch-name> Host switch name
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    <dvport-id> DVPort identifier
    Allowed pattern: ^([A-Za-z0-9_:-]+)$
    Example
    esx-1> get ip-discovery stats nsxvswitch b65dcac9-6611-41ce-b96c-69255120b473 IP Discovery Stats ------------------------------------------------------------------------------------------------------------------------ MAX ARP Entries : 256 Total Active ARP Entries : 0 Total Expired ARP Entries : 0 MAX DHCPV4 Entries : 128 Total DHCPV4 Entries : 0 MAX Pending DHCPV4 Reqs : 128 Total Pending DHCPV4 Reqs : 0 MAX ND Entries : 30 Total Active ND Entries : 0 Total Expired ND Entries : 0 MAX DHCPV6 Entries : 15 Total DHCPV6 Entries : 0 MAX Pending DHCPV6 Reqs : 15 Total Pending DHCPV6 Reqs : 0
    Mode
    Basic
    Availability
    ESXi

    get ip-discovery stats <logical-port>
    Display ip-discovery profile for a given logical port.
    Option Description
    <logical-port> Log port ID argument
    Example
    kvm-1> get ip-discovery stats 2339fe58-b71f-42d3-ae67-41957cbb18da IP Discovery Stats --------------------------------------------------------------------------- MAX ARP Entries : 3 Total Active ARP Entries : 0 Total Expired ARP Entries : 3 MAX DHCPV4 Entries : 128 Total DHCPV4 Entries : 0 MAX Pending DHCPV4 Reqs : 128 Total Pending DHCPV4 Reqs : 0 MAX ND Entries : 3 Total Active ND Entries : 0 Total Expired ND Entries : 0 MAX DHCPV6 Entries : 15 Total DHCPV6 Entries : 0 MAX Pending DHCPV6 Reqs : 15 Total Pending DHCPV6 Reqs : 0
    Mode
    Basic
    Availability
    KVM

    get ipsecvpn ca-certificate <uuid>
    Display full information from a specific CA Certificate
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn ca-certificate 77d3d1fb-82f9-4805-b7db-848465304001 UUID : 77d3d1fb-82f9-4805-b7db-848465304001 Certificate:
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ca-certificates
    Display Subject Name from all CA Certificates.
    Example
    nsx-edge-1>get ipsecvpn ca-certificates UUID : 77d3d1fb-82f9-4805-b7db-848465304001 Subject : UUID : 77d3d1fb-82f9-4805-b7db-848465304002 Subject : UUID : 77d3d1fb-82f9-4805-b7db-848465304003 Subject :
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ca-certificates verbose
    Display full information from all CA Certificates.
    Example
    nsx-edge-1>get ipsecvpn ca-certificates verbose UUID : 77d3d1fb-82f9-4805-b7db-848465304001 Certificate: UUID : 77d3d1fb-82f9-4805-b7db-848465304001 Certificate: UUID : 77d3d1fb-82f9-4805-b7db-848465304001 Certificate:
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn certificate <uuid>
    Display complete information from a specific Certifiate.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn certificate 77d3d1fb-82f9-4805-b7db-848465304000 UUID : 77d3d1fb-82f9-4805-b7db-848465304000 Certificate:
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn certificates
    Display Subject Names from all Certificates.
    Example
    nsx-edge-1> get ipsecvpn certificates UUID : 77d3d1fb-82f9-4805-b7db-848465304000 Subject : C=IN, ST=Maharashtra, O=VMware, OU=NSBU, CN=left
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn certificates verbose
    Display complete information from all Certificates.
    Example
    nsx-edge-1> get ipsecvpn certificates verbose UUID : 77d3d1fb-82f9-4805-b7db-848465304000
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config dpd-profile
    Display all configured Dead Peer Detection profiles.
    Example
    nsx-edge-1> get ipsecvpn config dpd-profile UUID : 00000000-0000-0001-0000-000000000001 Enabled : True DPD Probe Interval : 200 sec
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config dpd-profile <uuid>
    Display configured Dead Peer Detection profile.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn config dpd-profile 78b17d39-22ad-47bb-a23d-bea7dc13bc44 Enabled : True DPD Probe Interval : 200 sec
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config ike-profile
    Display all configured IKE profiles.
    Example
    nsx-edge-1> get ipsecvpn config ike-profile UUID : 00000000-0000-0001-0000-000000000002 Authentication Algorithm : AUTH_HMAC_SHA1 Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 200 sec
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config ike-profile <uuid>
    Display configured IKE profile.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn config ike-profile 00000000-0000-0001-0000-000000000002 UUID : 00000000-0000-0001-0000-000000000002 Authentication Algorithm : AUTH_HMAC_SHA1 Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 200 sec
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config local-endpoint
    Display all configured IPSec local endpoint profiles.
    Example
    nsx-edge-1> get ipsecvpn config local-endpoint UUID : 00000000-0000-0001-0000-000000000004 Local Address : Ipv4 : 10.112.202.147 Local ID : local_edp_1 Local ID Type : IPSEC_IP_ADDR_TYPE Certificate Authority : UUID : 77d3d1fb-82f9-4805-b7db-848465304001 UUID : 77d3d1fb-82f9-4805-b7db-848465304002 UUID : 77d3d1fb-82f9-4805-b7db-848465304003 Certificate : UUID : 77d3d1fb-82f9-4805-b7db-848465304000 Certificate Revocation List ID : UUID : d812f9e9-f047-4eb7-876b-3e3b88332c10
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config local-endpoint <uuid>
    Display configured IPSec local endpoint profile.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn config local endpoint 78b17d39-22ad-47bb-a0da-792f7e89bc47 Local Address : Ipv4 : 10.112.202.147 Local ID : local_edp_1 Local ID Type : IPSEC_IP_ADDR_TYPE Certificate Authority : UUID : 77d3d1fb-82f9-4805-b7db-848465304001 UUID : 77d3d1fb-82f9-4805-b7db-848465304002 UUID : 77d3d1fb-82f9-4805-b7db-848465304003 Certificate : UUID : 77d3d1fb-82f9-4805-b7db-848465304000 Certificate Revocation List ID : UUID : d812f9e9-f047-4eb7-876b-3e3b88332c10
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config local-endpoint <uuid> ca-certificates
    Display all CA-Certificates for a specific IPsec Local Endpoint.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn config local-endpoint 78b17d39-22ad-47bb-a0da-7922f7e89bc47 ca-certificates UUID : 77d3d1fb-82f9-4805-b7db-848465304001 Certificate: UUID : 77d3d1fb-82f9-4805-b7db-848465304002 Certificate: UUID : 77d3d1fb-82f9-4805-b7db-848465304003 Certificate:
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config local-endpoint <uuid> certificate
    Display Certificate for a specific IPsec Local Endpoint.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn config local-endpoint 78b17d39-22ad-47bb-a0da-792f7e89bc47 certificate UUID : 77d3d1fb-82f9-4805-b7db-848465304000 Certificate:
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config local-endpoint <uuid> crls
    Display all CRLs for a specific IPsec Local Endpoint.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn config local-endpoint 78b17d39-22ad-47bb-a0da-7922f7e89bc47 crls UUID : d812f9e9-f047-4eb7-876b-3e3b88332c10 Certificate Revocation List (CRL):
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config peer-endpoint
    Display all configured IPSec peer endpoint profiles.
    Example
    nsx-edge-1> get ipsecvpn config peer-endpoint UUID : 00000000-0000-0001-0000-000000000005 Auth Mode : AUTH_MODE_PSK DPD Profile : UUID : 00000000-0000-0001-0000-000000000001 Enabled : True DPD Probe Interval : 200 sec IKE Profile : UUID : 00000000-0000-0001-0000-000000000002 Authentication Algorithm : AUTH_HMAC_SHA1 Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 200 sec IKE Role : INITIATOR Ipsec Tunnel Profile : UUID : 00000000-0000-0001-0000-000000000003 AH Transport Protocol Enabled : False Authentication Algorithm : AUTH_HMAC_SHA1 DF Policy : DF_COPY Disable Anti Replay : True Enable ESN : True Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 1200 sec Transport Mode : False Peer Address : 10.112.202.167 Peer ID : peer_edp_1 Peer ID Type : IPSEC_IP_ADDR_TYPE
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config peer-endpoint <uuid>
    Display configured IPSec peer endpoint profile.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn config peer-endpoint 78b17d39-22ad-47bc-a0da-792f7e89bc46 Auth Mode : AUTH_MODE_PSK DPD Profile : UUID : 00000000-0000-0001-0000-000000000001 Enabled : True DPD Probe Interval : 200 sec IKE Profile : UUID : 00000000-0000-0001-0000-000000000002 Authentication Algorithm : AUTH_HMAC_SHA1 Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 200 sec IKE Role : INITIATOR Ipsec Tunnel Profile : UUID : 00000000-0000-0001-0000-000000000003 AH Transport Protocol Enabled : False Authentication Algorithm : AUTH_HMAC_SHA1 DF Policy : DF_COPY Disable Anti Replay : True Enable ESN : True Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 1200 sec Transport Mode : False Peer Address : 10.112.202.167 Peer ID : peer_edp_1 Peer ID Type : IPSEC_IP_ADDR_TYPE
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config session
    Display all configured IPSec VPN sessions.
    Example
    nsx-edge-1> get ipsecvpn config session UUID : 00000000-0000-0000-0000-00000000000a Enabled : True IKE Session ID : 2 Local Endpoint Profile : UUID : 00000000-0000-0000-0000-000000000004 Local Address : Ipv4 : 10.109.24.20 Local ID : 174921748 Local ID Type : IPSEC_IP_ADDR_TYPE Peer Endpoint Profile : UUID : 00000000-0000-0000-0000-000000000005 Auth Mode : AUTH_MODE_PSK DPD Profile : UUID : 00000000-0000-0001-0000-000000000001 Enabled : True DPD Probe Interval : 600 sec IKE Profile : UUID : 00000000-0000-0001-0000-000000000002 Authentication Algorithm : AUTH_HMAC_SHA1 Encryption Algorithm : ENCR_AES_128_CBC IKE Version : 3 DH Group : DH_GROUP_5 SA Expiry Time : 1000 sec IKE Role : INITIATOR Ipsec Tunnel Profile : UUID : 00000000-0000-0001-0000-000000000003 AH Transport Protocol Enabled : False Authentication Algorithm : AUTH_HMAC_SHA1 DF Policy : DF_COPY Disable Anti Replay : True Enable ESN : False Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 1200 sec Transport Mode : False Peer Address : 10.109.24.22 Peer ID : 10.109.24.22 Peer ID Type : IPSEC_IP_ADDR_TYPE Policy : UUID : 00000000-0000-0000-0000-00000000000b Action : VPN_ACTION_PROTECT Applied TO : Logical Router Port : 00000000-0000-0000-0000-00000000000c IKE Rulefrom ID : 2 IKE Ruleto ID : 1 Local Subnet : 192.168.2.0/24 Peer Subnet : 172.16.2.0/24 Priority : 10 Type : POLICY_BASED_SESSION VPN Service Profile : UUID : 00000000-0000-0001-0000-000000000007 Enable : True IKE State File Encryption PWD : XXXX SR Clustur ID : 00000000-0000-0001-0000-000000000006
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config session <uuid>
    Display a configured IPSec VPN session.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn config session 00000000-0000-0000-0000-00000000000a Enabled : True IKE Session ID : 2 Local Endpoint Profile : UUID : 00000000-0000-0000-0000-000000000004 Local Address : Ipv4 : 10.109.24.20 Local ID : 174921748 Local ID Type : IPSEC_IP_ADDR_TYPE Peer Endpoint Profile : UUID : 00000000-0000-0000-0000-000000000005 Auth Mode : AUTH_MODE_PSK DPD Profile : UUID : 00000000-0000-0001-0000-000000000001 Enabled : True DPD Probe Interval : 600 sec IKE Profile : UUID : 00000000-0000-0001-0000-000000000002 Authentication Algorithm : AUTH_HMAC_SHA1 Encryption Algorithm : ENCR_AES_128_CBC IKE Version : 3 DH Group : DH_GROUP_5 SA Expiry Time : 1000 sec IKE Role : INITIATOR Ipsec Tunnel Profile : UUID : 00000000-0000-0001-0000-000000000003 AH Transport Protocol Enabled : False Authentication Algorithm : AUTH_HMAC_SHA1 DF Policy : DF_COPY Disable Anti Replay : True Enable ESN : False Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 1200 sec Transport Mode : False Peer Address : 10.109.24.22 Peer ID : 10.109.24.22 Peer ID Type : IPSEC_IP_ADDR_TYPE Policy : UUID : 00000000-0000-0000-0000-00000000000b Action : VPN_ACTION_PROTECT Applied TO : Logical Router Port : 00000000-0000-0000-0000-00000000000c IKE Rulefrom ID : 2 IKE Ruleto ID : 1 Local Subnet : 192.168.2.0/24 Peer Subnet : 172.16.2.0/24 Priority : 10 Type : POLICY_BASED_SESSION VPN Service Profile : UUID : 00000000-0000-0001-0000-000000000007 Enable : True IKE State File Encryption PWD : XXXX SR Clustur ID : 00000000-0000-0001-0000-000000000006
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config session local-ip <ip-address> remote-ip <ip-address>
    Display a configured IPSec VPN session with specific endpoints.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get ipsecvpn config session local-ip 10.109.24.20 remote-ip 10.109.24.20 UUID : 00000000-0000-0000-0000-00000000000a Enabled : True IKE Session ID : 2 Local Endpoint Profile : UUID : 00000000-0000-0000-0000-000000000004 Local Address : Ipv4 : 10.109.24.20 Local ID : 174921748 Local ID Type : IPSEC_IP_ADDR_TYPE Peer Endpoint Profile : UUID : 00000000-0000-0000-0000-000000000005 Auth Mode : AUTH_MODE_PSK DPD Profile : UUID : 00000000-0000-0001-0000-000000000001 Enabled : True DPD Probe Interval : 600 sec IKE Profile : UUID : 00000000-0000-0001-0000-000000000002 Authentication Algorithm : AUTH_HMAC_SHA1 Encryption Algorithm : ENCR_AES_128_CBC IKE Version : 3 DH Group : DH_GROUP_5 SA Expiry Time : 1000 sec IKE Role : INITIATOR Ipsec Tunnel Profile : UUID : 00000000-0000-0001-0000-000000000003 AH Transport Protocol Enabled : False Authentication Algorithm : AUTH_HMAC_SHA1 DF Policy : DF_COPY Disable Anti Replay : True Enable ESN : False Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 1200 sec Transport Mode : False Peer Address : 10.109.24.22 Peer ID : 10.109.24.22 Peer ID Type : IPSEC_IP_ADDR_TYPE Policy : UUID : 00000000-0000-0000-0000-00000000000b Action : VPN_ACTION_PROTECT Applied TO : Logical Router Port : 00000000-0000-0000-0000-00000000000c IKE Rulefrom ID : 2 IKE Ruleto ID : 1 Local Subnet : 192.168.2.0/24 Peer Subnet : 172.16.2.0/24 Priority : 10 Type : POLICY_BASED_SESSION VPN Service Profile : UUID : 00000000-0000-0001-0000-000000000007 Enable : True IKE State File Encryption PWD : XXXX SR Clustur ID : 00000000-0000-0001-0000-000000000006
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config tunnel-profile
    Display all configured IPsec tunnel profiles.
    Example
    nsx-edge-1> get ipsecvpn config tunnel-profile UUID : 00000000-0000-0001-0000-000000000003 AH Transport Protocol Enabled : False Authentication Algorithm : AUTH_HMAC_SHA1 DF Policy : DF_COPY Disable Anti Replay : True Enable ESN : True Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 1200 sec Transport Mode : False
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn config tunnel-profile <uuid>
    Display configured IPSec tunnel profile.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn config tunnel-profile 78b17d39-22ad-47bb-a0da-792f7e89bc58 AH Transport Protocol Enabled : False Authentication Algorithm : AUTH_HMAC_SHA1 DF Policy : DF_COPY Disable Anti Replay : True Enable ESN : True Encryption Algorithm : ENCR_AES_128_CBC SA Expiry Time : 1200 sec Transport Mode : False
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn crl <uuid>
    Display complete information from a specific CRL certificate.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn crl d812f9e9-f047-4eb7-876b-3e3b88332c10 UUID : d812f9e9-f047-4eb7-876b-3e3b88332c10 Certificate Revocation List (CRL):
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn crls
    Display Issuer Name from all CRL certificates.
    Example
    nsx-edge-1> get ipsecvpn crls UUID : d812f9e9-f047-4eb7-876b-3e3b88332c10 Issuer :
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn crls verbose
    Display complete information from all CRL certificates.
    Example
    nsx-edge-1> get ipsecvpn crls verbose UUID : d812f9e9-f047-4eb7-876b-3e3b88332c10 Certificate Revocation List (CRL):
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ikesa
    Display all IKE SAs.
    Example
    nsx-edge-1> get ipsecvpn ikesa Total Number of IKE SAs: 1 IKE Version : IKEv2 IKE Status : Up IKE Session ID : 8 Session Name : Tunnel-62791cf0-7a541cb-915a6e5d-b6ed32f6 Session Type : Policy Based IKE SPI Initiator : 0x0c6a7a809f4a6e2f IKE SPI Responder : 0x33bbea1267703b12 Role : Initiator Number of Child SA Pairs : 1 Created Timestamp : 2017-12-21 07:34:58 IKE SA Uptime : 163 sec IKE SA Lifetime : 1000 sec DPD Probe Interval : 600 sec IP Address: Local : 10.109.24.20 Remote : 10.109.24.22 Identity: Local : 10.109.24.20 (ipv4) Remote : 10.109.24.22 (ipv4) Algorithm: Encryption : aes128-cbc Authentication : hmac-sha1-96 PRF : hmac-sha1 DH Group : 14 Authentication Method : Pre-shared key --------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ikesa <session-id>
    Display an IKE SA.
    Option Description
    <session-id> IKE Session ID
    Example
    nsx-edge-1> get ipsecvpn ikesa 2 Total Number of IKE SAs: 1 IKE Version : IKEv2 IKE Status : Up IKE Session ID : 2 Session Name : Tunnel-62791cf0-7a541cb-915a6e5d-b6ed32f6 Session Type : Policy Based IKE SPI Initiator : 0x0c6a7a809f4a6e2f IKE SPI Responder : 0x33bbea1267703b12 Role : Responder Number of Child SA Pairs : 1 Created Timestamp : 2017-12-27 20:49:52 IKE SA Uptime : 163 sec IKE SA Lifetime : 1000 sec DPD Probe Interval : 600 sec IP Address: Local : 10.109.24.20 Remote : 10.109.24.22 Identity: Local : 10.109.24.20 (ipv4) Remote : 10.109.24.22 (ipv4) Algorithm: Encryption : aes128-cbc Authentication : hmac-sha1-96 PRF : hmac-sha1 DH Group : 14 Authentication Method : Pre-shared key ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ikesa active
    Display all IKE security associations in active state.
    Example
    nsx-edge-1> get ipsecvpn ikesa active Total Number of Active IKE SAs: 1 IKE Version : IKEv2 IKE Status : Up IKE Session ID : 2 Session Name : Tunnel-62791cf0-7a541cb-915a6e5d-b6ed32f6 Session Type : Policy Based IKE SPI Initiator : 0x0c6a7a809f4a6e2f IKE SPI Responder : 0x33bbea1267703b12 Role : Initiator Number of Child SA Pairs : 2 Created Timestamp : 2017-09-25 03:02:45 IKE SA Uptime : 163 sec IKE SA Lifetime : 1000 sec DPD Probe Interval : 600 sec IP Address: Local : 10.112.202.147 Remote : 10.112.200.243 Identity: Local : a@ipsecvpn.com (email) Remote : b@ipsecvpn.com (email) Algorithm: Encryption : aes128-cbc Authentication : hmac-sha1-96 PRF : hmac-sha1 DH Group : 14 Authentication Method : Pre-shared key ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ikesa active <session-id>
    Display IKE security association in active state.
    Option Description
    <session-id> IKE Session ID
    Example
    nsx-edge-1> get ipsecvpn ikesa active 3 Total Number of Active IKE SAs: 1 IKE Version : IKEv2 IKE Status : Up IKE Session ID : 3 Session Name : Tunnel-62791cf0-7a541cb-915a6e5d-b6ed32f6 Session Type : Policy Based IKE SPI Initiator : 0x0c6a7a809f4a6e2f IKE SPI Responder : 0x33bbea1267703b12 Role : Initiator Number of Child SA Pairs : 2 Created Timestamp : 2017-09-25 03:02:45 IKE SA Uptime : 163 sec IKE SA Lifetime : 1000 sec DPD Probe Interval : 600 sec IP Address: Local : 10.112.202.147 Remote : 10.112.200.243 Identity: Local : a@ipsecvpn.com (email) Remote : b@ipsecvpn.com (email) Algorithm: Encryption : aes128-cbc Authentication : hmac-sha1-96 PRF : hmac-sha1 DH Group : 14 Authentication Method : Pre-shared key ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ikesa negotiating
    Display all IKE security associations in negotiating state.
    Example
    nsx-edge-1> get ipsecvpn ikesa negotiating Total Number of Negotiating IKE SAs: 1 IKE Version : IKEv2 IKE Status : Negotiating (SSH_IKEV2_STATE_IKE_INIT_SA) IKE Session ID : 2 Session Name : Tunnel-62791cf0-7a541cb-915a6e5d-b6ed32f6 Session Type : Policy Based IKE SPI Initiator : 0x0c6a7a809f4a6e2f IKE SPI Responder : 0x0 Role : Initiator Number of Child SA Pairs : 2 IKE SA Lifetime : 1000 sec DPD Probe Interval : 600 sec IP Address: Local : 10.112.202.147 Remote : 10.112.200.243 Identity: Local : Negotiating Remote : Negotiating Algorithm: Encryption : Negotiating Authentication : Negotiating PRF : Negotiating DH Group : Negotiating Authentication Method : Negotiating ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ikesa negotiating <session-id>
    Display IKE security association in negotiating state.
    Option Description
    <session-id> IKE Session ID
    Example
    nsx-edge-1> get ipsecvpn ikesa negotiating 2 Total Number of Negotiating IKE SAs: 1 IKE Version : IKEv2 IKE Status : Negotiating (SSH_IKEV2_STATE_IKE_INIT_SA) IKE Session ID : 2 Session Name : Tunnel-62791cf0-7a541cb-915a6e5d-b6ed32f6 Session Type : Policy Based IKE SPI Initiator : 0x0c6a7a809f4a6e2f IKE SPI Responder : 0x0 Role : Initiator Number of Child SA Pairs : 2 IKE SA Lifetime : 1000 sec DPD Probe Interval : 600 sec IP Address: Local : 10.112.202.147 Remote : 10.112.200.243 Identity: Local : Negotiating Remote : Negotiating Algorithm: Encryption : Negotiating Authentication : Negotiating PRF : Negotiating DH Group : Negotiating Authentication Method : Negotiating ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ipsecsa
    Display all IPSec SAs from control plane.
    Example
    nsx-edge-1> get ipsecvpn ipsecsa Total Number of IPSec SA Pairs: 1 Session ID : 2 Created Timestamp : 2018-04-10 03:58:33 Local TS : ipv4(192.168.2.0-192.168.2.255) Remote TS : ipv4(172.16.2.0-172.16.2.255) SPI In : 0xd03e65b0 SPI Out : 0xcbebe1e9 Rule ID In : 22 Rule ID Out : 2147483670 SA Uptime : 184 sec SA Lifetime : 1200 sec Local Endpoint : 10.0.0.1 Remote Endpoint: 10.1.0.1 Algorithm: aes128-cbc/hmac-sha1-96/14 NAT-T: False, ESN: False, DF-Policy: Copy Replay Window Size: 960, Role: Initiator ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ipsecsa ruleid <rule-id>
    Display IPSec SA with specific rule id from control plane.
    Option Description
    <rule-id> Rule ID
    Example
    nsx-edge-1> get ipsecvpn ipsecsa ruleid 22 Total Number of IPSec SA Pairs: 1 Session ID : 2 Created Timestamp : 2018-04-10 03:58:33 Local TS : ipv4(192.168.2.0-192.168.2.255) Remote TS : ipv4(172.16.2.0-172.16.2.255) SPI In : 0xd03e65b0 SPI Out : 0xcbebe1e9 Rule ID In : 22 Rule ID Out : 2147483670 SA Uptime : 184 sec SA Lifetime : 1200 sec Local Endpoint : 10.0.0.1 Remote Endpoint: 10.1.0.1 Algorithm: aes128-cbc/hmac-sha1-96/14 NAT-T: False, ESN: False, DF-Policy: Copy Replay Window Size: 960, Role: Initiator ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn ipsecsa sessionid <session-id>
    Display an IPSec SA with specific session id from control plane.
    Option Description
    <session-id> IKE Session ID
    Example
    nsx-edge-1> get ipsecvpn ipsecsa sessionid 2 Total Number of IPSec SA Pairs: 1 Session ID : 2 Created Timestamp : 2018-04-10 03:58:33 Local TS : ipv4(192.168.2.0-192.168.2.255) Remote TS : ipv4(172.16.2.0-172.16.2.255) SPI In : 0xd03e65b0 SPI Out : 0xcbebe1e9 Rule ID In : 22 Rule ID Out : 2147483670 SA Uptime : 184 sec SA Lifetime : 1200 sec Local Endpoint : 10.0.0.1 Remote Endpoint: 10.1.0.1 Algorithm: aes128-cbc/hmac-sha1-96/14 NAT-T: False, ESN: False, DF-Policy: Copy Replay Window Size: 960, Role: Initiator ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn policy rules
    Display all IPSec VPN policy rules.
    Example
    nsx-edge-1> get ipsecvpn policy rules UUID : 00000000-0000-0000-0000-00000000000c Rule : ID : 1 Action : RA_ENCRYPT Applied TO : Logical Router Port : 00000000-0000-0000-0000-00000000000c Component Name : CN_IKE Direction : RD_OUT From Address : IP Address : Ipv4 : 10.109.24.20 Prefix Length : 32 IS Stateful : True Keypolicy ID : 00000000-0000-0000-0000-00000000000b Lbrule : False Priority : 10 Protocol : DST Ports : Range : SRC Ports : Range : Section ID : 00000000-0000-0003-0000-000000000005 TAG : ipsec TO Address : IP Address : Ipv4 : 10.109.24.22 Prefix Length : 32 Type : RT_LAYER3 Uuid : 00000000-0000-0000-0000-00000000000c UUID : 00000000-0000-0000-0000-00000000000d Rule : ID : 1 Action : RA_ENCRYPT Applied TO : Logical Router Port : 00000000-0000-0000-0000-00000000000c Component Name : CN_IKE Direction : RD_IN From Address : IP Address : Ipv4 : 10.109.24.22 Prefix Length : 32 IS Stateful : True Keypolicy ID : 00000000-0000-0000-0000-00000000000b Lbrule : False Priority : 10 Protocol : DST Ports : Range : SRC Ports : Range : Section ID : 00000000-0000-0003-0000-000000000005 TAG : ipsec TO Address : IP Address : Ipv4 : 10.109.24.20 Prefix Length : 32 Type : RT_LAYER3 Uuid : 00000000-0000-0000-0000-00000000000d
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn policy rules <uuid>
    Display an IPSec policy rule.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn policy rules 00000000-0000-0000-0000-00000000000c Rule : ID : 1 Action : RA_ENCRYPT Applied TO : Logical Router Port : 00000000-0000-0000-0000-00000000000c Component Name : CN_IKE Direction : RD_OUT From Address : IP Address : Ipv4 : 10.109.24.20 Prefix Length : 32 IS Stateful : True Keypolicy ID : 00000000-0000-0000-0000-00000000000b Lbrule : False Priority : 10 Protocol : DST Ports : Range : SRC Ports : Range : Section ID : 00000000-0000-0003-0000-000000000005 TAG : ipsec TO Address : IP Address : Ipv4 : 10.109.24.22 Prefix Length : 32 Type : RT_LAYER3 Uuid : 00000000-0000-0000-0000-00000000000c
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn policy summary
    Display summary of IPSec VPN policy rules.
    Example
    nsx-edge-1>get ipsecvpn policy summary IPSec Security Policy count: 4 RuleId Dir Local Subnet Peer Subnet Action UUID -------------------------------------------------------------------------------------------------------------- 1027 Out 192.168.100.0/24 2.2.5.0/24 Encrypt 00003400-0000-0402-0000-040300000000 2147484675 In 2.2.5.0/24 192.168.100.0/24 Encrypt 00003400-0000-0402-8000-040300000000 1032 Out 192.168.100.1/32 2.2.5.1/32 Bypass 00003400-0000-0407-0000-040800000000 2147484680 In 2.2.5.1/32 192.168.100.1/32 Bypass 00003400-0000-0407-8000-040800000000 --------------------------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn sad
    Display all IPSec SAs present in Security Association Database(datapath).
    Example
    nsx-edge-1> get ipsecvpn sad Total Number of IPSec SAs: 2 Inbound SAs: Rule ID : 2147484675 VRF ID : 1 SPI : 0xf835f82a Created Timestamp : 2018-03-19 10:24:21 SA Uptime : 496 sec SA Lifetime : 3600 sec NAT-Traversal : False ESN : False DF Policy : clear SA Hit : 1 Sequence Number (Recv) : 1234 Replay Window Size : 960 Traffic Mode : Tunnel Protocol : ESP IP Address: Source : 1.1.5.100 Destination : 192.168.128.1 Subnets: Local : 2.2.5.0/24 Peer : 192.168.100.0/24 Algorithm: Encryption : aes-128-cbc Authentication : sha1-hmac ---------------------------------------- Outbound SAs: Rule ID : 1027 VRF ID : 1 SPI : 0xc3f194fa Created Timestamp : 2018-03-19 10:24:21 SA Uptime : 496 sec SA Lifetime : 3600 sec NAT-Traversal : False ESN : False DF Policy : clear SA Hit : 1 Sequence Number (Sent) : 1234 Replay Window Size : 960 Traffic Mode : Tunnel Protocol : ESP IP Address: Source : 192.168.128.1 Destination : 1.1.5.100 Subnets: Local : 192.168.100.0/24 Peer : 2.2.5.0/24 Algorithm: Encryption : aes-128-cbc Authentication : sha1-hmac ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn sad <uuid>
    Display IPSec SA present in Security Association Database(datapath).
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn sad 00003400-0000-0402-0000-040300000000 Total Number of IPSec SAs: 2 Inbound SAs: Rule ID : 2147484675 VRF ID : 1 SPI : 0xf835f82a Created Timestamp : 2018-03-19 10:24:21 SA Uptime : 496 sec SA Lifetime : 3600 sec NAT-Traversal : False ESN : False DF Policy : clear SA Hit : 1 Sequence Number (Recv) : 1234 Replay Window Size : 960 Traffic Mode : Tunnel Protocol : ESP IP Address: Source : 1.1.5.100 Destination : 192.168.128.1 Subnets: Local : 2.2.5.0/24 Peer : 192.168.100.0/24 Algorithm: Encryption : aes-128-cbc Authentication : sha1-hmac ---------------------------------------- Outbound SAs: Rule ID : 1027 VRF ID : 1 SPI : 0xc3f194fa Created Timestamp : 2018-03-19 10:24:21 SA Uptime : 496 sec SA Lifetime : 3600 sec NAT-Traversal : False ESN : False DF Policy : clear SA Hit : 1 Sequence Number (Sent) : 1234 Replay Window Size : 960 Traffic Mode : Tunnel Protocol : ESP IP Address: Source : 192.168.128.1 Destination : 1.1.5.100 Subnets: Local : 192.168.100.0/24 Peer : 2.2.5.0/24 Algorithm: Encryption : aes-128-cbc Authentication : sha1-hmac ----------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session
    Display all IPSec VPN sessions.
    Example
    nsx-edge-1>get ipsecvpn session Total Number of Sessions: 3 IKE Session ID : 3 UUID : 254d755e-e133-4831-89ab-41ef49c2bdc1 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.102 Local ID : 192.168.128.1 Peer ID : 1.1.5.102 Session Status : Down Down Reason : Timed out Policy Rules Policy UUID : 00003400-0000-0404-0000-040500000000 ToRule ID : 1029 ToRule ID : 2147484677 Local Subnet : 192.170.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Down Down Reason : IKE SA down ------------------------------------------------------------------------------------------ IKE Session ID : 2 UUID : ffc00327-0d7b-4e4d-8676-3eb12c803ed6 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.100 Local ID : 192.168.128.1 Peer ID : 1.1.5.100 Session Status : Up Policy Rules Policy UUID : 00003400-0000-0402-0000-040300000000 ToRule ID : 1027 FromRule ID : 2147484675 Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Up ------------------------------------------------------------------------------------------ IKE Session ID : 4 UUID : aa2bcd92-35e0-4c99-a591-19b74c040cfd Type : Policy Auth Mode : Cert Local IP : 192.168.128.1 Peer IP : 1.1.5.101 Local ID : 192.168.128.1 Peer ID : C=IN, ST=Maharashtra, L=Pune, O=VMware, OU=NSBU, CN=VMwareSite2 Session Status : Up Policy Rules Policy UUID : 00003400-0000-048e-0000-048f00000000 ToRule ID : 1167 FromRule ID : 2147484815 Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.6.0/24 Tunnel Status : Up ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session <uuid>
    Display specific IPSec VPN session.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1>get ipsecvpn session ffc00327-0d7b-4e4d-8676-3eb12c803ed6 Total Number of Sessions: 1 IKE Session ID : 2 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.100 Local ID : 192.168.128.1 Peer ID : 1.1.5.100 Session Status : Up Policy Rules Policy UUID : 00003400-0000-0402-0000-040300000000 ToRule ID : 1027 FromRule ID : 2147484675 Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Up ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session active
    Display all IPSec VPN sessions in active state.
    Example
    nsx-edge-1> get ipsecvpn session active Total Number of Active Sessions: 1 IKE Session ID : 2 UUID : ffc00327-0d7b-4e4d-8676-3eb12c803ed6 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.100 Local ID : 192.168.128.1 Peer ID : 1.1.5.100 Session Status : Up Policy Rules Policy UUID : 00003400-0000-0402-0000-040300000000 ToRule ID : 1027 FromRule ID : 2147484675 Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Up ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session active <uuid>
    Display an IPSec VPN session in active state.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn session active ffc00327-0d7b-4e4d-8676-3eb12c803ed6 Total Number of Active Sessions: 1 IKE Session ID : 2 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.100 Local ID : 192.168.128.1 Peer ID : 1.1.5.100 Session Status : Up Policy Rules Policy UUID : 00003400-0000-0402-0000-040300000000 ToRule ID : 1027 FromRule ID : 2147484675 Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Up ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session active local-ip <ip-address> remote-ip <ip-address>
    Display IPSec VPN session in active state for specific endpoints.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get ipsecvpn session active local-ip 192.168.128.1 remote-ip 1.1.5.100 Total Number of Active Sessions: 1 IKE Session ID : 2 UUID : ffc00327-0d7b-4e4d-8676-3eb12c803ed6 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.100 Local ID : 192.168.128.1 Peer ID : 1.1.5.100 Session Status : Up Policy Rules Policy UUID : 00003400-0000-0402-0000-040300000000 ToRule ID : 1027 FromRule ID : 2147484675 Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Up ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session active sessionid <session-id>
    Display an IPSec VPN session in active state.
    Option Description
    <session-id> IKE Session ID
    Example
    nsx-edge-1> get ipsecvpn session active sessionid 2 Total Number of Sessions: 1 IKE Session ID : 2 UUID : ffc00327-0d7b-4e4d-8676-3eb12c803ed6 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.100 Local ID : 192.168.128.1 Peer ID : 1.1.5.100 Session Status : Up Policy Rules Policy UUID : 00003400-0000-0402-0000-040300000000 ToRule ID : 1027 FromRule ID : 2147484675 Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Up ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session down
    Display all IPsec VPN sessions in down state.
    Example
    nsx-edge-1> get ipsecvpn session down Total Number of Down Sessions: 1 IKE Session ID : 3 UUID : 254d755e-e133-4831-89ab-41ef49c2bdc1 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.102 Local ID : 192.168.128.1 Peer ID : 1.1.5.102 Session Status : Down Down Reason : No proposal chosen Policy Rules Policy UUID : 00003400-0000-0404-0000-040500000000 ToRule ID : 1027 FromRule ID : 2147484677 Local Subnet : 192.170.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Down Down Reason : IKE SA Down ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session down <uuid>
    Display an IPsec VPN session in down state.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn session down 254d755e-e133-4831-89ab-41ef49c2bdc1 Total Number of Down Sessions: 1 IKE Session ID : 3 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.102 Local ID : 192.168.128.1 Peer ID : 1.1.5.102 Session Status : Down Down Reason : Timed out Policy Rules Policy UUID : 00003400-0000-0404-0000-040500000000 ToRule ID : 1027 FromRuleId : 2147484677 Local Subnet : 192.170.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Down Down Reason : IKE SA Down ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session down local-ip <ip-address> remote-ip <ip-address>
    Display IPsec VPN session in down state for specific endpoints.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get ipsecvpn session down local-ip 192.168.128.1 remote-ip 1.1.5.102 Total Number of Down Sessions: 1 IKE Session ID : 3 UUID : 254d755e-e133-4831-89ab-41ef49c2bdc1 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.102 Local ID : 192.168.128.1 Peer ID : 1.1.5.102 Session Status : Down Down Reason : Timed out Policy Rules Policy UUID : 00003400-0000-0404-0000-040500000000 ToRule ID : 1027 Rule ID FromRule ID : 2147484677 Local Subnet : 192.170.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Down Down Reason : IKE SA Down ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session down sessionid <session-id>
    Display an IPsec VPN session in down state.
    Option Description
    <session-id> IKE Session ID
    Example
    nsx-edge-1> get ipsecvpn session down sessionid 3 Total Number of Down Sessions: 1 IKE Session ID : 3 UUID : 254d755e-e133-4831-89ab-41ef49c2bdc1 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.102 Local ID : 192.168.128.1 Peer ID : 1.1.5.102 Session Status : Down Down Reason : Timed out Policy Rules Policy UUID : 00003400-0000-0404-0000-040500000000 ToRule ID : 1029 FromRule ID : 2147484677 Local Subnet : 192.170.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Down Down Reason : IKE SA Down ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session local-ip <ip-address> remote-ip <ip-address>
    Display IPSec VPN session for specific endpoints.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1>get ipsecvpn session local-ip 192.168.128.1 remote-ip 1.1.5.101 Total Number of Sessions: 1 IKE Session ID : 2 UUID : ffc00327-0d7b-4e4d-8676-3eb12c803ed6 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.100 Local ID : 192.168.128.1 Peer ID : 1.1.5.100 Session Status : Up Policy Rules Policy UUID : 00003400-0000-0402-0000-040300000000 ToRule ID : 1027 FromRule ID : 2147484675 Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Up ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session negotiating
    Display all IPsec VPN sessions in negotiating state.
    Example
    nsx-edge-1> get ipsecvpn session negotiating Total Number of Negotiating Sessions: 1 IKE Session ID : 3 UUID : 254d755e-e133-4831-89ab-41ef49c2bdc1 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.102 Local ID : 192.168.128.1 Peer ID : 1.1.5.102 Session Status : Negotiating Last Known Failure: Peer not reachable Policy Rules Policy UUID : 00003400-0000-0404-0000-040500000000 ToRule ID : 1027 FromRule ID : 2147484677 Local Subnet : 192.170.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Down Down Reason : IKE SA Down ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session negotiating <uuid>
    Display an IPsec VPN session in negotiating state.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn session negotiating 254d755e-e133-4831-89ab-41ef49c2bdc1 Total Number of Negotiating Sessions: 1 IKE Session ID : 3 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.102 Local ID : 192.168.128.1 Peer ID : 1.1.5.102 Session Status : Negotiating Last Known Failure: Peer not reachable Policy Rules Policy UUID : 00003400-0000-0404-0000-040500000000 ToRule ID : 1027 FromRule ID : 2147484677 Local Subnet : 192.170.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Down Down Reason : IKE SA Down ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session negotiating local-ip <ip-address> remote-ip <ip-address>
    Display IPsec VPN session in negotiating state for specific endpoints.
    Option Description
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get ipsecvpn session negotiating local-ip 192.168.128.1 remote-ip 1.1.5.102 Total Number of Negotiating Sessions: 1 IKE Session ID : 3 UUID : 254d755e-e133-4831-89ab-41ef49c2bdc1 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.102 Local ID : 192.168.128.1 Peer ID : 1.1.5.102 Session Status : Negotiating Last Known Failure: Peer not reachable Policy Rules Policy UUID : 00003400-0000-0404-0000-040500000000 ToRule ID : 1027 FromRule ID :2147484677 Local Subnet : 192.170.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Down Down Reason : IKE SA Down ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session negotiating sessionid <session-id>
    Display an IPsec VPN session in negotiating state.
    Option Description
    <session-id> IKE Session ID
    Example
    nsx-edge-1> get ipsecvpn session negotiating sessionid 3 Total Number of Negotiating Sessions: 1 IKE Session ID : 3 UUID : 254d755e-e133-4831-89ab-41ef49c2bdc1 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.102 Local ID : 192.168.128.1 Peer ID : 1.1.5.102 Session Status : Negotiating Last Known Failure: Peer not reachable Policy Rules Policy UUID : 00003400-0000-0404-0000-040500000000 ToRule ID : 1029 FromRule ID : 2147484677 Local Subnet : 192.170.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Down Down Reason : IKE SA Down ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session sessionid <session-id>
    Display all IPSec VPN sessions.
    Option Description
    <session-id> IKE Session ID
    Example
    nsx-edge-1>get ipsecvpn session sessionid 2 Total Number of Sessions: 1 IKE Session ID : 2 UUID : ffc00327-0d7b-4e4d-8676-3eb12c803ed6 Type : Policy Auth Mode : PSK Local IP : 192.168.128.1 Peer IP : 1.1.5.100 Local ID : 192.168.128.1 Peer ID : 1.1.5.100 Session Status : Up Policy Rules Policy UUID : 00003400-0000-0402-0000-040300000000 ToRule ID : 1027 FromRule ID : 2147484675 Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Tunnel Status : Up ------------------------------------------------------------------------------------------
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session status
    Display IPSec VPN session status.
    Example
    nsx-edge-1> get ipsecvpn session status VPN Session Status Total Configured Sessions : 2 Total UP Sessions : 1 Total Down Sessions : 1 Total Negotiating Sessions : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn session summary
    Display summary of all IPSec VPN sessions.
    Example
    nsx-edge-1>get ipsecvpn session summary Version SID Type Auth Status Local IP Peer IP Down Reason ------------------------------------------------------------------------------------------ IKEv2 4 Policy PSK Down 192.168.128.1 1.1.5.102 Peer not reachable IKEv2 3 Policy PSK Down 192.168.128.1 1.1.5.101 No proposal chosen IKEv1 2 Policy PSK Negotiating 192.168.128.1 1.1.5.100 Peer not reachable* ------------------------------------------------------------------------------------------ SID: Session ID *: Last Known Failure
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn tunnel stats
    Display all IPSec SA tunnel statistics.
    Example
    nsx-edge-1> get ipsecvpn tunnel stats Interface UID : 294 Interface UUID : 00003400-0000-0402-0000-040300000000 Policy UUID : 00003400-0000-0402-0000-040300000000 Policy Rule Information Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Outbound Rule ID : 1027 Inbound Rule ID : 2147484675 Action : RA_ENCRYPT Stats Rx Pkts : 5 Tx Pkts : 5 Rx Bytes : 420 Tx Bytes : 420 Rx Drops : 0 Tx Drops : 0 Rx Drop Crypto Failure : 0 Tx Drop Crypto Failure : 0 Rx Drop State Mismatch : 0 Tx Drop State Mismatch : 0 Rx Drop Malformed : 0 Tx Drop Malformed : 0 Rx Drop Proto Not Supported : 0 Tx Drop Proto Not Supported : 0 Rx Drop Replay : 0 Tx Drop Seq Rollover : 0 Rx Drop Inner Malformed : 0 Rekey Request Failure : 0 Rx Drop Policy Nomatch : 0 Rx Drop Auth Failure : 0 Interface UID : 295 Interface UUID : 00003400-0000-0404-0000-040500000000 Policy UUID : 00003400-0000-0404-0000-040500000000 Policy Rule Information Local Subnet : 192.168.200.0/24 Peer Subnet : 2.2.6.0/24 Outbound Rule ID : 1031 Inbound Rule ID : 2147484679 Action : RA_ENCRYPT Stats Rx Pkts : 0 Tx Pkts : 0 Rx Bytes : 0 Tx Bytes : 0 Rx Drops : 0 Tx Drops : 0 Rx Drop Crypto Failure : 0 Tx Drop Crypto Failure : 0 Rx Drop State Mismatch : 0 Tx Drop State Mismatch : 0 Rx Drop Malformed : 0 Tx Drop Malformed : 0 Rx Drop Proto Not Supported : 0 Tx Drop Proto Not Supported : 0 Rx Drop Replay : 0 Tx Drop Seq Rollover : 0 Rx Drop Inner Malformed : 0 Rekey Request Failure : 0 Rx Drop Policy Nomatch : 0 Rx Drop Auth Failure : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn tunnel stats <keypolicy-id>
    Display IPSec SA tunnel statistics.
    Option Description
    <keypolicy-id> Keypolicy ID for the rule
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn tunnel stats 00003400-0000-0402-0000-040300000000 Interface UID : 294 Interface UUID : 00003400-0000-0402-0000-040300000000 Policy UUID : 00003400-0000-0402-0000-040300000000 Policy Rule Information Local Subnet : 192.168.100.0/24 Peer Subnet : 2.2.5.0/24 Outbound Rule ID : 1027 Inbound Rule ID : 2147484675 Action : RA_ENCRYPT Stats Rx Pkts : 5 Tx Pkts : 5 Rx Bytes : 420 Tx Bytes : 420 Rx Drops : 0 Tx Drops : 0 Rx Drop Crypto Failure : 0 Tx Drop Crypto Failure : 0 Rx Drop State Mismatch : 0 Tx Drop State Mismatch : 0 Rx Drop Malformed : 0 Tx Drop Malformed : 0 Rx Drop Proto Not Supported : 0 Tx Drop Proto Not Supported : 0 Rx Drop Replay : 0 Tx Drop Seq Rollover : 0 Rx Drop Inner Malformed : 0 Rekey Request Failure : 0 Rx Drop Policy Nomatch : 0 Rx Drop Auth Failure : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn vti rules
    Displays all IPSec VPN Policy Rules.
    Example
    nsx-edge-1> get ipsecvpn vti rules 00000000-0000-0000-0000-00000000000c UUID : 00000000-0000-0000-0000-00000000000c KEY Policyid : 00000000-0000-0000-0000-00000000000b
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ipsecvpn vti rules <uuid>
    Display an IPSec VPN VTI rule.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get ipsecvpn vti rules 00000000-0000-0000-0000-00000000000c KEY Policyid : 00000000-0000-0000-0000-00000000000b
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2bridge-port <uuid>
    Display information about specified L2 bridge port.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get l2bridge-port a70600a9-eda8-499f-96d0-1262dc36f4a1 Bridge Port UUID : a70600a9-eda8-499f-96d0-1262dc36f4a1 Logical Switch : f322ca3a-a218-5d65-85c1-20ef6adea670 VLAN ID : 10 State : 1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2bridge-port <uuid> flush-stats
    Display information about specified L2 bridge port and mac flush stats.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get l2bridge-port a70600a9-eda8-499f-96d0-1262dc36f4a1 flush-stats Bridge Port UUID : a70600a9-eda8-499f-96d0-1262dc36f4a1 Last Flush : 2018-03-03 01:40:22.319 Flush Count : 2 Last Rarp : 2018-03-03 01:40:20.319 Rarp count : 3
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2bridge-port-config <uuid>
    Display configuration and states of a specific L2 bridge
    Option Description
    <uuid> UUID argument
    Example
    nsx-edge-1> get l2bridge-port-config 76c85110-b041-4e9f-a3e3-b54179a88ceb Bridge UUID : 3ee1f7bd-eff3-523c-8bfe-1aba1c603cc6 Rank : 0 Failover Mode : Non-preemptive Bridge Port UUID : 76c85110-b041-4e9f-a3e3-b54179a88ceb Bridge Port State : Forwarding Transport Zone : d7ea327f-2569-4b1c-b7cf-8cd4c85ebb18 VLAN ID : 10
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2bridge-ports
    Display information about all L2 bridge ports.
    Example
    nsx-edge-1> get l2bridge-ports Bridge Port UUID : a70600a9-eda8-499f-96d0-1262dc36f4a1 Logical Switch : f322ca3a-a218-5d65-85c1-20ef6adea670 VLAN ID : 10 State : 1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2bridge-ports-config
    Display configuration and states of all L2 bridges
    Example
    nsx-edge-1> get l2bridge-ports-config Bridge UUID : 3ee1f7bd-eff3-523c-8bfe-1aba1c603cc6 Rank : 0 Failover Mode : Preemptive Bridge Port UUID : 76c85110-b041-4e9f-a3e3-b54179a88ceb Bridge Port State : Stopped Transport Zone : d7ea327f-2569-4b1c-b7cf-8cd4c85ebb18 VLAN ID : 10
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn service <uuid> sessions config
    Display L2VPN sessions configuration for a given L2VPN service.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsxedge-ob-7490391-1-new> get l2vpn service 1d5bb34a-0480-45e4-1d5b-b34a048046b6 sessions config DISPLAY_NAME: l2vpn_session1 ENABLED: True ID: 1d5bb34a-0480-45e2-a261-bd5f98c24d36 L2VPN_SERVICE_ID: 1d5bb34a-0480-45e4-1d5b-b34a048046b6 MTU: 1500 TUNNEL_ENCAPSULATION: LOCAL_ENDPOINT_IP: IPV4: 1.1.1.2 PEER_ENDPOINT_IP: IPV4: 1.1.1.3 PROTOCOL: GRE VTI: 1d5bb34a-0480-45e3-a261-bd5f98c24d37
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn services config
    Display all L2VPN services configuration.
    Example
    nsxedge-ob-7490391-1-new> get l2vpn services config ENABLE_FULL_MESH: True ID: 1d5bb34a-0480-46aa-a261-bd5f98c24b9c SR_CLUSTER_ID: a261bd5f-98c2-4d37-1d5b-b34a048045e3
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn session <uuid> logical-switch <uuid>
    Display stretched logical switch behind L2VPN session.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get l2vpn session 2ds29c11-8920-29q1-1029-2lk20129d910 logical-switch ea8c4460-6d15-49c5-a82e-6812a26b4200 Tunnel-Port : fe34062b-7ad3-5bca-beb8-1adde6c0d46e Logical-switch: ea8c4460-6d15-49c5-a82e-6812a26b4200 VNI : 1 Tunnel ID : 10
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn session <uuid> logical-switch <uuid> remote-macs
    Display remote macs learnt on L2VPN stretched logical-switch.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get l2vpn session 2ds29c11-8920-29q1-1029-2lk20129d910 logical-switch ea8c4460-6d15-49c5-a82e-6812a26b4200 remote-macs MACs: 04:00:c0:a8:fa:a2 02:50:56:56:44:52 00:50:56:8e:1b:21 00:50:56:8e:9a:a5
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn session <uuid> logical-switch <uuid> stats
    Display stats for stretched logical-switch behind L2VPN session.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get l2vpn session 2ds29c11-8920-29q1-1029-2lk20129d910 logical-switch ea8c4460-6d15-49c5-a82e-6812a26b4200 stats RX-Packets : 4474 RX-Bytes : 302966 RX-Drops : 0 Malformed : 0 No-Match : 0 L2-Loop : 0 TX-Packets : 5527 TX-Bytes : 371568 TX-Drops : 0 No-Memory : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn session <uuid> logical-switches
    Display stretched logical switches behind given L2VPN session.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get l2vpn session 2ds29c11-8920-29q1-1029-2lk20129d910 logical-switches Tunnel-Port : fe34062b-7ad3-5bca-beb8-1adde6c0d46e Logical-switch: 6aeaf0a7-110d-4d9d-bd76-b17032b36746 VNI : 60297 Tunnel ID : 1000 Logical-switch: 9cac13e9-eb71-4ce4-870e-ccc1dc8d6c3f VNI : 60296 Tunnel ID : 2000
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn session <uuid> stats
    Display stats for L2VPN session
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get l2vpn session 1d5bb34a-0480-45e2-a261-bd5f98c24d36 stats Session : 1d5bb34a-0480-45e2-a261-bd5f98c24d36 Tunnel : d87cd7e0-eb91-5dd5-bae4-ceb0a2760bfa Local IP : 192.168.10.2 Remote IP : 192.168.10.20 Status : UP RX-Packets : 0 RX-Bytes : 0 RX-Drops : 0 Malformed : 0 No-Match : 0 L2-Loop : 0 TX-Packets : 3325 TX-Bytes : 412300 TX-Drops : 0 No-Memory : 0 No-Route : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn session <uuid> status
    Display status of specific L2VPN session.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get l2vpn session 2ds29c11-8920-29q1-1029-2lk20129d910 status Session : 2ds29c11-8920-29q1-1029-2lk20129d910 Tunnel : 6598ab27-95c6-50ef-85b3-89b7811ab672 Status : UP
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn sessions
    Display all L2VPN sessions information.
    Example
    nsx-edge-1> get l2vpn sessions Session : 1d5bb34a-0480-45e2-a261-bd5f98c24d36 Tunnel : d87cd7e0-eb91-5dd5-bae4-ceb0a2760bfa Status : UP Session : 2ds29c11-8920-29q1-1029-2lk20129d910 Tunnel : 6598ab27-95c6-50ef-85b3-89b7811ab672 Status : UP
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn sessions config
    Display all L2VPN sessions configuration.
    Example
    nsxedge-ob-7490391-1-new> get l2vpn sessions config DISPLAY_NAME: l2vpn_session1 ENABLED: True ID: 1d5bb34a-0480-45e2-a261-bd5f98c24d36 L2VPN_SERVICE_ID: 1d5bb34a-0480-45e4-1d5b-b34a048046b6 MTU: 1500 TUNNEL_ENCAPSULATION: LOCAL_ENDPOINT_IP: IPV4: 1.1.1.2 PEER_ENDPOINT_IP: IPV4: 1.1.1.3 PROTOCOL: GRE VTI: 1d5bb34a-0480-45e3-a261-bd5f98c24d37
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get l2vpn sessions stats
    Display L2VPN sessions stats
    Example
    nsx-edge-1> get l2vpn sessions stats Session : 1d5bb34a-0480-45e2-a261-bd5f98c24d36 Tunnel : d87cd7e0-eb91-5dd5-bae4-ceb0a2760bfa Local IP : 192.168.10.2 Remote IP : 192.168.10.20 Status : UP RX-Packets : 0 RX-Bytes : 0 RX-Drops : 0 Malformed : 0 No-Match : 0 L2-Loop : 0 TX-Packets : 3325 TX-Bytes : 412300 TX-Drops : 0 No-Memory : 0 No-Route : 0 Session : 2ds29c11-8920-29q1-1029-2lk20129d910 Tunnel : 6598ab27-95c6-50ef-85b3-89b7811ab672 Local IP : 192.168.9.2 Remote IP : 192.168.9.20 Status : UP RX-Packets : 0 RX-Bytes : 0 RX-Drops : 0 Malformed : 0 No-Match : 0 L2-Loop : 0 TX-Packets : 3331 TX-Bytes : 413044 TX-Drops : 0 No-Memory : 0 No-Route : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get last processed barrier <uuid>
    Get the last barrier processed by NestDb Pigeon for the specified transport node.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get last processed barrier 7c72c4ae-8fe8-4449-a4e2-c5e53ab0bb4f 1191
    Mode
    Basic
    Availability
    Controller

    get lldp config
    Display LLDP configuration on all devices.
    Example
    KVM-TN-02> get lldp config Device Name : eth0 Tx : disabled Rx : enabled Tx Interval : NA Device Name : eth1 Tx : disabled Rx : enabled Tx Interval : NA Device Name : eth2 Tx : disabled Rx : enabled Tx Interval : NA Device Name : hyperbus Tx : disabled Rx : enabled Tx Interval : NA
    Mode
    Basic
    Availability
    KVM

    get lldp config
    Display LLDP configuration on all devices.
    Example
    prme-vmkqa-net3002-dhcp133.eng.vmware.com> get lldp config Device Name : vmnic1 Tx : disabled Rx : enabled Tx Interval : NA
    Mode
    Basic
    Availability
    ESXi

    get lldp config
    Displays LLDP configuration on all devices.
    Example
    nsx-edge-1> get lldp config Device Name : eth0 Tx : enabled Rx : enabled Tx Interval : 30 Device Name : eth1 Tx : disabled Rx : enabled Tx Interval : 30
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get lldp config <interface-name>
    Display LLDP configuration on given device.
    Option Description
    <interface-name> LLDP interface argument
    Example
    prme-vmkqa-net3002-dhcp133.eng.vmware.com> get lldp config vmnic1 Device Name : vmnic1 Tx : disabled Rx : enabled Tx Interval : NA
    Mode
    Basic
    Availability
    ESXi

    get lldp config <interface-name>
    Display LLDP configuration on given device.
    Option Description
    <interface-name> LLDP interface argument
    Example
    KVM-TN-02> get lldp config eth0 Device Name : eth0 Tx : enabled Rx : enabled Tx Interval : 30
    Mode
    Basic
    Availability
    KVM

    get lldp config <interface-name>
    Displays LLDP configuration given device.
    Option Description
    <interface-name> LLDP interface argument
    Example
    nsx-edge-1> get lldp config eth0 Device Name : eth0 Tx : enabled Rx : enabled Tx Interval : 30
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get lldp neighbors
    Displays LLDP Neighbor information on all devices.
    Example
    nsx-edge-1> get lldp neighbors Device : eth0 Neighbor Count : 1 Neighbors Neighbor : eth0/0:50:56:b7:7f:47 Life Time : 111 System Name : NSX ESG System Desc : NSX Edge Services Gateway System Cap : ['Router'] Enabled Cap : ['Router'] Chassis Id : eth0 Port Id : 0:50:56:b7:7f:47 Port Desc : management iface Mgmt Address Address : 10.172.139.51 Addr Family : IPv4 Iface Number : 2 Iface Type : 2 MAC PHY Status AutoNeg : supported AutoNeg Status: enabled PMDAutoNeg : supported PMDAutoNeg Status: not-enabled MAU Type : 16 Power via MDI Port Class : PSE Power Source : supported PSE MDI State : enabled PSE Pair Ctrl : yes PSE Pair : 1 PSE Class : 2 Link Aggregation Aggr Capability: yes Aggr Status : enabled Aggr Port Id : 1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get lldp neighbors
    Display LLDP Neighbor information on all devices.
    Example
    prme-vmkqa-net3002-dhcp133.eng.vmware.com> get lldp neighbors ============================================================ Device : vmnic1 Neighbor Count : 1 Neighbors Chassis Id : 00:1a:a1:84:fb:ff Port Id : Gi1/3 TTL : 93 Port Description : GigabitEthernet1/3 System Name : prme-vmkqa-4948c.eng.vmware.com System Description : unknown Enabled Capabilities : Router, TransparentBridge Management Address : 10.115.160.146 Organizationally Specific TLVs: Vlan ID : 16
    Mode
    Basic
    Availability
    ESXi

    get lldp neighbors
    Display LLDP Neighbor information on all devices.
    Example
    KVM-TN-02> get lldp neighbors ============================================================ Device : eth0 Neighbor Count : 0 ============================================================ Device : eth1 Neighbor Count : 1 Neighbors Chassis Id : eth1 Port Id : 00:50:56:ab:6c:6e Port Description : driver_name: e1000e, driver_version: 3.2.6-k, firmware_version: 1.8-0 System Description : x86_64 #1 SMP Sun Jan 14 10:36:03 EST 2018 Enabled Capabilities : Bridge Management Address: Management Address : ::80fe:0:2a7:9ad6:300:0 ifIndex : 3 Organizationally Specific TLVs: Maximum Frame Size : 161 ============================================================ Device : eth2 Neighbor Count : 1 Neighbors Chassis Id : eth2 Port Id : 00:50:56:ab:f6:3c Port Description : driver_name: e1000e, driver_version: 3.2.6-k, firmware_version: 1.8-0 System Description : x86_64 #1 SMP Sun Jan 14 10:36:03 EST 2018 Enabled Capabilities : Bridge Management Address: Management Address : ::80fe:0:2a7:9ad6:400:0 ifIndex : 4 Organizationally Specific TLVs: Maximum Frame Size : 151 ============================================================ Device : hyperbus Neighbor Count : 0
    Mode
    Basic
    Availability
    KVM

    get lldp neighbors <interface-name>
    Display LLDP Neighbor information on given device.
    Option Description
    <interface-name> LLDP interface argument
    Example
    KVM-TN-02> get lldp neighbors eth1 ============================================================ Device : eth1 Neighbor Count : 1 Neighbors Chassis Id : eth1 Port Id : 00:50:56:ab:6c:6e Port Description : driver_name: e1000e, driver_version: 3.2.6-k, firmware_version: 1.8-0 System Description : x86_64 #1 SMP Sun Jan 14 10:36:03 EST 2018 Enabled Capabilities : Bridge Management Address: Management Address : ::80fe:0:2a7:9ad6:300:0 ifIndex : 3 Organizationally Specific TLVs: Maximum Frame Size : 161
    Mode
    Basic
    Availability
    KVM

    get lldp neighbors <interface-name>
    Display LLDP Neighbor information on given device.
    Option Description
    <interface-name> LLDP interface argument
    Example
    prme-vmkqa-net3002-dhcp133.eng.vmware.com> get lldp neighbors vmnic1 ============================================================ Device : vmnic1 Neighbor Count : 1 Neighbors Chassis Id : 00:1a:a1:84:fb:ff Port Id : Gi1/3 TTL : 103 Port Description : GigabitEthernet1/3 System Name : prme-vmkqa-4948c.eng.vmware.com System Description : unknown Enabled Capabilities : Router, TransparentBridge Management Address : 10.115.160.146 Organizationally Specific TLVs: Vlan ID : 16
    Mode
    Basic
    Availability
    ESXi

    get lldp neighbors <interface-name>
    Displays LLDP Neighbor information on given device.
    Option Description
    <interface-name> LLDP interface argument
    Example
    nsx-edge-1> get lldp neighbors eth0 Device : eth0 Neighbor Count : 1 Neighbors Neighbor : eth0/0:50:56:b7:7f:47 Life Time : 111 System Name : NSX ESG System Desc : NSX Edge Services Gateway System Cap : ['Router'] Enabled Cap : ['Router'] Chassis Id : eth0 Port Id : 0:50:56:b7:7f:47 Port Desc : management iface Mgmt Address Address : 10.172.139.51 Addr Family : IPv4 Iface Number : 2 Iface Type : 2 MAC PHY Status AutoNeg : supported AutoNeg Status: enabled PMDAutoNeg : supported PMDAutoNeg Status: not-enabled MAU Type : 16 Power via MDI Port Class : PSE Power Source : supported PSE MDI State : enabled PSE Pair Ctrl : yes PSE Pair : 1 PSE Class : 2 Link Aggregation Aggr Capability: yes Aggr Status : enabled Aggr Port Id : 1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get lldp stats
    Displays LLDP Statistics on all devices.
    Example
    nsx-edge-1> get lldp stats TX Total : 36 TX Errors : 0 RX Total : 36 RX Errors : 0 RX Discards : 0 RX Deletes : 0 Device : eth0 Tx Total : 36 Tx Errors : 0 Device : eth0 Rx Total : 36 Rx Valid : 36 Rx Errors : 0 Rx Discards : 0 Rx Deletes : 0 Neighbor : eth0/0:50:56:b7:7f:47 Rx Total : 36 Rx Valid : 36 Rx Discards : 0 Rx TLV Errors : 0 Rx TLV Unrecognized: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get lldp stats <interface-name>
    Displays LLDP Statistics on given device.
    Option Description
    <interface-name> LLDP interface argument
    Example
    nsx-edge-1> get lldp stats eth0 TX Total : 36 TX Errors : 0 RX Total : 36 RX Errors : 0 RX Discards : 0 RX Deletes : 0 Device : eth0 Tx Total : 36 Tx Errors : 0 Device : eth0 Rx Total : 36 Rx Valid : 36 Rx Errors : 0 Rx Discards : 0 Rx Deletes : 0 Neighbor : eth0/0:50:56:b7:7f:47 Rx Total : 36 Rx Valid : 36 Rx Discards : 0 Rx TLV Errors : 0 Rx TLV Unrecognized: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid>
    Display a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer eba5f460-c660-4f82-8488-62231fb9aea3 Load Balancer Access Log Enabled : False Applied To : Attachment Id : 00002000-0000-0000-0000-000000000008 Type : LOG_SERVICE_ROUTER_CLUSTER Display Name : lbs-on-lr1 Enabled : True UUID : eba5f460-c660-4f82-8488-62231fb9aea3 Log Level : LB_LOG_LEVEL_INFO Size : SMALL Virtual Server Id : 37f1a8c9-ab8b-4ee9-9b41-5da317ac05d3 26168a79-48d6-44a7-86fe-0d5ee7c91e47 7e012072-0594-4063-97f0-82452e9a2813 11bb214f-bd06-4bff-b2a5-6f82e5ec62b6 110ac92c-1647-48a5-8d66-4cac06817716
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> error-log
    Display the error log file for a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer 4d3eafaa-5a16-422a-80d9-f799cb4bd40a error-log 2017/11/16 11:41:43 [info] 8290#0: Initialized l4lb zone (size: 3674112) 2017/11/16 11:41:43 [info] 8290#0: Initialized lb zone (size: 5550080) 2017/11/16 11:41:43 [debug] 8290#0: bind() 127.0.0.1:80 #16 2017/11/16 11:41:43 [info] 8290#0: lb stats module is disabled, configure lbstats_size to enable it. 2017/11/16 11:41:43 [notice] 8290#0: using the "epoll" event method 2017/11/16 11:41:43 [debug] 8290#0: counter: 00007B5D15B1A080, 1 2017/11/16 11:41:43 [info] 8290#0: lb allocated connection ctx (size: 56) . . .
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> error-log follow
    Display the last 10 lines of the error log file for a specific load balancer and all new messages that are written to the log file.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer 4d3eafaa-5a16-422a-80d9-f799cb4bd40a error-log follow 2017/11/16 22:32:13 [debug] 8326#0: worker cycle 2017/11/16 22:32:13 [debug] 8326#0: epoll timer: 346 2017/11/16 22:32:14 [debug] 8326#0: timer delta: 346 2017/11/16 22:32:14 [debug] 8326#0: event timer del: 0: 1510871534258 2017/11/16 22:32:14 [debug] 8326#0: event timer add: 0: 2500:1510871536758 2017/11/16 22:32:14 [debug] 8326#0: http check begin handler index: 1, owner: -1, ngx_pid: 8326, interval: 2479, check_interval: 5000 2017/11/16 22:32:14 [debug] 8326#0: shmtx lock . . .
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> error-log reg-filter <regex>
    Display error log messages containing strings that match the given regular expression pattern for a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <regex> Regular expression
    Example
    nsx-edge-1> get load-balancer 4d3eafaa-5a16-422a-80d9-f799cb4bd40a error-log reg-filter req.* 2017/11/16 11:41:48 [debug] 8326#0: ha: sent bulk pull request 2017/11/16 11:41:48 [notice] 8326#0: ha: sent full sync request, enter request state 2017/11/16 11:41:55 [debug] 8326#0: *3 http wait request handler 2017/11/16 11:41:55 [debug] 8326#0: *3 http process request line 2017/11/16 11:41:55 [debug] 8326#0: *3 http request line: "GET /show_status/all HTTP/1.1" 2017/11/16 11:41:55 [debug] 8326#0: *3 http process request header line . . .
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> health-check-table
    Display the health check table of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer 0f6510bb-ff15-4385-9c45-a1ce626fc276 health-check-table Health-Check-Table INDEX POOL TYPE NAME STATUS RISE FALL PORT CHECK_TIME CHANGE_TIME FAIL_REASON ERRNO STATUS_CODE 0 backend tcp 127.0.0.1:3971 down 0 193 0 Aug 25 01:13:48 Aug 25 01:23:51 Connect Fail Connection refused n/a 1 backend tcp 127.0.0.1:3972 down 0 190 0 Aug 25 01:13:48 Aug 25 01:23:50 Connect Fail Connection refused n/a 2 backend tcp 127.0.0.1:3970 up 192 0 0 Aug 25 01:13:52 Aug 25 01:23:52 n/a n/a n/a 3 backend1 tcp 127.0.0.1:3976 down 0 195 0 Aug 25 01:13:48 Aug 25 01:23:51 Connect Fail Connection refused n/a 4 backend http 127.0.0.1:1971 down 0 196 0 Aug 25 01:13:48 Aug 25 01:23:51 Connect Fail Connection refused n/a 5 backend http 127.0.0.1:1970 down 0 175 0 Aug 25 01:13:48 Aug 25 01:23:51 Rx HTTP Code 4XX n/a 403 6 backend http 127.0.0.1:1972 down 0 195 0 Aug 25 01:13:48 Aug 25 01:23:52 Connect Fail Connection refused n/a 7 backend http 127.0.0.1:1973 down 0 195 0 Aug 25 01:13:48 Aug 25 01:23:51 Connect Fail Connection refused n/a 8 backend http 127.0.0.1:1974 down 0 192 0 Aug 25 01:13:48 Aug 25 01:23:51 Connect Fail Connection refused n/a 9 backend1 http 127.0.0.1:1975 down 0 193 0 Aug 25 01:13:48 Aug 25 01:23:52 Connect Fail Connection refused n/a 10 backend1 http 127.0.0.1:1976 down 0 192 0 Aug 25 01:13:48 Aug 25 01:23:52 Connect Fail Connection refused n/a
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> high-availability-state
    Display the HA state of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer 0f6510bb-ff15-4385-9c45-a1ce626fc276 HA-State LB HA is disable
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> monitor <monitor-uuid>
    Display a specific load balancer monitor.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <monitor-uuid> Monitor UUID argument
    Example
    nsx-edge-1> get load-balancer eba5f460-c660-4f82-8488-62231fb9aea3 monitor 72945dda-f4f1-532f-9bd0-a3f52c099d4b Monitor Display Name : nsx-default-https-monitor Fall Count : 3 Https Monitor : Authenticate Depth : 3 Cipher : TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA TLS_ECDH_RSA_WITH_AES_256_CBC_SHA TLS_RSA_WITH_AES_256_CBC_SHA TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA Protocol : TLS_V1_1 TLS_V1_2 Request Method : HTTP_METHOD_GET Request Version : HTTP_VERSION_1_1 Response Status : HTTP_STATUS_2XX Server Auth : SERVER_AUTH_IGNORE UUID : 72945dda-f4f1-532f-9bd0-a3f52c099d4b Interval : 5 Monitor Port : 443 Rise Count : 3 Timeout : 1970-01-01 00:00:00.015000 (timestamp: 15) Type : HTTPS
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> monitor <monitor-uuid> status
    Show the health check table of a load balancer monitor.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <monitor-uuid> Monitor UUID argument
    Example
    nsx-edge> get load-balancer ed785df6-2143-4944-b918-66470886be83 monitor 72945dda-f4f1-532f-9bd0-a3f52c099d4b status Health-Check-Table INDEX POOL TYPE NAME STATUS RISE FALL PORT CHECK_TIME CHANGE_TIME FAIL_REASON ERRNO STATUS_CODE 6 de719e2 icmp 192.168.100.160:0 up 10755 0 0 Jun 1 11:28:43 May 28 08:30:00 n/a n/a n/a 7 de719e2 icmp 192.168.100.161:0 up 20820 0 0 Jun 1 11:28:46 May 28 08:30:02 n/a n/a n/a
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> monitors
    Display the monitors for a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer eba5f460-c660-4f82-8488-62231fb9aea3 monitors Monitor Display Name : nsx-default-http-monitor Fall Count : 3 Http Monitor : Request Method : HTTP_METHOD_GET Request Version : HTTP_VERSION_1_1 Response Status : HTTP_STATUS_2XX UUID : c2cb7f9e-72d7-55ed-914e-5209b67d02b2 Interval : 5 Monitor Port : 80 Rise Count : 3 Timeout : 1970-01-01 00:00:00.015000 (timestamp: 15) Type : HTTP Monitor Display Name : nsx-default-https-monitor Fall Count : 3 Https Monitor : Authenticate Depth : 3 Cipher : TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA TLS_ECDH_RSA_WITH_AES_256_CBC_SHA TLS_RSA_WITH_AES_256_CBC_SHA TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA Protocol : TLS_V1_1 TLS_V1_2 Request Method : HTTP_METHOD_GET Request Version : HTTP_VERSION_1_1 Response Status : HTTP_STATUS_2XX Server Auth : SERVER_AUTH_IGNORE UUID : 72945dda-f4f1-532f-9bd0-a3f52c099d4b Interval : 5 Monitor Port : 443 Rise Count : 3 Timeout : 1970-01-01 00:00:00.015000 (timestamp: 15) Type : HTTPS
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> persistence-tables
    Display the persistence tables of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer 0f6510bb-ff15-4385-9c45-a1ce626fc276 persistence-tables Persistence-Tables TABLE CADDR DADDR DPORT LIFE_TIME(S) NUM_SESSIONS ip_hash 127.0.0.1 127.0.0.1 1970 84 0 parameter 127.0.0.1 127.0.0.1 1970 96 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> pool <pool-uuid>
    Display a specific load balancer pool.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <pool-uuid> Pool UUID argument
    Example
    nsx-edge-1> get load-balancer eba5f460-c660-4f82-8488-62231fb9aea3 pool 29e66f11-d589-4208-a78d-f72e18aa8286 Pool Algorithm : ROUND_ROBIN Display Name : tcppool1 UUID : 29e66f11-d589-4208-a78d-f72e18aa8286 Member Group : Admin State : ENABLED Container Id : aded6b65-54ce-47b7-8da6-92fa0d96ccf4 Ip Revision Filter : IPV4 Max Ip List Size : 100 Min Active Members : 1 Snat Translation : Auto Map : True Port Overload : 1 Tcp Multiplexing Enabled : False Tcp Multiplexing Number : 6 Member Group UUID : aded6b65-54ce-47b7-8da6-92fa0d96ccf4 Ip Address : Ipv4 : 192.168.1.2 Prefix Length : 31 Ipv4 : 192.168.1.4 Prefix Length : 31 Ipv4 : 192.168.1.6 Prefix Length : 32 Ipv4 : 192.168.4.8 Prefix Length : 24 Ipv4 : 192.168.1.8 Prefix Length : 32 Ipv4 : 192.168.1.1 Prefix Length : 32
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> pool <pool-uuid> snat-pools
    Display information about an LB pool.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <pool-uuid> Pool UUID argument
    Example
    nsx-edge-1> get load-balancer 17b8637a-c816-41dd-b793-6d0acfa53569 pool 5b501a56-e56f-4a76-bba4-70f0de2dbc26 snat-pools SNAT : nat_336860180_4 Min Port : 4096 Max Port : 65535 Port Overload Factor : 32 Random Port : False Snat IP : 20.20.20.20 Allocated Port: 0 Snat IP : 20.20.20.21 Allocated Port: 1 Snat IP : 20.20.20.22 Allocated Port: 0 Snat IP : 20.20.20.23 Allocated Port: 1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> pool <pool-uuid> stats
    Display the statistics for a specific load balancer and pool.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <pool-uuid> Pool UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 pool 953e4da8-a571-4695-b54c-90505d8e59c2 stats Pool UUID : 953e4da8-a571-4695-b54c-90505d8e59c2 Display-Name : tcp pool Type : L4 Sessions : (Cur, Max, Total, Rate) : (0, 0, 0, 0) Bytes : (In, Out) : (0, 0) Packets : (In, Out) : (0, 0) Pool Member Display-Name : m1 IP : 192.168.1.1 Port : 80 Sessions : (Cur, Max, Total, Rate) : (0, 0, 0, 0) Bytes : (In, Out) : (0, 0) Packets : (In, Out) : (0, 0)
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> pool <pool-uuid> status
    Display the status of a specific load balancer and pool.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <pool-uuid> Pool UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 pool 2197df80-77d3-44e6-89b3-1db930be374d status Pool UUID : 2197df80-77d3-44e6-89b3-1db930be374d Display-Name : tcppool1 Status : up Total-Members : 2 Primary Up : 0 Primary Down : 0 Primary Disabled : 0 Primary Graceful Disabled : 0 Backup Up : 0 Backup Down : 0 Backup Graceful Disabled : 0 Backup Disabled : 0 Member Display-Name : m1 IP : 192.168.2.201 Port : 8888 Status : up Last-Check-Time : 2017-10-09 07:11:14 Last-State-Change-Time : 2017-10-09 03:54:28 L4-Passive-State : down L4-Passive-Last-Change-Time : 2018-07-31 04:38:13 Member Display-Name : m2 IP : 192.168.2.202 Port : 8888 Status : up Last-Check-Time : 2017-10-09 07:11:11 Last-State-Change-Time : 2017-10-09 03:54:28 L4-Passive-State : down L4-Passive-Last-Change-Time : 2018-07-31 04:38:13
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> pools
    Display the pools of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer eba5f460-c660-4f82-8488-62231fb9aea3 pools Pool Active Monitor Id : c2cb7f9e-72d7-55ed-914e-5209b67d02b2 Algorithm : ROUND_ROBIN Display Name : httppool1 UUID : d39f9ed7-444c-493d-8c99-327a30befe8e Member : Admin State : ENABLED Backup Member : False Display Name : m1 Ip Address : Ipv4 : 192.168.1.1 Port : 80 Weight : 1 Admin State : ENABLED Backup Member : False Display Name : m2 Ip Address : Ipv4 : 192.168.1.2 Port : 80 Weight : 1 Min Active Members : 1 Snat Translation : Auto Map : True Port Overload : 1 Tcp Multiplexing Enabled : False Tcp Multiplexing Number : 6 Pool Algorithm : ROUND_ROBIN Display Name : tcppool1 UUID : 29e66f11-d589-4208-a78d-f72e18aa8286 Member Group : Admin State : ENABLED Container Id : aded6b65-54ce-47b7-8da6-92fa0d96ccf4 Ip Revision Filter : IPV4 Max Ip List Size : 100 Min Active Members : 1 Snat Translation : Auto Map : True Port Overload : 1 Tcp Multiplexing Enabled : False Tcp Multiplexing Number : 6
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> pools stats
    Display the statistics for all the pools of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 pools stats Pool UUID : 953e4da8-a571-4695-b54c-90505d8e59c2 Display-Name : tcp pool Type : L4 Sessions : (Cur, Max, Total, Rate) : (0, 0, 0, 0) Bytes : (In, Out) : (0, 0) Packets : (In, Out) : (0, 0) Pool UUID : 0ba2817e-9ddb-411e-a397-ef2f3b099a46 Display-Name : http pool Type : L7 Sessions : (Cur, Max, Total, Rate) : (0, 0, 0, 0) Bytes : (In, In-Rate) : (0, 0) (Out, Out-Rate) : (0, 0) HTTP Requests : (Total, Rate) : (0, 0) Pool UUID : 0ba2817e-9ddb-411e-a397-ef2f3b099a83 Display-Name : shared pool Type : L4 and L7 Sessions : (Cur, Max, Total, Rate) : (0, 0, 0, 0) Bytes : (In, In-Rate) : (0, 0) (Out, Out-Rate) : (0, 0) HTTP Requests : (Total, Rate) : (0, 0) Packets : (In, Out) : (0, 0)
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> pools status
    Display the status of all the pools of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 pools status Pool UUID : 2197df80-77d3-44e6-89b3-1db930be374d Display-Name : tcppool1 Members : 2 Status : up Primary-UP-No : 0 Backup-UP-No : 0 Pool UUID : 5cca6ba3-5732-4ea9-8197-c582e211a0aa Display-Name : httppool1 Members : 2 Status : up Primary-UP-No : 0 Backup-UP-No : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> session-tables
    Display the sessions of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer eba5f460-c660-4f82-8488-62231fb9aea3 session-tables Session-Tables TABLE ID PROTO CADDR CPORT VADDR VPORT SADDR SPORT DADDR DPORT l4lb-0 0000000000000000 udp 10.10.10.10 2000 20.20.20.20 80 30.30.30.30 4096 40.40.40.40 8000 l4lb-0 0000000000000001 tcp 10.10.10.11 2000 20.20.20.21 80 30.30.30.31 4097 40.40.40.41 8000 l4lb-0 0000000000000002 tcp 10.10.10.12 2000 20.20.20.22 80 30.30.30.32 5000 40.40.40.42 8000 l4lb-0 0000000000000004 tcp 10.10.10.14 2000 20.20.20.24 80 30.30.30.34 6000 40.40.40.44 8000
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> session-tables l4
    Get the load balancer L4 session table with the expiration time.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer 4f518a4e-9a40-43d3-98ef-db654e8be7c5 session-tables l4 Session-Tables TABLE ID PROTO CADDR CPORT VADDR VPORT SADDR SPORT DADDR DPORT STATE EXP l4lb-0 00000001000159f2 tcp 10.114.218.199 35011 10.114.213.75 80 10.114.218.199 35011 10.37.1.11 80 TW 45 l7lb-0 00000001000159f8 tcp 10.114.218.199 35012 10.114.213.75 80 10.114.218.199 35012 10.37.1.12 80 EST 3600
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> snat-pools
    Get load-balancer snat pools' information.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 snat-pools SNAT : nat_3232235998_1 Min Port : 4096 Max Port : 65535 Port Overload Factor : 1 Random Port : False Snat IP : 192.168.1.222 Allocated Port: 0 SNAT : nat_3232235998_3 Min Port : 4096 Max Port : 65535 Port Overload Factor : 1 Random Port : False Snat IP : 192.168.1.222 Allocated Port: 0 Snat IP : 192.168.1.223 Allocated Port: 0 Snat IP : 192.168.1.224 Allocated Port: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> stats
    Display the statistics for a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 stats Load Balancer UUID : ed785df6-2143-4944-b918-66470886be83 Display-Name : lbs-dgo Enabled : True Type CUR_SESS MAX_SESS TOTAL_SESS SESS_RATE L4 1000 2000 34325 30 L7 100 100 54321 10
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> status
    Display the status of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 status Load Balancer UUID : ed785df6-2143-4944-b918-66470886be83 Display-Name : lbs-dgo Enabled : True LB-State : not_ready LR-HA-State : active Virtual Servers : 2 Up Virtual Servers: 0 Pools : 2 Up Pools : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-server <vs-uuid>
    Display a specific load balancer virtual server.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <vs-uuid> Virtual server UUID argument
    Example
    nsx-edge-1> get load-balancer eba5f460-c660-4f82-8488-62231fb9aea3 virtual-server 11bb214f-bd06-4bff-b2a5-6f82e5ec62b6 Virtual Server Application Profile Id : 4b6d4d28-208e-4a0d-a9aa-a712934d5bef Display Name : udpvip1 Enabled : True UUID : 11bb214f-bd06-4bff-b2a5-6f82e5ec62b6 Ip Address : Ipv4 : 124.124.124.124 Ip Protocol : UDP Pool Id : 56722b45-c276-43fb-81d0-4b15760fdbce Port : 9999 Application Profile Application Type : FAST_UDP Display Name : fastUdpProfile1 Fast Udp Profile : Flow Mirroring Enabled : False Idle Timeout : 1970-01-01 00:00:00.300000 (timestamp: 300) UUID : 4b6d4d28-208e-4a0d-a9aa-a712934d5bef
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-server <vs-uuid> access-log
    Display the access log file for a specific load balancer and virtual server.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <vs-uuid> Virtual server UUID argument
    Example
    nsx-edge-1> get load-balancer 4d3eafaa-5a16-422a-80d9-f799cb4bd40a virtual-server 953e4da8-a571-4695-b54c-90505d8e59c2 access-log 1.1.5.10 - - [16/Nov/2017:11:47:49 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:47:49 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:48:15 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:48:16 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:48:17 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:54:50 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:16:42:15 +0000] "GET / HTTP/1.1" 200 22 "-" "-" . . .
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-server <vs-uuid> access-log follow
    Display the last 10 lines of the access log file for a specific virtual server of load balancer and all new messages that are written to the log file.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <vs-uuid> Virtual server UUID argument
    Example
    nsx-edge-1> get load-balancer 4d3eafaa-5a16-422a-80d9-f799cb4bd40a virtual-server 953e4da8-a571-4695-b54c-90505d8e59c2 access-log follow 1.1.5.10 - - [16/Nov/2017:11:47:49 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:47:49 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:48:15 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:48:16 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:48:17 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:54:50 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:16:42:15 +0000] "GET / HTTP/1.1" 200 22 "-" "-" . . .
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-server <vs-uuid> access-log reg-filter <regex>
    Display access log messages containing strings that match the given regular expression pattern for a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <vs-uuid> Virtual server UUID argument
    <regex> Regular expression
    Example
    nsx-edge-1> get load-balancer 4d3eafaa-5a16-422a-80d9-f799cb4bd40a virtual-server 953e4da8-a571-4695-b54c-90505d8e59c2 access-log reg-filter 16/Nov.*11:48 1.1.5.10 - - [16/Nov/2017:11:48:15 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:48:16 +0000] "GET / HTTP/1.1" 200 22 "-" "-" 1.1.5.10 - - [16/Nov/2017:11:48:17 +0000] "GET / HTTP/1.1" 200 22 "-" "-"
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-server <vs-uuid> lbrules
    Display the load balancer rules for a specific load balancer and virtual server.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <vs-uuid> Virtual server UUID argument
    Example
    nsx-edge-1> get load-balancer eba5f460-c660-4f82-8488-62231fb9aea3 virtual-server 110ac92c-1647-48a5-8d66-4cac06817716 lbrules LbRule Action : Action Type : HTTP_REQUEST_URI_REWRITE Http Request Uri Rewrite : Uri : /product_detail.html Display Name : RewriteRequestUrl UUID : 4202cb56-c8b3-4d7a-9f61-686d55ed7d80 Match Condition : Http Request Url Config : Request Url : /product.html Match Type : HTTP_REQUEST_URL Match Strategy : MATCH_STRATEGY_ANY Phase : HTTP_REQUEST_REWRITE LbRule Action : Action Type : SELECT_POOL Select Pool Config : Pool Id : e7a438a1-69e9-4347-9f21-0f28d7aa44d9 Display Name : LoginRouteRule UUID : 58ba5a69-6a5a-4b6b-8899-d0fa8159fbcd Match Condition : Http Request Url Config : Request Url : /login.html Match Type : HTTP_REQUEST_URL Match Strategy : MATCH_STRATEGY_ALL Phase : HTTP_FORWARDING
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-server <vs-uuid> stats
    Display the statistics for a specific load balancer and virtual server.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <vs-uuid> Virtual server UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 virtual-server 953e4da8-a571-4695-b54c-90505d8e59c2 stats Virtual Server UUID : 953e4da8-a571-4695-b54c-90505d8e59c2 Display-Name : tcpvip1 VIP : TCP 123.123.123.123:80 Type : L4 Sessions : (Cur, Max, Total, Rate) : (0, 0, 0, 0) Bytes : (In, Out) : (0, 0) Packets : (In, Out) : (0, 0)
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-server <vs-uuid> status
    Display the status of a specific load balancer virtual server.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    <vs-uuid> Virtual server UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 virtual-server 0ba2817e-9ddb-411e-a397-ef2f3b099a46 status Virtual Server UUID : 0ba2817e-9ddb-411e-a397-ef2f3b099a46 Display-Name: http-vip-1 IP : 123.123.123.123 Port : 80 Status : up
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-servers
    Display the virtual servers of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer eba5f460-c660-4f82-8488-62231fb9aea3 virtual-servers Virtual Server Application Profile Id : 9c4d7f35-13f9-46fc-8d57-d60f0a12544d Display Name : http-vip-1 Enabled : True UUID : 37f1a8c9-ab8b-4ee9-9b41-5da317ac05d3 Ip Address : Ipv4 : 123.123.123.123 Ip Protocol : TCP Persistence Profile Id : e57ef9b9-fe06-4269-9c2c-9fc2609e3941 Pool Id : d39f9ed7-444c-493d-8c99-327a30befe8e Port : 80 Virtual Server Application Profile Id : f5586889-a812-4e64-b735-610851a6fad6 Display Name : tcpvip1 Enabled : True UUID : 26168a79-48d6-44a7-86fe-0d5ee7c91e47 Ip Address : Ipv4 : 123.123.123.123 Ip Protocol : TCP Persistence Profile Id : 17d24b73-c090-495a-b60f-ed772b613bdf Pool Id : 29e66f11-d589-4208-a78d-f72e18aa8286 Port : 8888
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-servers stats
    Display the statistics for all virtual servers of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 virtual-servers stats Virtual Server UUID : 953e4da8-a571-4695-b54c-90505d8e59c2 Display-Name : tcpvip1 VIP : TCP 123.123.123.123:80 Type : L4 Sessions : (Cur, Max, Total, Rate) : (0, 0, 0, 0) Bytes : (In, Out) : (0, 0) Packets : (In, Out) : (0, 0) Virtual Server UUID : 0ba2817e-9ddb-411e-a397-ef2f3b099a46 Display-Name : http-vip-1 VIP : TCP 123.123.123.123:8080 Type : L7 Sessions : (Cur, Max, Total, Rate) : (0, 0, 0, 0) Bytes : (In, In-Rate) : (0, 0) (Out, Out-Rate) : (0, 0) HTTP Requests : (Total, Rate) : (0, 0)
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer <lb-uuid> virtual-servers status
    Display the status of all virtual servers of a specific load balancer.
    Option Description
    <lb-uuid> LoadBalancer UUID argument
    Example
    nsx-edge-1> get load-balancer ed785df6-2143-4944-b918-66470886be83 virtual-servers status Virtual Server UUID : 953e4da8-a571-4695-b54c-90505d8e59c2 Display-Name: tcpvip1 IP : 123.123.123.123 Port : 8888 Status : up Virtual Server UUID : 0ba2817e-9ddb-411e-a397-ef2f3b099a46 Display-Name: http-vip-1 IP : 123.123.123.123 Port : 80 Status : up
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancer perf-profile config
    Get edge parameters configured by load balancer for performance.
    Example
    nsx-edge-1> get load-balancer perf-profile config Load Balancer Performance Config Profile :large vm http profile Dataplane Kni Busy Loop :enabled Kni Fifo Size :8192 Tx Ring Size :512 Rx Ring Size :512 Cores :0 Intr Mode :disabled Kni Mbuf Burst Num :2048 Dispatcher Cores :4,5,6,7 Kni Cores :1 Rps Cpus :2,3 Engine Cores :4,5,6,7
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancers
    Display all load balancers.
    Example
    nsx-edge-1> get load-balancers Load Balancer Access Log Enabled : False Applied To : Attachment Id : 00002000-0000-0000-0000-000000000008 Type : LOG_SERVICE_ROUTER_CLUSTER Display Name : lbs-on-lr1 Enabled : True UUID : eba5f460-c660-4f82-8488-62231fb9aea3 Log Level : LB_LOG_LEVEL_INFO Size : SMALL Virtual Server Id : 37f1a8c9-ab8b-4ee9-9b41-5da317ac05d3 26168a79-48d6-44a7-86fe-0d5ee7c91e47 7e012072-0594-4063-97f0-82452e9a2813 11bb214f-bd06-4bff-b2a5-6f82e5ec62b6 110ac92c-1647-48a5-8d66-4cac06817716
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get load-balancers status
    Display the status of all load balancers.
    Example
    nsx-edge-1> get load-balancers status Load Balancer UUID : ed785df6-2143-4944-b918-66470886be83 Display-Name : lbs-dgo Enabled : True LB-State : not_ready LR-HA-State : active
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get log-file <filename>
    Display the contents of the specified log file.
    Option Description
    <filename> Log file name
    Example
    nsx-manager-1> get log-file manager.log 2016-10-24 05:11:50.292 UTC INFO MaintenanceSyncTimer RestRequestImpl - - [nsx comp="nsx-manager" subcomp="manager"] URL : https://localhost:15671/api/connections?columns=name,user Entity Body : <{Accept=[application/json]}> method: GET 2016-10-24 05:11:50.312 UTC INFO MaintenanceSyncTimer RestRequestImpl - - [nsx comp="nsx-manager" subcomp="manager"] URL : https://localhost:15671/api/connections?columns=name,user Response Body : [Lcom.vmware.nsx.management.messaging.rabbitmq.Connection;@59e806a2 method : GET 2016-10-24 05:11:50.312 UTC INFO MaintenanceSyncTimer RestRequestImpl - - [nsx comp="nsx-manager" subcomp="manager"] URL : https://localhost:15671/api/users Entity Body : <{Accept=[application/json]}> method: GET 2016-10-24 05:11:50.354 UTC INFO MaintenanceSyncTimer RestRequestImpl - - [nsx comp="nsx-manager" subcomp="manager"] URL : https://localhost:15671/api/users Response Body : [Lcom.vmware.nsx.management.messaging.rabbitmq.Account;@5307ed29 method : GET 2016-10-24 05:11:55.298 UTC INFO increment-barrier-timer RealizationStateBarrierServiceImpl - SYSTEM [nsx comp="nsx-manager" subcomp="manager"] Incremented realization state barrier number to 122598 2016-10-24 05:11:55.674 UTC INFO Event Processor for GatewaySender_AsyncEventQueue_txLogEventQueue TxLogAsyncEventListener - - [nsx comp="nsx-manager" subcomp="manager"] Gets 1 events to process. . . .
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get log-file <filename> follow
    Display the last 10 lines of the specified log file and all new messages that are written to the log file.
    Option Description
    <filename> Log file name
    Example
    nsx-manager-1> get log-file manager.log follow 2016-10-24 05:11:50.292 UTC INFO MaintenanceSyncTimer RestRequestImpl - - [nsx comp="nsx-manager" subcomp="manager"] URL : https://localhost:15671/api/connections?columns=name,user Entity Body : <{Accept=[application/json]}> method: GET 2016-10-24 05:11:50.312 UTC INFO MaintenanceSyncTimer RestRequestImpl - - [nsx comp="nsx-manager" subcomp="manager"] URL : https://localhost:15671/api/connections?columns=name,user Response Body : [Lcom.vmware.nsx.management.messaging.rabbitmq.Connection;@59e806a2 method : GET 2016-10-24 05:11:50.312 UTC INFO MaintenanceSyncTimer RestRequestImpl - - [nsx comp="nsx-manager" subcomp="manager"] URL : https://localhost:15671/api/users Entity Body : <{Accept=[application/json]}> method: GET 2016-10-24 05:11:50.354 UTC INFO MaintenanceSyncTimer RestRequestImpl - - [nsx comp="nsx-manager" subcomp="manager"] URL : https://localhost:15671/api/users Response Body : [Lcom.vmware.nsx.management.messaging.rabbitmq.Account;@5307ed29 method : GET 2016-10-24 05:11:55.298 UTC INFO increment-barrier-timer RealizationStateBarrierServiceImpl - SYSTEM [nsx comp="nsx-manager" subcomp="manager"] Incremented realization state barrier number to 122598 2016-10-24 05:11:55.674 UTC INFO Event Processor for GatewaySender_AsyncEventQueue_txLogEventQueue TxLogAsyncEventListener - - [nsx comp="nsx-manager" subcomp="manager"] Gets 1 events to process. . . .
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get logging-servers
    Display logging server configuration.
    Example
    nsx> get logging-servers 192.168.110.60 proto udp level info facility syslog messageid SYSTEM,FABRIC 192.168.110.60 proto udp level info facility auth,user
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get logical-router <uuid>
    Display information about the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get logical-router 091a05dc-8080-41a2-a56f-baf6d32fb512 Logical Router ================================================== UUID : 091a05dc-8080-41a2-a56f-baf6d32fb512 ID : 32769 Interfaces : 100.64.1.1/31 (02:50:56:00:00:03) 172.16.30.1/24 (02:50:56:56:44:52) 172.16.10.1/24 (02:50:56:56:44:52) 172.16.20.1/24 (02:50:56:56:44:52)
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-router <uuid>
    Display information about the specified logical router.
    Option Description
    <uuid> Logical Router identifier
    Allowed pattern: ^[0-9]+$|^0x[0-9a-fA-F]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-router db6760b3-d9e2-44ef-b1c4-f56138665d71 LR-Id LR-Name Hosts[] Service-Controller Router-Type ClusterId UUID 0x5 SR-46740ffe-9bf1-406e-816d-e200a45f0707 192.168.110.111 192.168.110.108 SERVICE_ROUTER_TIER1 00002000-0000-0000-0000-000000000001 db6760b3-d9e2-44ef-b1c4-f56138665d71 192.168.110.112
    Mode
    Basic
    Availability
    Controller

    get logical-router <uuid>
    Display information about the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 Logical Router ------------------------------------------------------------------------------------- VDR UUID : d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 LIF number : 4 Route number : 7 State : ['Enabled'] Controller IP : 192.168.110.108 Control plane IP : 192.168.210.51 Control plane active : True Next hop number : 1 Generation number : 0 Edge active : False
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid>
    Display information about the specified logical router.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router 736a80e3-23f6-5a2d-81d6-bbefb2786666 Logical Router UUID VRF LR-ID Name Type Ports 736a80e3-23f6-5a2d-81d6-bbefb2786666 0 0 R1 TUNNEL 3
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> bfd-config
    Display parameters defined in global logical router BFD
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge> get logical-router 463c9dd1-986b-4947-895b-1126bd53abc8 bfd-config Logical Router UUID : d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 vrf : 6 lr-id : 6 name : R1 type : SERVICE_ROUTER_TIER0 BFD global configuration Enabled : True Min RX Interval: 1000 Min TX Interval: 1000 Min RX TTL : 255 Multiplier : 3 Port : 4451c48f-8cff-4444-8e10-bff403783dca BFD session configuration Source : 192.168.50.1 Peer : 192.168.50.10 Enabled : True Min RX Interval: 1000 Min TX Interval: 1000 RX TTL : 255 Multiplier : 3 Source : 192.168.50.1 Peer : 192.168.50.20 Enabled : True Min RX Interval: 3000 Min TX Interval: 3000 RX TTL : 255 Multiplier : 5
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> bfd-sessions [stats]
    Display BFD sessions in a logical router
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge> get logical-router 463c9dd1-986b-4947-895b-1126bd53abc8 bfd-session BFD Session Dest_port : 3784 Diag : No Diagnostic Encap : vlan Forwarding : last false (current false) Interface : 4451c48f-8cff-4444-8e10-bff403783dca Last_cp_diag : No Diagnostic Last_cp_rmt_diag : No Diagnostic Last_cp_rmt_state : admin_down Last_cp_state : admin_down Last_fwd_state : NONE Local_address : 192.168.50.1 Local_discr : 2830404107 Min_rx_ttl : 255 Multiplier : 5 Prev_failure_diag : No Diagnostic Received_remote_diag : No Diagnostic Received_remote_state : down Remote_address : 192.168.50.20 Remote_admin_down : false Remote_diag : No Diagnostic Remote_discr : 0 Remote_min_rx_interval : 0 Remote_min_tx_interval : 0 Remote_multiplier : 0 Remote_state : down Rx_cfg_min : 3000 Rx_interval : 3000 Session_type : LR_PORT State : down Tx_cfg_min : 3000 Tx_interval : 3000
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> bgp
    Display all IPv4 & IPv6 BGP routes.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be bgp BGP table version is 1, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 111.111.0.0/16 100.64.0.1 0 100 32768 2000 ? > 2003::/24 :: 0 100 32768 2000 ? > 2002::/64 fca9:1c1c:96b2:e000::2 0 100 32768 2000 ? > 2001::/64 fca9:1c1c:96b2:e000::2 0 100 32768 2000 ?
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> bgp community <bgp-community>
    Display all BGP NLRI matching the community.
    Option Description
    <uuid> Datapath UUID argument
    <bgp-community> BGP community argument, either NO_EXPORT, NO_ADVERTISE, NO_EXPORT_SUBCONFED or community in AA:NN format
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be bgp community 1:1 BGP table version is 1, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 111.111.0.0/16 100.64.0.1 0 100 32768 2000 ? > 2003::/24 :: 0 100 32768 2000 ?
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> bgp neighbor
    Display all BGP neighbor information.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be bgp neighbor BGP neighbor is 50.50.50.10, remote AS 1000, local AS 2000, external link Hostname: prome-mdt-dhcp412 BGP version 4, remote router ID 50.50.50.10, local router ID 50.50.50.1 BGP state = Established, up for 2d13h28m Last read 00:00:17, Last write 00:00:19 Hold time is 180, keepalive interval is 60 seconds Configured hold time is 180, keepalive interval is 60 seconds Neighbor capabilities: 4 Byte AS: advertised and received AddPath: IPv4 Unicast: RX advertised IPv4 Unicast and received Route refresh: advertised and received(old & new) Address Family IPv4 Unicast: advertised and received Hostname Capability: advertised (name: nsx-edge-1,domain name: n/a) received (name: prome-mdt-dhcp412,domain name: n/a) Graceful Restart Capabilty: advertised and received Remote Restart timer is 120 seconds Address families by peer: none Graceful restart informations: End-of-RIB send: IPv4 Unicast End-of-RIB received: IPv4 Unicast Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 14 13 Notifications: 2 16 Updates: 10 10 Keepalives: 3832 3827 Route Refresh: 0 0 Capability: 0 0 Total: 3858 3866 Minimum time between advertisement runs is 0 seconds Update source is 50.50.50.1 For address family: IPv4 Unicast Update group 49, subgroup 49 Packet Queue length 0 Community attribute sent to this neighbor(all) 0 accepted prefixes Connections established 6; dropped 5 Last reset 2d13h28m, due to Interface down Local host: 50.50.50.1, Local port: 179 Foreign host: 50.50.50.10, Foreign port: 39948 Nexthop: 50.50.50.1 Nexthop global: 2005::2828:2801 Nexthop local: fe80::53ff:feb2:c1ad BGP connection: shared network BGP Connect Retry Timer in Seconds: 120 Estimated round trip time: 1 ms Read thread: on Write thread: on BFD Status: peer 50.50.50.10 status down
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> bgp neighbor <ip-address>
    Display information about a specific BGP neighbor.
    Option Description
    <uuid> Datapath UUID argument
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be bgp neighbor 2005::2828:280a BGP neighbor is 2005::2828:280a, remote AS 1000, local AS 2000, external link Administratively shut down BGP version 4, remote router ID 0.0.0.0, local router ID 50.50.50.1 BGP state = Idle Last read 2d16h06m, Last write never Hold time is 180, keepalive interval is 60 seconds Configured hold time is 4, keepalive interval is 1 seconds Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 0 0 Notifications: 0 0 Updates: 0 0 Keepalives: 0 0 Route Refresh: 0 0 Capability: 0 0 Total: 0 0 Minimum time between advertisement runs is 0 seconds For address family: IPv6 Unicast Not part of any update group Community attribute sent to this neighbor(all) 0 accepted prefixes Connections established 0; dropped 0 Last reset never BGP Connect Retry Timer in Seconds: 120 Read thread: off Write thread: off BFD Status: Not configured
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> bgp neighbor <ip-address> advertised-routes
    Display routes advertised to a BGP neighbor.
    Option Description
    <uuid> Datapath UUID argument
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be bgp neighbor 50.50.50.10 advertised-routes BGP table version is 1, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 111.111.0.0/16 100.64.0.1 0 100 32768 2000 ?
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> bgp neighbor <ip-address> routes
    Display routes learnt from a BGP neighbor.
    Option Description
    <uuid> Datapath UUID argument
    <ip-address> Network IP address argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be bgp neighbor 50.50.50.10 routes BGP table version is 1, local router ID is 50.50.50.1 Status flags: > - best, I - internal Origin flags: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path > 11.11.0.0/16 100.64.0.2 0 100 32768 2000 ?
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> bgp neighbor summary
    Display summarized BGP neighbor information.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be bgp neighbor summary BFD States: NC - Not configured, AC - Activating,DC - Disconnected AD - Admin down, DW - Down, IN - Init,UP - Up BGP summary information for VRF default for address-family: ipv4Unicast Router ID: 50.50.50.1 Local AS: 2000 Neighbor AS State Up/DownTime BFD InMsgs OutMsgs InPfx OutPfx 50.50.50.10 1000 Estab 2d13h55m DW 3893 3885 0 1 BFD States: NC - Not configured, AC - Activating,DC - Disconnected AD - Admin down, DW - Down, IN - Init,UP - Up BGP summary information for VRF default for address-family: ipv6Unicast Router ID: 50.50.50.1 Local AS: 2000 Neighbor AS State Up/DownTime BFD InMsgs OutMsgs InPfx OutPfx 2005::2828:280a 1000 Idle never NC 0 0 0 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> forwarding
    Display forwarding for the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get logical-router 3f37a518-0b5a-4833-be11-0f6df5e96421 forward Logical Router Forwarding Table ============================================================================================================== Prefix Gateway Interface 100.64.1.0/31 0.0.0.0 7f475e70-6919-42f4-a9ab-7c8381ef93c2 192.168.10.0/24 0.0.0.0 4891b955-a8cf-4e2f-b87f-ea1fc6c3b7a8 192.168.20.0/24 0.0.0.0 a12f6616-31bd-4d75-8972-bc75f3fe4392 0.0.0.0/0 100.64.1.0 7f475e70-6919-42f4-a9ab-7c8381ef93c2 2000:20::/64 :: a12f6616-31bd-4d75-8972-bc75f3fe4392 2000:10::/64 :: 4891b955-a8cf-4e2f-b87f-ea1fc6c3b7a8 fc88:474c:60c:2800::/64 :: 7f475e70-6919-42f4-a9ab-7c8381ef93c2 ::/0 fc88:474c:60c:2800::1 7f475e70-6919-42f4-a9ab-7c8381ef93c2
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-router <uuid> forwarding
    Display forwarding for the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 forwarding Logical Routers Forwarding Table ----------------------------------------------------------------------------------------------------- Flags Legend: [U: Up], [G: Gateway], [C: Connected], [I: Interface] [H: Host], [R: Reject], [B: Blackhole], [F: Soft Flush], [E: ECMP] Network Gateway Type Interface UUID ===================================================================================================== 192.168.1.0/24 0.0.0.0 UCI 1c1a47f7-d314-4e74-a198-5568540e4284 192.168.2.0/24 0.0.0.0 UCI 53a15328-e7cb-4c97-b147-e7ee833754db 2000::1/64 :: UCI 1c1a47f7-d314-4e74-a198-5568540e4284 3000::1/64 :: UCI 53a15328-e7cb-4c97-b147-e7ee833754db
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> forwarding <prefix>
    Display forwarding for the specified logical router filtered on prefix.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    <prefix> Network Address argument
    Example
    esx-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 forwarding 192.168.1.0/24 Logical Routers Forwarding Table ----------------------------------------------------------------------------------------------------- Flags Legend: [U: Up], [G: Gateway], [C: Connected], [I: Interface] [H: Host], [R: Reject], [B: Blackhole], [F: Soft Flush], [E: ECMP] Network Gateway Type Interface UUID ===================================================================================================== 192.168.1.0/24 0.0.0.0 UCI 1c1a47f7-d314-4e74-a198-5568540e4284
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> forwarding <prefix>
    Display forwarding for the specified logical router, filtered by prefix.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    <prefix> Network Address argument
    Example
    kvm-1> get logical-router 091a05dc-8080-41a2-a56f-baf6d32fb512 forwarding fc88:474c:60c:2800::/64 Logical Router Forwarding Table ============================================================================================================== Prefix Gateway Interface fc88:474c:60c:2800::/64 :: 7f475e70-6919-42f4-a9ab-7c8381ef93c2
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-router <uuid> forwarding [<prefix>]
    Display the forwarding table for the specified logical router. Optionally specify a prefix to display only the entry that matches that network.
    Option Description
    <uuid> Datapath UUID argument
    <prefix> Network Address argument
    Example
    nsx-edge-1> get logical-router 736a80e3-23f6-5a2d-81d6-bbefb2786666 forwarding Logical Router UUID VRF LR-ID Name Type 736a80e3-23f6-5a2d-81d6-bbefb2786666 0 0 R1 TUNNEL IPv4 Forwarding Table IP Prefix Gateway IP Type UUID Gateway MAC 142.134.61.0/24 route 34ca595f-fa62-5ed4-afcc-a6ef0195d4ed 142.134.61.36/32 route f322c6ca-4298-568b-81c7-a006ba6e6c88 or nsx-edge-1> get logical-router 736a80e3-23f6-5a2d-81d6-bbefb2786666 forwarding 142.134.61.0/24 Logical Router UUID VRF LR-ID Name Type 736a80e3-23f6-5a2d-81d6-bbefb2786666 0 0 R1 TUNNEL IPv4 Forwarding Table IP Prefix Gateway IP Type UUID Gateway MAC 142.134.61.0/24 route 34ca595f-fa62-5ed4-afcc-a6ef0195d4ed
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> forwarding ipv4
    Display forwarding for the specified logical router (ipv4).
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 forwarding Logical Routers Forwarding Table - IPv4 ------------------------------------------------------------------------------------------------------ Flags Legend: [U: Up], [G: Gateway], [C: Connected], [I: Interface] [H: Host], [R: Reject], [B: Blackhole], [F: Soft Flush], [E: ECMP] Network Gateway Type Interface UUID ===================================================================================================== 192.168.1.0/24 0.0.0.0 UCI 1c1a47f7-d314-4e74-a198-5568540e4284 192.168.2.0/24 0.0.0.0 UCI 53a15328-e7cb-4c97-b147-e7ee833754db
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> forwarding ipv4
    Display IPv4 forwarding for the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get logical-router 3f37a518-0b5a-4833-be11-0f6df5e96421 forward Logical Router Forwarding Table ============================================================================================================== Prefix Gateway Interface 100.64.1.0/31 0.0.0.0 7f475e70-6919-42f4-a9ab-7c8381ef93c2 192.168.10.0/24 0.0.0.0 4891b955-a8cf-4e2f-b87f-ea1fc6c3b7a8 192.168.20.0/24 0.0.0.0 a12f6616-31bd-4d75-8972-bc75f3fe4392
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-router <uuid> forwarding ipv6
    Display forwarding for the specified logical router (ipv6).
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 forwarding Logical Routers Forwarding Table - IPv6 ------------------------------------------------------------------------------------------------------- Flags Legend: [U: Up], [G: Gateway], [C: Connected], [I: Interface] [H: Host], [R: Reject], [B: Blackhole], [F: Soft Flush], [E: ECMP] Network Gateway Type Interface UUID ===================================================================================================== 2000::1/64 :: UCI 1c1a47f7-d314-4e74-a198-5568540e4284 3000::1/64 :: UCI 53a15328-e7cb-4c97-b147-e7ee833754db
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> forwarding ipv6
    Display IPv6 forwarding for the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get logical-router 091a05dc-8080-41a2-a56f-baf6d32fb512 forwarding ipv6 Logical Router Forwarding Table ============================================================================================================== Prefix Gateway Interface 2000:20::/64 :: a12f6616-31bd-4d75-8972-bc75f3fe4392 2000:10::/64 :: 4891b955-a8cf-4e2f-b87f-ea1fc6c3b7a8 fc88:474c:60c:2800::/64 :: 7f475e70-6919-42f4-a9ab-7c8381ef93c2 ::/0 fc88:474c:60c:2800::1 7f475e70-6919-42f4-a9ab-7c8381ef93c2
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-router <uuid> high-availability history state
    Display the high availability state history for the specified logical router. Only service routers have a high availability status. Use the get logical-routers command to get a list of logical routers and their router types.
    Option Description
    <uuid> UUID argument
    Example
    nsx-edge-1> get logical-router 4e425c9e-09c6-4021-bbc7-fab2895a2c09 high-availability history state State : Down Event : Init Resources : Time : 2016-02-02 18:41:22.80 State : Active Event : Node Up Resources : 0 Time : 2016-02-02 18:41:26.91
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> high-availability status
    Display the high availability status for the specified logical router. Only service routers have a high availability status. Use the get logical-routers command to get a list of logical routers and their router types.
    Option Description
    <uuid> UUID argument
    Example
    nsx-edge-1> get logical-router 4e425c9e-09c6-4021-bbc7-fab2895a2c09 high-availability status Service Router UUID : 4e425c9e-09c6-4021-bbc7-fab2895a2c09 state : Active type : TIER0 mode : A/A rank : 0 service count : 1 service score : 1 HA ports state UUID : 733d7ed3-1daa-4c28-bc0a-77e3736fea14 op_state : Up addresses : 169.0.0.2/28 Peer Nodes UUID : 3b34da96-ed06-11e8-9814-020063efb6dc 2e7dcee8-ed06-11e8-b593-020063334468
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> interface <interface-id>
    Display information about a specific interface on the specified logical router.
    Option Description
    <uuid> Logical Router identifier
    Allowed pattern: ^[0-9]+$|^0x[0-9a-fA-F]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    <interface-id> Logical Router interface id
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-router db6760b3-d9e2-44ef-b1c4-f56138665d71 interface 8b06827f-6325-4afd-b56d-6260ebf0a1a0 UUID: 8b06827f-6325-4afd-b56d-6260ebf0a1a0 Interface-Name: bp-sr0-port Logical-Router-Id: 0x5 Id: 15240 Type: VXSTT AdminStateUp: true UrpfMode: PORT_CHECK Subnets: 169.0.0.2/28 Mac: 02:50:56:00:00:06 Mtu: 0 Multicast-IP: 0.0.0.1 Flags: 0x204 DHCP-Server-IP:
    Mode
    Basic
    Availability
    Controller

    get logical-router <uuid> interface <uuid>
    Display interface information for the specified logical router and port.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get logical-router 091a05dc-8080-41a2-a56f-baf6d32fb512 interface e1ce6498-b3ca-4000-a0f4-0734415044cf Logical Router Interfaces ============================================================ Interface UUID : e1ce6498-b3ca-4000-a0f4-0734415044cf IP/Mask : 100.64.1.1/31 MAC Address : 02:50:56:00:00:03 VNI : 58248 Flag : 1 DHCP relay : 192.168.33.1, 2001::192:168:33:1 ============================================================
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-router <uuid> interface <uuid>
    Display information for the specified logical router instance.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 interface c66fc321-df74-4aaa-835e-95dc815fe7ae Logical Router Interface --------------------------------------------------------------------------- LIF UUID : c66fc321-df74-4aaa-835e-95dc815fe7ae Mode : ['Routing'] Overlay VNI : 27530 IP : 172.16.130.1 IP mask : 255.255.255.0 Mac : 02:50:56:56:44:52 Connected DVS : nsxvswitch Control plane enable : True Replication Mode : 0.0.0.1 State : ['Enabled'] Flags : 0x2388 DHCP relay : Not enable
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> interface <uuid> stats
    Display interface instance stats for a logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx1> get logical-router a485769d-dc65-4197-b3c9-9a200033e3ea interface e2f2ee21-871a-4c39-8640-2501b9bb871d stats Logical Router Interface Stats --------------------------------------------------------------------------- RX Unicast Packets : 0 RX Unicast Bytes : 0 TX Unicast Packets : 0 TX Unicast Bytes : 0 RX Broadcast Packets : 0 RX Broadcast Bytes : 0 TX Broadcast Packets : 4 TX Broadcast Bytes : 240 RX Multicast Packets : 0 RX Multicast Bytes : 0 RX Packets System Error : 0 TX Ref Errors : 0 Packets Deferred Free : 0 RX Packets Dropped : 0 LIF IPv4 Net Statistics IP & ARP packets RX : 0 IP & ARP packets TX : 4 ... IPv6 Route not found to Dest : 0 Neighbor not found : 0
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> interface <uuid> stats ipv4
    Display interface instance stats for a logical router (ipv4).
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx1> get logical-router a485769d-dc65-4197-b3c9-9a200033e3ea interface e2f2ee21-871a-4c39-8640-2501b9bb871d stats ipv4 Logical Router Interface Stats --------------------------------------------------------------------------- RX Unicast Packets : 0 RX Unicast Bytes : 0 TX Unicast Packets : 0 TX Unicast Bytes : 0 RX Broadcast Packets : 0 RX Broadcast Bytes : 0 TX Broadcast Packets : 4 TX Broadcast Bytes : 240 RX Multicast Packets : 0 RX Multicast Bytes : 0 RX Packets System Error : 0 TX Ref Errors : 0 Packets Deferred Free : 0 RX Packets Dropped : 0 LIF IPv4 Net Statistics IP & ARP packets RX : 0 IP & ARP packets TX : 4 ... Route not found to Dest : 0 Neighbor not found : 0
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> interface <uuid> stats ipv6
    Display interface instance stats for a logical router (ipv6).
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx1> get logical-router a485769d-dc65-4197-b3c9-9a200033e3ea interface e2f2ee21-871a-4c39-8640-2501b9bb871d stats ipv6 Logical Router Interface Stats --------------------------------------------------------------------------- RX Unicast Packets : 0 RX Unicast Bytes : 0 TX Unicast Packets : 0 TX Unicast Bytes : 0 RX Broadcast Packets : 0 RX Broadcast Bytes : 0 TX Broadcast Packets : 4 TX Broadcast Bytes : 240 RX Multicast Packets : 0 RX Multicast Bytes : 0 RX Packets System Error : 0 TX Ref Errors : 0 Packets Deferred Free : 0 RX Packets Dropped : 0 LIF IPv6 Net Statistics IPv6 packets RX : 0 IPv6 packets TX : 0 ... IPv6 Route not found to Dest : 0 Neighbor not found : 0
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> interfaces
    Display interface information for the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 interfaces Logical Router Interfaces --------------------------------------------------------------------------- LIF UUID : c66fc321-df74-4aaa-835e-95dc815fe7ae Mode : ['Routing'] Overlay VNI : 27530 IP : 172.16.130.1 IP mask : 255.255.255.0 Mac : 02:50:56:56:44:52 Connected DVS : nsxvswitch Control plane enable : True Replication Mode : 0.0.0.1 State : ['Enabled'] Flags : 0x2288 DHCP relay : Not enable LIF UUID : be290c92-74ed-437c-bbf1-dd78673b6a5a Mode : ['Routing'] Overlay VNI : 25480 IP : 172.16.120.1 IP mask : 255.255.255.0 Mac : 02:50:56:56:44:52 Connected DVS : nsxvswitch Control plane enable : True Replication Mode : 0.0.0.1 State : ['Enabled'] Flags : 0x2288 DHCP relay : Not enable LIF UUID : f6ef3b50-64a0-4948-ab9e-9135963d4b8b Mode : ['Routing-Backplane'] Overlay VNI : 37768 IP : 169.0.0.1 IP mask : 255.255.255.240 Mac : 02:50:56:56:44:52 Connected DVS : nsxvswitch Control plane enable : True Replication Mode : 0.0.0.1 State : ['Enabled'] Flags : 0x12308 DHCP relay : Not enable LIF UUID : 3c139373-f8f7-441e-aac4-146d9b5ff3a6 Mode : ['Routing'] Overlay VNI : 11145 IP : 172.16.110.1 IP mask : 255.255.255.0 Mac : 02:50:56:56:44:52 Connected DVS : nsxvswitch Control plane enable : True Replication Mode : 0.0.0.1 State : ['Enabled'] Flags : 0x2388 DHCP relay : Not enable
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> interfaces
    Display all interfaces on the specified logical router.
    Option Description
    <uuid> Logical Router identifier
    Allowed pattern: ^[0-9]+$|^0x[0-9a-fA-F]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-router db6760b3-d9e2-44ef-b1c4-f56138665d71 interfaces Interface Type Id IP[] Urpf-Mode Admin-State-Up UUID sr-0-loopback-port UNSET 0 127.0.0.1/8 NONE true 00003300-0000-0000-0000-000000000005 bp-sr0-port VXSTT 15240 169.0.0.2/28 PORT_CHECK true 8b06827f-6325-4afd-b56d-6260ebf0a1a0 97458be5-bf5e-44f8-a6b0-9fc32be347fc VXSTT 41864 100.64.1.1/31 PORT_CHECK true 97458be5-bf5e-44f8-a6b0-9fc32be347fc
    Mode
    Basic
    Availability
    Controller

    get logical-router <uuid> interfaces
    Display interface information for the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get logical-router 091a05dc-8080-41a2-a56f-baf6d32fb512 interfaces Logical Router Interfaces ============================================================ Interface UUID : e1ce6498-b3ca-4000-a0f4-0734415044cf IP/Mask : 100.64.1.1/31 MAC Address : 02:50:56:00:00:03 VNI : 58248 Flag : 1 DHCP relay : Not enabled ============================================================ Interface UUID : d7c184c8-bf63-47c8-bf48-01836d0380e5 IP/Mask : 172.16.30.1/24 MAC Address : 02:50:56:56:44:52 VNI : 31624 Flag : 0 DHCP relay : 192.168.33.1, 2001::192:168:33:1 ============================================================ Interface UUID : 07607708-9bc7-46fc-8d14-fc016b9297da IP/Mask : 172.16.10.1/24 MAC Address : 02:50:56:56:44:52 VNI : 54152 Flag : 0 DHCP relay : Not enabled ============================================================ Interface UUID : b2d3d312-962e-4a79-864c-09304195b88a IP/Mask : 172.16.20.1/24 MAC Address : 02:50:56:56:44:52 VNI : 52104 Flag : 0 DHCP relay : 192.168.33.1, 2001::192:168:33:1 ============================================================
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-router <uuid> interfaces
    Display interface information for the specified logical router.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 interfaces Logical Router UUID VRF LR-ID Name Type 736a80e3-23f6-5a2d-81d6-bbefb2786666 0 0 R1 TUNNEL interfaces interface : 9fd3c667-32db-5921-aaad-7a88c80b5e9f ifuid : 258 mode : blackhole interface : 34ca595f-fa62-5ed4-afcc-a6ef0195d4ed ifuid : 261 mode : lif IP/Mask : 142.134.61.36/24 MAC : 00:0c:29:5a:96:2b VLAN id : untagged LS port : 238d7422-e488-5cee-9639-1894b8ab56e2 urpf-mode : NONE admin : up op_state : up MTU : 1600 interface : f322c6ca-4298-568b-81c7-a006ba6e6c88 ifuid : 257 mode : cpu
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> interfaces stats
    Display the interface statistics for the specified logical router.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router e9d3379d-aba7-4459-9262-18bc95eaeec1 interfaces stats Logical Router UUID : e9d3379d-aba7-4459-9262-18bc95eaeec1 VRF : 1 LR-ID : 1 name : R2 type : SERVICE_ROUTER_TIER0 Statistics Interface Type RX PKTS TX PKTS RX BYTES TX BYTES RX Drops TX Drops b83cb77f-ca34-595c-a3e1-76278f0dcb00 blackhole 0 0 0 0 0 0 4b115e5f-1395-54c3-aaf0-0de5736f99df cpu 8 0 648 0 8 0 6c427841-e151-4479-9184-4196cfcef3b6 lif 5563 11 1902546 462 5563 0 081e2e50-2f0e-42e1-8764-80a127dd3918 lif 0 0 0 0 0 0 00003300-0000-0000-0000-000000000002 loopback 8 0 648 0 8 0 Total 5579 11 1903842 462 5579 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> neighbor
    Display the neighbor table for the specified logical router.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 neighbor Logical Router UUID : d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 VRF : 6 LR-ID : 6 name : R3 type : DISTRIBUTED_ROUTER neighbor interface : c66fc321-df74-4aaa-835e-95dc815fe7ae IP : 172.16.130.13 MAC : 00:50:56:8e:3e:0b state : perm interface : f6ef3b50-64a0-4948-ab9e-9135963d4b8b IP : 169.0.0.2 MAC : 02:50:56:00:00:05 state : reach timeout : 7 interface : be290c92-74ed-437c-bbf1-dd78673b6a5a IP : 172.16.120.11 MAC : 00:50:56:8e:15:e5 state : reach timeout : 24 interface : 3c139373-f8f7-441e-aac4-146d9b5ff3a6 IP : 172.16.110.11 MAC : 00:50:56:8e:91:12 state : perm
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> neighbor <ip-or-mac-address>
    Display neighbor information (ARP/ND cache) for the specified logical router, using IP or MAC.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    <ip-or-mac-address> IP or MAC address
    Example
    esx-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 neighbor 172.16.130.1 Logical Routers Neighbors -------------------------------------------------------------------------------------------------------------- Flags Legend: [S: Static], [V: Valid], [P: Proxy], [I: Interface] [N: Nascent], [L: Local], [D: Deleted], [K: linKlif] Network Mac Flags State SrcPort Refcnt Lif UUID ================================================================================================================================= 172.16.130.1 02:50:56:56:44:52 VI permanent 0 1 c66fc321-df74-4aaa-835e-95dc815fe7ae
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> neighbor <ip-or-mac-address>
    Lookup neighbor in (ARP/ND cache) for the specified logical router, using IP or MAC address.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    <ip-or-mac-address> IP or MAC address
    Example
    kvm-1> get logical-router 1904e13f-757a-4f44-9f85-cb84678a1a16 neighbor 192.168.1.1 Logical Router Forwarding Table ============================================================ Prefix MAC State Timeout 192.168.1.1/24 02:50:56:56:44:52 Up 10
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-router <uuid> neighbor stats
    Display the neighbor table and statistics for the specified logical router.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 neighbor stats Logical Router UUID : d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 VRF : 6 LR-ID : 6 name : R3 type : DISTRIBUTED_ROUTER neighbor interface : c66fc321-df74-4aaa-835e-95dc815fe7ae IP : 172.16.130.13 MAC : 00:50:56:8e:3e:0b state : perm statistics TX-Packets : 0 TX-Fails : 0 TX-Solicits : 0 TX-Solicit-Fails : 0 RX-Solicits : 0 RX-Unsolicits : 0 interface : f6ef3b50-64a0-4948-ab9e-9135963d4b8b IP : 169.0.0.2 MAC : 02:50:56:00:00:05 state : reach timeout : 325 statistics TX-Packets : 1 TX-Fails : 0 TX-Solicits : 239 TX-Solicit-Fails : 0 RX-Solicits : 241 RX-Unsolicits : 0 interface : be290c92-74ed-437c-bbf1-dd78673b6a5a IP : 172.16.120.11 MAC : 00:50:56:8e:15:e5 state : reach timeout : 378 statistics TX-Packets : 6 TX-Fails : 0 TX-Solicits : 261 TX-Solicit-Fails : 0 RX-Solicits : 233 RX-Unsolicits : 0 interface : 3c139373-f8f7-441e-aac4-146d9b5ff3a6 IP : 172.16.110.11 MAC : 00:50:56:8e:91:12 state : perm statistics TX-Packets : 0 TX-Fails : 0 TX-Solicits : 0 TX-Solicit-Fails : 0 RX-Solicits : 0 RX-Unsolicits : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> neighbors
    Display arp entry information (ARP cache) for the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get logical-router d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 neighbors Logical Routers Neighbors -------------------------------------------------------------------------------------------------------------- Flags Legend: [S: Static], [V: Valid], [P: Proxy], [I: Interface] [N: Nascent], [L: Local], [D: Deleted], [K: linKlif] Network Mac Flags State SrcPort Refcnt Lif UUID ================================================================================================================================= 172.16.130.1 02:50:56:56:44:52 VI permanent 0 1 c66fc321-df74-4aaa-835e-95dc815fe7ae 172.16.120.1 02:50:56:56:44:52 VI permanent 0 1 be290c92-74ed-437c-bbf1-dd78673b6a5a 169.0.0.1 02:50:56:56:44:52 VI permanent 0 1 f6ef3b50-64a0-4948-ab9e-9135963d4b8b 169.0.0.2 02:50:56:00:00:05 V 498 83886128 2 f6ef3b50-64a0-4948-ab9e-9135963d4b8b 172.16.110.1 02:50:56:56:44:52 VI permanent 0 1 3c139373-f8f7-441e-aac4-146d9b5ff3a6 172.16.110.11 00:50:56:8e:91:12 VL 488 83886132 18 3c139373-f8f7-441e-aac4-146d9b5ff3a6 20000000:00000000:00000000:00000001 02:50:56:56:44:52 VI permanent 0 1 1c1a47f7-d314-4e74-a198-5568540e4284 fe8089db:00000000:005056ff:fe564452 02:50:56:56:44:52 VI permanent 0 1 1c1a47f7-d314-4e74-a198-5568540e4284
    Mode
    Basic
    Availability
    ESXi

    get logical-router <uuid> neighbors
    Display neighbor information (ARP cache) for the specified logical router.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get logical-router 1904e13f-757a-4f44-9f85-cb84678a1a16 neighbors Logical Router Forwarding Table ============================================================ Prefix MAC State Timeout 192.168.1.1/24 02:50:56:56:44:52 Up 10
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-router <uuid> route
    Display the routing table for the specified logical router.
    Option Description
    <uuid> Logical Router identifier
    Allowed pattern: ^[0-9]+$|^0x[0-9a-fA-F]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-router db6760b3-d9e2-44ef-b1c4-f56138665d71 route LR-Id Destination Next-Hop LR-Port-Id Blackhole Route-Type Admin-Distance Admin-State-Up Route-UUID 0x5 172.16.110.0/24 169.0.0.1 8b06827f-6325-4afd-b56d-6260ebf0a1a0 false NSX_CONNECTED 0 true 00000018-ac10-6e00-0000-000000000005 0x5 100.64.1.0/31 0.0.0.0 97458be5-bf5e-44f8-a6b0-9fc32be347fc false CONNECTED 0 true 0000001f-6440-0100-0000-000000000005 0x5 0.0.0.0/0 100.64.1.0 97458be5-bf5e-44f8-a6b0-9fc32be347fc false NSX_STATIC 3 true 00000000-0000-0000-0000-000000000005 0x5 172.16.120.0/24 169.0.0.1 8b06827f-6325-4afd-b56d-6260ebf0a1a0 false NSX_CONNECTED 0 true 00000018-ac10-7800-0000-000000000005 0x5 172.16.130.0/24 169.0.0.1 8b06827f-6325-4afd-b56d-6260ebf0a1a0 false NSX_CONNECTED 0 true 00000018-ac10-8200-0000-000000000005 0x5 169.0.0.0/28 0.0.0.0 8b06827f-6325-4afd-b56d-6260ebf0a1a0 false CONNECTED 0 true 0000001c-a900-0000-0000-000000000005
    Mode
    Basic
    Availability
    Controller

    get logical-router <uuid> route <prefix>
    Display a specific IPv4 route on the specified logical router.
    Option Description
    <uuid> Logical Router identifier
    Allowed pattern: ^[0-9]+$|^0x[0-9a-fA-F]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    <prefix> Network Address argument
    Example
    nsx-controller-1> get logical-router db6760b3-d9e2-44ef-b1c4-f56138665d71 route 172.16.120.0/24 LR-Id Destination Next-Hop LR-Port-Id Blackhole Route-Type Admin-Distance Admin-State-Up Route-UUID 0x5 172.16.120.0/24 169.0.0.1 8b06827f-6325-4afd-b56d-6260ebf0a1a0 false NSX_CONNECTED 0 true 00000018-ac10-7800-0000-000000000005
    Mode
    Basic
    Availability
    Controller

    get logical-router <uuid> route [<prefix>]
    Display the routing table for the specified logical router. You must specify a tier 0 service router in this command. Use the get logical-routers command to get a list of logical routers and their router types.

    Optionally specify a prefix or IPv6 address to display only the route used for that network.

    Option Description
    <uuid> Datapath UUID argument
    <prefix> Network Address argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be route 2002::/64 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 1 t1c> * 2002::/64 [3/0] via fca9:1c1c:96b2:e000::2, downlink-282, 00:56:03
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> route [<prefix>]
    Display the routing table for the specified logical router. You must specify a tier 0 service router in this command. Use the get logical-routers command to get a list of logical routers and their router types.

    Optionally specify a prefix or IPv4 address to display only the route used for that network.

    Option Description
    <uuid> Datapath UUID argument
    <prefix> Network Address argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be route 22.3.3.0/24 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 1 t0s> * 22.3.3.0/24 [103/0] via 50.50.50.10, uplink-273, 00:52:33
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> route bgp [<prefix>]
    Display IPv4 BGP routes for a specified prefix in RIB.
    Option Description
    <uuid> Datapath UUID argument
    <prefix> Network Address argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be route bgp 2.1.0.0/16 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 2 b > * 2.1.4.0/24 [20/0] via 40.40.40.10, uplink-276, 21:12:29 b > * 2.1.5.0/24 [20/0] via 90.90.90.10, uplink-282, 21:12:10
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> route connected [<prefix>]
    Display IPv4 Connected routes for a specified prefix in RIB.
    Option Description
    <uuid> Datapath UUID argument
    <prefix> Network Address argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be route connected 1.0.0.0/8 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 2 t0c> * 1.1.3.0/24 is directly connected, downlink-294, 21:17:14 t0c> * 1.2.3.0/24 is directly connected, downlink-297, 21:17:04
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> route static [<prefix>]
    Display IPv4 Static routes for a specified prefix in RIB.
    Option Description
    <uuid> Datapath UUID argument
    <prefix> Network Address argument
    Example
    nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be route static 1.1.0.0/16 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 2 t1c> * 1.1.2.0/24 [3/0] via 100.64.1.1, downlink-298, 21:10:43 t1c> * 1.1.1.0/25 [3/0] via 100.64.1.1, downlink-298, 21:10:43
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router <uuid> stats
    Display statistics for the specified logical router.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router 736a80e3-23f6-5a2d-81d6-bbefb2786666 stats Logical Router UUID : 736a80e3-23f6-5a2d-81d6-bbefb2786666 VRF : 0 LR-ID : 0 name : R1 type : TUNNEL Statistics Dropped No Memory : 0 Dropped No Route : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router interface <uuid>
    Display interface information for the specified logical router.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router interface 34ca595f-fa62-5ed4-afcc-a6ef0195d4ed interface : 34ca595f-fa62-5ed4-afcc-a6ef0195d4ed ifuid : 261 VRF : 736a80e3-23f6-5a2d-81d6-bbefb2786666 mode : lif IP/Mask : 142.134.61.36/24 MAC : 00:0c:29:5a:96:2b VLAN id : untagged LS port : 238d7422-e488-5cee-9639-1894b8ab56e2 urpf-mode : NONE admin : up op_state : up MTU : 1600
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router interface <uuid> arp-proxy
    Display ARP proxy for a logical router port.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router interface 1faf61ce-9da1-4aad-a8c6-80abd02c7e33 arp-proxy interface : 1faf61ce-9da1-4aad-a8c6-80abd02c7e33 ifuid : 274 VRF : be3543f5-7b8c-4888-b9ef-5a5ffbf09686 name : UPLINK_PLR_SR1 mode : lif MAC : 02:00:29:10:43:07 admin : up op_state : up arp_proxy : 40.40.10.60, 40.40.10.50, 40.40.10.55 : 40.40.10.100, 40.40.10.110
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router interface <uuid> neighbor
    Display the neighbor table for the specified logical router interface.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router interface 3c139373-f8f7-441e-aac4-146d9b5ff3a6 neighbor interface : 3c139373-f8f7-441e-aac4-146d9b5ff3a6 IP : 172.16.110.12 MAC : 00:0c:29:4d:09:19 state : perm interface : 3c139373-f8f7-441e-aac4-146d9b5ff3a6 IP : 172.16.110.11 MAC : 00:50:56:8e:91:12 state : perm
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router interface <uuid> stats
    Display statistics for the specified logical router interface.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-router interface 6c427841-e151-4479-9184-4196cfcef3b6 stats interface : 6c427841-e151-4479-9184-4196cfcef3b6 ifuid : 266 VRF : e9d3379d-aba7-4459-9262-18bc95eaeec1 IP/Mask : 172.20.1.60/24 MAC : 00:0c:29:5a:96:2b VLAN id : 101 LS port : 986ab7c0-acda-465f-8cda-1b9b84cd2518 urpf-mode : STRICT_MODE admin : up op_state : up MTU : 1600 statistics RX-Packets : 1331 RX-Bytes : 455202 RX-Drops : 1331 Blocked : 0 DST-Unsupported: 1331 Firewall : 0 Malformed : 0 No-Receiver : 0 No-Route : 0 RPF-Check : 0 Protocol-Unsupported: 0 IPv6 : 0 Port-Unsupported: 0 TTL-Exceeded: 0 Kni : 0 IPsec : 0 IPsec-NoSA : 0 IPsec-NoVTI : 0 TX-Packets : 11 TX-Bytes : 462 TX-Drops : 0 Blocked : 0 Firewall : 0 Frag-Needed : 0 No-ARP : 0 No-Memory : 0 No-Linked-Port: 0 IPsec : 0 IPsec-NoSA : 0 IPsec-NoVTI : 0 IPsec-Policy-Error: 0 IPsec-Policy-Block: 0 IP Ressemble Fragments-OK: 0 Fragemnts-Error: 0 Fragments-Timeout: 0 IP Fragment Fragments-OK: 0 Fragments-Error: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router interfaces
    Display information for all logical router interfaces.
    Example
    nsx-edge-1> get logical-router interfaces interface : 9fd3c667-32db-5921-aaad-7a88c80b5e9f ifuid : 258 VRF : 736a80e3-23f6-5a2d-81d6-bbefb2786666 mode : blackhole interface : 34ca595f-fa62-5ed4-afcc-a6ef0195d4ed ifuid : 261 VRF : 736a80e3-23f6-5a2d-81d6-bbefb2786666 mode : lif IP/Mask : 142.134.61.36/24 MAC : 00:0c:29:5a:96:2b VLAN id : untagged LS port : 238d7422-e488-5cee-9639-1894b8ab56e2 urpf-mode : NONE admin : up op_state : up MTU : 1600 interface : f322c6ca-4298-568b-81c7-a006ba6e6c88 ifuid : 257 VRF : 736a80e3-23f6-5a2d-81d6-bbefb2786666 mode : cpu interface : b83cb77f-ca34-595c-a3e1-76278f0dcb00 ifuid : 265 VRF : e9d3379d-aba7-4459-9262-18bc95eaeec1 mode : blackhole interface : 4b115e5f-1395-54c3-aaf0-0de5736f99df ifuid : 264 VRF : e9d3379d-aba7-4459-9262-18bc95eaeec1 mode : cpu interface : 6c427841-e151-4479-9184-4196cfcef3b6 ifuid : 266 VRF : e9d3379d-aba7-4459-9262-18bc95eaeec1 mode : lif IP/Mask : 172.20.1.60/24 MAC : 00:0c:29:5a:96:2b VLAN id : 101 LS port : 986ab7c0-acda-465f-8cda-1b9b84cd2518 urpf-mode : STRICT_MODE admin : up op_state : up MTU : 1600
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router interfaces stats
    Display statistics for all logical router interfaces.
    Example
    nsx-edge-1> get logical-router interfaces stats interface : 34ca595f-fa62-5ed4-afcc-a6ef0195d4ed ifuid : 261 VRF : 736a80e3-23f6-5a2d-81d6-bbefb2786666 IP/Mask : 142.134.61.36/24 MAC : 00:0c:29:5a:96:2b VLAN id : untagged LS port : 238d7422-e488-5cee-9639-1894b8ab56e2 urpf-mode : NONE admin : up op_state : up MTU : 1600 statistics RX-Packets : 768 RX-Bytes : 53788 RX-Drops : 210 Blocked : 0 DST-Unsupported: 21 Firewall : 0 Malformed : 0 No-Receiver : 0 No-Route : 0 RPF-Check : 0 Protocol-Unsupported: 101 IPv6 : 87 Port-Unsupported: 0 TTL-Exceeded: 0 Kni : 0 IPsec : 0 IPsec-NoSA : 0 IPsec-NoVTI : 0 TX-Packets : 11 TX-Bytes : 462 TX-Drops : 0 Blocked : 0 Firewall : 0 Frag-Needed : 0 No-ARP : 0 No-Memory : 0 No-Linked-Port: 0 IPsec : 0 IPsec-NoSA : 0 IPsec-NoVTI : 0 IPsec-Policy-Error: 0 IPsec-Policy-Block: 0 IP Ressemble Fragments-OK: 0 Fragemnts-Error: 0 Fragments-Timeout: 0 IP Fragment Fragments-OK: 0 Fragments-Error: 0 interface : 6c427841-e151-4479-9184-4196cfcef3b6 ifuid : 266 VRF : e9d3379d-aba7-4459-9262-18bc95eaeec1 IP/Mask : 172.20.1.60/24 MAC : 00:0c:29:5a:96:2b VLAN id : 101 LS port : 986ab7c0-acda-465f-8cda-1b9b84cd2518 urpf-mode : STRICT_MODE admin : up op_state : up MTU : 1600 statistics RX-Packets : 1313 RX-Bytes : 449046 RX-Drops : 1313 Blocked : 0 DST-Unsupported: 1313 Firewall : 0 Malformed : 0 No-Receiver : 0 No-Route : 0 RPF-Check : 0 Protocol-Unsupported: 0 IPv6 : 0 Port-Unsupported: 0 TTL-Exceeded: 0 Kni : 0 IPsec : 0 IPsec-NoSA : 0 IPsec-NoVTI : 0 TX-Packets : 11 TX-Bytes : 462 TX-Drops : 0 Blocked : 0 Firewall : 0 Frag-Needed : 0 No-ARP : 0 No-Memory : 0 No-Linked-Port: 0 IPsec : 0 IPsec-NoSA : 0 IPsec-NoVTI : 0 IPsec-Policy-Error: 0 IPsec-Policy-Block: 0 IP Ressemble Fragments-OK: 0 Fragemnts-Error: 0 Fragments-Timeout: 0 IP Fragment Fragments-OK: 0 Fragments-Error: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router neighbor
    Display the neighbor table for all logical router interfaces.
    Example
    nsx-edge-1> get logical-router neighbor interface : 8d655fb8-fc5e-5c08-90f5-15de973a9c77 IP : 192.168.250.61 MAC : 00:50:56:62:58:be state : reach timeout : 287 interface : 4b3be9e1-1363-4a85-ac13-8f7ad5b1e842 IP : 192.168.130.1 MAC : 68:ef:bd:4e:98:7f state : reach timeout : 309 interface : ef76622f-52ea-425f-b7c9-6264bf11b667 IP : 169.0.0.2 MAC : 02:50:56:00:00:02 state : reach timeout : 425 interface : c66fc321-df74-4aaa-835e-95dc815fe7ae IP : 172.16.130.13 MAC : 00:50:56:8e:3e:0b state : perm interface : f6ef3b50-64a0-4948-ab9e-9135963d4b8b IP : 169.0.0.2 MAC : 02:50:56:00:00:05 state : reach timeout : 397 . . .
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-router routes <prefix>
    Display specific IPv4 routes from all the logical routers.
    Option Description
    <prefix> Network Address argument
    Example
    nsx-controller-1> get logical-router routes 172.16.120.0/24 LR-Id Destination Next-Hop LR-Port-Id Blackhole Route-Type Admin-Distance Admin-State-Up Route-UUID 0x5 172.16.120.0/24 169.0.0.1 8b06827f-6325-4afd-b56d-6260ebf0a1a0 false NSX_CONNECTED 0 true 00000018-ac10-7800-0000-000000000005
    Mode
    Basic
    Availability
    Controller

    get logical-routers
    Display information about all logical routers.
    Example
    nsx-edge-1> get logical-routers Logical Router UUID VRF LR-ID Name Type Ports 736a80e3-23f6-5a2d-81d6-bbefb2786666 0 0 R1 TUNNEL 3 e9d3379d-aba7-4459-9262-18bc95eaeec1 1 1 R2 SERVICE_ROUTER_TIER0 5
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-routers
    Display information about all logical routers.
    Example
    nsx-controller-1> get logical-routers LR-Id LR-Name Hosts[] Service-Controller Router-Type ClusterId UUID 0x5 SR-46740ffe-9bf1-406e-816d-e200a45f0707 192.168.110.111 192.168.110.108 SERVICE_ROUTER_TIER1 00002000-0000-0000-0000-000000000001 db6760b3-d9e2-44ef-b1c4-f56138665d71 192.168.110.112 0x2 DR-ef64d966-56f0-4f3f-bb02-16d07de74b5c 192.168.110.111 192.168.110.108 DISTRIBUTED_ROUTER N/A ef64d966-56f0-4f3f-bb02-16d07de74b5c 192.168.110.112 0x1 DR-46740ffe-9bf1-406e-816d-e200a45f0707 192.168.110.111 192.168.110.108 DISTRIBUTED_ROUTER N/A 46740ffe-9bf1-406e-816d-e200a45f0707 192.168.210.52 192.168.110.112 192.168.210.51 0x3 SR-ef64d966-56f0-4f3f-bb02-16d07de74b5c 192.168.110.111 192.168.110.108 SERVICE_ROUTER_TIER0 00002000-0000-0000-0000-000000000002 19772688-b220-4a34-94a3-8a094dcdd979 0x4 SR-ef64d966-56f0-4f3f-bb02-16d07de74b5c 192.168.110.112 192.168.110.108 SERVICE_ROUTER_TIER0 00002000-0000-0000-0000-000000000002 2d1667ba-ed4a-49d0-8a1d-cd8a77c324bc
    Mode
    Basic
    Availability
    Controller

    get logical-routers
    Display information about logical routers on this hypervisor host.
    Example
    esx-1> get logical-routers Logical Routers Summary ------------------------------------------------------------ VDR UUID LIF num Route num d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 4 7
    Mode
    Basic
    Availability
    ESXi

    get logical-routers
    Display information about logical routers asscociated with the VIF on this public cloud host.
    Example
    host-1> get logical-routers Host Logical Routers Summary ====================================================================== Router UUID ID Port Count 091a05dc-8080-41a2-a56f-baf6d32fb512 32769 1
    Mode
    Basic
    Availability
    NSX Cloud VM

    get logical-routers
    Display information about logical routers on this hypervisor host.
    Example
    kvm-1> get logical-routers Logical Routers Summary ====================================================================== Router UUID ID Port Count 091a05dc-8080-41a2-a56f-baf6d32fb512 32769 4 c8e5b716-fbb2-44e9-8c69-e61db332c418 40961 3
    Mode
    Basic
    Availability
    KVM

    get logical-routers stats
    Display statistics for all logical routers.
    Example
    nsx-edge-1> get logical-router stats Logical Router UUID : 736a80e3-23f6-5a2d-81d6-bbefb2786666 VRF : 0 LR-ID : 0 name : R1 type : TUNNEL Statistics Dropped No Memory : 0 Dropped No Route : 0 Logical Router UUID : e9d3379d-aba7-4459-9262-18bc95eaeec1 VRF : 1 LR-ID : 1 name : R2 type : SERVICE_ROUTER_TIER0 Statistics Dropped No Memory : 0 Dropped No Route : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-service binding <uuid>
    Display a specific logical service binding.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get logical-service binding 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d DHCP_ID: 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d ID: 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d LOG_SWITCH_PORT_ID: 60905155-4378-4902-8528-7231a2f6d736 SERVICE_TYPE: DHCP
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-service bindings
    Display all logical service bindings.
    Example
    nsx-edge-1> get logical-service bindings DHCP_ID: 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d ID: 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d LOG_SWITCH_PORT_ID: 60905155-4378-4902-8528-7231a2f6d736 SERVICE_TYPE: DHCP
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-service port <uuid> [stats]
    Display information for the specified logical service port. Optionally specify an argument to display the statistics.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-service port b836eacf-3d1c-5fc9-ab18-19dc0015a57e lservice-port: b836eacf-3d1c-5fc9-ab18-19dc0015a57e ifuid : 262 service-type: dhcp IP : 192.168.110.50 MAC : 00:50:56:98:7d:d7 attach-port : 60905155-4378-4902-8528-7231a2f6d736 nsx-edge-1> get logical-service port b836eacf-3d1c-5fc9-ab18-19dc0015a57e stats lservice-port: b836eacf-3d1c-5fc9-ab18-19dc0015a57e ifuid : 262 service-type: dhcp Statistics RX-Packets : 16 RX-Bytes : 1080 RX-Drops : 0 Slowpath : 0 Kni : 0 Malformed : 0 No-DHCP-Server: 0 No-Match : 0 TX-Packets : 10 TX-Bytes : 420 TX-Drops : 0 No-Memory : 0 No-Linked-Port: 0 nsx-edge-1> get logical-service port 80e93dd3-0eab-5f8a-96c5-80846c3711b5 stats lservice-port: 80e93dd3-0eab-5f8a-96c5-80846c3711b5 ifuid : 276 service-type: mdproxy status : UP listen_status: UP monitor_status: UP err_msg : Statistics requests_from_clients : 5 requests_to_nova_server : 5 responses_to_clients : 5 succeeded_responses_from_nova_server: 4 error_responses_from_nova_server: 1 RX-Packets : 0 RX-Bytes : 0 RX-Drops : 0 Slowpath : 0 Kni : 0 Malformed : 0 No-DHCP-Server: 0 No-Match : 0 TX-Packets : 10 TX-Bytes : 420 TX-Drops : 0 No-Memory : 0 No-Linked-Port: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-service ports [stats]
    Display information for all logical service ports. Optionally specify an argument to display the statistics.
    Example
    nsx-edge-1> get logical-service ports lservice-port: b836eacf-3d1c-5fc9-ab18-19dc0015a57e ifuid : 262 service-type: dhcp IP : 192.168.110.50 MAC : 00:50:56:98:7d:d7 attach-port : 60905155-4378-4902-8528-7231a2f6d736 nsx-edge-1> get logical-service ports stats lservice-port: b836eacf-3d1c-5fc9-ab18-19dc0015a57e ifuid : 262 service-type: dhcp Statistics RX-Packets : 16 RX-Bytes : 1080 RX-Drops : 0 Slowpath : 0 Kni : 0 Malformed : 0 No-DHCP-Server: 0 No-Match : 0 TX-Packets : 10 TX-Bytes : 420 TX-Drops : 0 No-Memory : 0 No-Linked-Port: 0 lservice-port: 80e93dd3-0eab-5f8a-96c5-80846c3711b5 ifuid : 276 service-type: mdproxy status : ERROR listen_status: UP monitor_status: ERROR err_msg : backend nova server connection is broken with reason: Connect to Peer Failure; Statistics requests_from_clients : 5 requests_to_nova_server : 5 responses_to_clients : 5 succeeded_responses_from_nova_server: 4 error_responses_from_nova_server: 1 RX-Packets : 0 RX-Bytes : 0 RX-Drops : 0 Slowpath : 0 Kni : 0 Malformed : 0 No-DHCP-Server: 0 No-Match : 0 TX-Packets : 10 TX-Bytes : 420 TX-Drops : 0 No-Memory : 0 No-Linked-Port: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-service state <uuid>
    Display the state of a specific logical service.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get logical-service state 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d ID: 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d NODE_ID: 3284f707-98f9-4e7c-b573-f7898dfa12ba NODE_RANK: 0 PEER_MGMT_IP: IPV4: 192.168.110.101 STATE: ACTIVE
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-service states
    Display the state of all logical services.
    Example
    nsx-edge-1> get logical-service states ID: 8bc04d52-b1f9-4258-8d13-b8fdbf031a0d NODE_ID: 3284f707-98f9-4e7c-b573-f7898dfa12ba NODE_RANK: 0 PEER_MGMT_IP: IPV4: 192.168.110.101 STATE: ACTIVE
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch <logical-switch-id>
    Display information about the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    kvm-1> get logical-switch 0a8cb2ab-d15b-4b46-a6ee-0a1cd29be34d Logical Switch ======================================================= UUID : 0a8cb2ab-d15b-4b46-a6ee-0a1cd29be34d VNI/VLAN : 31624 Is VLAN backed : True Replication mode: mtep Controller IP : 192.168.110.51 Link status : Up VIF count : 1 MAC entry count : 0 TEP entry count : 4 ARP entry count : 0
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-switch <logical-switch-id>
    Display information about the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    esx-1> get logical-switch bf543c67-3ffe-44dd-a1d3-57e7cd2e0aff Logical Switch ----------------------------------------------------------------- Host Kernel Entry ================================================== DVS name : nsxvswitch VNI : 11145 Multicast IP : 0.0.0.1 Multicast proxy enable : True ARP proxy enable : True CP connection up : True Controller IP : 192.168.110.108 MAC entry count : 2 ARP entry count : 0 VIF entry count : 2 MTEP entry count : 0 LCP Entry ================================================================= Logical switch UUID : bf543c67-3ffe-44dd-a1d3-57e7cd2e0aff VNI : 11145 Replication mode : unicast mtep Transport binding : None Vlan ID : None Admin state up : True
    Mode
    Basic
    Availability
    ESXi

    get logical-switch <logical-switch-id> arp-table
    Display the ARP table for the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    esx-1> get logical-switch bf543c67-3ffe-44dd-a1d3-57e7cd2e0aff arp-table Logical Switch ARP Table -------------------------------------------------- Host Kernel Entry ================================================== IP MAC Flags LCP Remote Entry ================================================== IP MAC LCP Local Entry ================================================== IP MAC 172.16.110.11 00:50:56:8e:91:12 172.16.110.12 00:0c:29:4d:09:19
    Mode
    Basic
    Availability
    ESXi

    get logical-switch <logical-switch-id> arp-table
    Display the ARP table for the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    kvm-1> get logical-switch 29576 arp-table Logical Switch ARP Table ================================================== IP MAC 10.144.13.29 00:01:02:03:42:11
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-switch <logical-switch-id> mac-table
    Display the MAC table for the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    esx-1> get logical-switch bf543c67-3ffe-44dd-a1d3-57e7cd2e0aff mac-table Logical Switch MAC Table --------------------------------------------------------------------------- Host Kernel Entry =========================================================================== Inner MAC Outer MAC Outer IP Flags 02:50:56:56:44:52 02:50:56:00:00:00 192.168.250.60 0xd 00:50:56:8e:3e:0b 00:50:56:62:58:be 192.168.250.61 0xf LCP Remote Entry =========================================================================== Inner MAC Outer MAC Outer IP LCP Local Entry =========================================================================== Inner MAC Outer MAC Outer IP 00:50:56:8e:91:12 00:50:56:69:ba:80 192.168.250.62 00:0c:29:4d:09:19 00:50:56:69:ba:80 192.168.250.62
    Mode
    Basic
    Availability
    ESXi

    get logical-switch <logical-switch-id> mac-table
    Display the MAC table for the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    kvm-1> get logical-switch 29576 mac-table Logical Switch MAC Table ============================================================ MAC VTEP Label 00:01:02:00:00:03 124928 00:01:02:00:00:04 124928
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-switch <logical-switch-id> nd-table
    Display the ND table for the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    esx-1> get logical-switch bf543c67-3ffe-44dd-a1d3-57e7cd2e0aff nd-table Logical Switch ND Table --------------------------------------------------------------------------- Host Kernel Entry =========================================================================== IP MAC Flags 2001:bd6::c:2957:201:51 00:0c:29:dc:80:b5 0x3 LCP Remote Entry =========================================================================== IP MAC 2001:bd6::c:2957:201:51 00:0c:29:dc:80:b5 fe80::20c:29ff:fedc:80b5 00:0c:29:dc:80:b5 LCP Local Entry =========================================================================== IP MAC 2001:bd6::c:2957:192:212 00:0c:29:f8:cb:9f fe80::20c:29ff:fef8:cb9f 00:0c:29:f8:cb:9f
    Mode
    Basic
    Availability
    ESXi

    get logical-switch <logical-switch-id> ports
    Display ports on the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    kvm-1> get logical-switch 0a8cb2ab-d15b-4b46-a6ee-0a1cd29be34d ports Logical Switch Ports ============================================================ Port UUID : 59d3da36-d5f8-43d0-bca0-ae98c593861c Status : up VIF UUID : 57601300-2e82-48c4-8c27-1e961ac70e81 Snoop Mode : dhcp ============================================================
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-switch <logical-switch-id> vtep
    Display the VTEP table for the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    kvm-1> get logical-switch 0a8cb2ab-d15b-4b46-a6ee-0a1cd29be34d vtep Logical Switch VTEP Table ============================== Label VTEP IP 114689 192.168.140.154 2049 192.168.140.153 102401 192.168.150.151 79873 192.168.150.152
    Mode
    Basic
    Availability
    KVM, NSX Cloud VM

    get logical-switch <logical-switch-id> vtep-table
    Display the VTEP table for the specified logical switch.
    Option Description
    <logical-switch-id> Logical switch identifier UUID, VNI or vlan:VLAN-ID
    Example
    esx-1> get logical-switch bf543c67-3ffe-44dd-a1d3-57e7cd2e0aff vtep-table Logical Switch VTEP Table ----------------------------------------------------------------------------------------------- Host Kernel Entry =============================================================================================== Label VTEP IP Segment ID Is MTEP VTEP MAC BFD count 114689 192.168.250.60 192.168.250.0 False 02:50:56:00:00:00 1 40961 192.168.250.61 192.168.250.0 False 00:50:56:62:58:be 1 LCP Remote Entry =============================================================================================== Label VTEP IP Segment ID VTEP MAC DEVICE NAME 114689 192.168.250.60 192.168.250.0 02:50:56:00:00:00 None 40961 192.168.250.61 192.168.250.0 00:50:56:62:58:be None LCP Local Entry =============================================================================================== Label VTEP IP Segment ID VTEP MAC DEVICE NAME 36865 192.168.250.62 192.168.250.0 00:50:56:69:ba:80 None
    Mode
    Basic
    Availability
    ESXi

    get logical-switch <uuid>
    Display information about the specified logical switch.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c Logical Switch UUID : 857212c6-3d87-4a4a-9700-0c9d23f74f1c VNI : 5000 ENCAP : STT Replication : mtep routing-domain: 00000007-0000-0000-0000-000000000000
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch <uuid> mac-address-table
    Display the mac address table for the specified logical switch.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c mac-address-table Logical Switch UUID : 857212c6-3d87-4a4a-9700-0c9d23f74f1c VNI : 5000 ENCAP : STT Replication : mtep routing-domain: 00000007-0000-0000-0000-000000000000 MAC-Table: MAC : 00:50:56:8e:9a:a5 Tunnel : d87cd7e0-eb91-5dd5-bae4-ceb0a2760bfa IFUID : 295 LOCAL : 192.168.250.162 REMOTE : 192.168.250.160 ENCAP : STT MAC : 02:50:56:56:44:52 Port : bbe56ae2-0bc1-46c0-b334-a241e2a56193 IFUID : 280 MAC : 00:50:56:8e:1b:21 Tunnel : 6598ab27-95c6-50ef-85b3-89b7811ab672 IFUID : 296 LOCAL : 192.168.250.162 REMOTE : 192.168.250.161 ENCAP : STT MAC : 04:00:c0:a8:fa:a2 Port : bbe56ae2-0bc1-46c0-b334-a241e2a56193 IFUID : 280
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch <uuid> ports
    Display port information for the specified logical switch.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c ports LogSwitchPort-ID LogSwitch-ID Child-UUID Child-EntityType TransportNode-ID 335bbfdc-d6d6-4d87-8fb1-b98614fff1d8 857212c6-3d87-4a4a-9700-0c9d23f74f1c c78a1655-228c-493b-88cf-6b77dafe908d VIF 857212c6-3d87-4a4a-9700-0c9d23f74f1c 593d2540-bb7b-4abe-ad78-8727ebd5c1d2 857212c6-3d87-4a4a-9700-0c9d23f74f1c null LOG_SWITCH 857212c6-3d87-4a4a-9700-0c9d23f74f1c abcd12c6-3d87-4a4a-9700-0c9d23f74f1c
    Mode
    Basic
    Availability
    Controller

    get logical-switch <uuid> ports
    Display port information for the specified logical switch.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c ports Logical Switch UUID : 857212c6-3d87-4a4a-9700-0c9d23f74f1c VNI : 5000 ENCAP : STT Replication : mtep routing-domain: 00000007-0000-0000-0000-000000000000 Ports Port : bbe56ae2-0bc1-46c0-b334-a241e2a56193 IFUID : 280 Peer : 70b21c84-cf3b-4fc3-a442-a941ba86ef48
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch <uuid> ports stats
    Display port statistics for the specified logical switch.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-switch 973b00a2-3be8-4e01-9824-3c6b7e2bf690 ports stats Logical Switch UUID : 973b00a2-3be8-4e01-9824-3c6b7e2bf690 VLAN : 100 device : fp-eth0 IFUID : 0 Ports Port : 783a05cd-033d-4891-ad11-7c082641e069 RX-Packets : 8690 RX-Bytes : 587073 RX-Drops : 0 Malformed : 0 No-Match : 0 L2-Loop : 0 TX-Packets : 10188 TX-Bytes : 687181 TX-Drops : 0 No-Memory : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch <uuid> tunnel-ports
    Display the tunnel information for the specified logical switch.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c tunnel-ports Logical Switch UUID : 857212c6-3d87-4a4a-9700-0c9d23f74f1c VNI : 5000 ENCAP : STT Replication : mtep routing-domain: 00000007-0000-0000-0000-000000000000 Tunnels Tunnel : d87cd7e0-eb91-5dd5-bae4-ceb0a2760bfa IFUID : 295 LOCAL : 192.168.250.162 REMOTE : 192.168.250.160 ENCAP : STT Tunnel : 6598ab27-95c6-50ef-85b3-89b7811ab672 IFUID : 296 LOCAL : 192.168.250.162 REMOTE : 192.168.250.161 ENCAP : STT
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch <uuid> vtep-table
    Display the tunnel endpoint table for the specified logical switch.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c vtep-table Logical Switch UUID : 857212c6-3d87-4a4a-9700-0c9d23f74f1c VNI : 5000 ENCAP : STT Replication : mtep routing-domain: 00000007-0000-0000-0000-000000000000 Replication Tunnels Tunnel : d87cd7e0-eb91-5dd5-bae4-ceb0a2760bfa IFUID : 295 LOCAL : 192.168.250.162 REMOTE : 192.168.250.160 ENCAP : STT MTEP : False Tunnel : 6598ab27-95c6-50ef-85b3-89b7811ab672 IFUID : 296 LOCAL : 192.168.250.162 REMOTE : 192.168.250.161 ENCAP : STT MTEP : False
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch <vni-or-uuid>
    Display information about the specified logical switch. Use the get logical-switches command to get a list of all logical switches. You can use the VNI or UUID to specify the logical switch.
    Option Description
    <vni-or-uuid> VNI or UUID argument
    Allowed pattern: ^[0-9]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c VNI UUID 5000 857212c6-3d87-4a4a-9700-0c9d23f74f1c or nsx-controller-1> get logical-switch 5000 VNI UUID 5000 857212c6-3d87-4a4a-9700-0c9d23f74f1c
    Mode
    Basic
    Availability
    Controller

    get logical-switch <vni-or-uuid> arp-table
    Display the ARP table for the specified logical switch.
    Option Description
    <vni-or-uuid> VNI or UUID argument
    Allowed pattern: ^[0-9]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c arp-table VNI IP MAC TransportNodeId 5000 172.16.130.12 00:50:56:8e:1b:21 857212c6-3d87-5d5d-9700-0c9d23f74f1d
    Mode
    Basic
    Availability
    Controller

    get logical-switch <vni-or-uuid> mac-table
    Display the MAC address table for the specified logical switch.
    Option Description
    <vni-or-uuid> VNI or UUID argument
    Allowed pattern: ^[0-9]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c mac-table VNI MAC VTEP-IP TransportNodeId 5000 00:50:56:8e:1b:21 192.168.250.161 957612c6-4321-4a4a-9700-0c9d23f74f1c 5000 00:50:56:8e:9a:a5 192.168.250.160 857212c6-3d87-5d5d-9700-0c9d23f74f1d
    Mode
    Basic
    Availability
    Controller

    get logical-switch <vni-or-uuid> stats
    Display statistics information about the specified logical switch.
    Option Description
    <vni-or-uuid> VNI or UUID argument
    Allowed pattern: ^[0-9]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c stats LogSwitchFibMsg.vtep.update 4 LogSwitchFibMsg.vtep.remove 4 LogSwitchFibMsg.vtep.size 4 LogSwitchFibMsg.mac.update 4 LogSwitchFibMsg.mac.remove 4 LogSwitchFibMsg.mac.size 4 LogSwitchFibMsg.ip.update 4 LogSwitchFibMsg.ip.remove 4 LogSwitchFibMsg.ip.size 4
    Mode
    Basic
    Availability
    Controller

    get logical-switch <vni-or-uuid> transport-node-table
    Display transport nodes which joined a given logical switch.
    Option Description
    <vni-or-uuid> VNI or UUID argument
    Allowed pattern: ^[0-9]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c transport-node-table TransportNodeId 857212c6-3d87-4a4a-9700-0c9d23f74f1c 857212c6-3d87-3d3d-9700-0c9d23f74f1d 857212c6-3d87-5c5c-9700-0c9d23f74f1f
    Mode
    Basic
    Availability
    Controller

    get logical-switch <vni-or-uuid> vtep
    Display all virtual tunnel end points related to the specified logical switch.
    Option Description
    <vni-or-uuid> VNI or UUID argument
    Allowed pattern: ^[0-9]+$|^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-switch 857212c6-3d87-4a4a-9700-0c9d23f74f1c vtep VNI IP LABEL Segment MAC TransportNodeId 5000 192.168.250.163 0x18801 192.168.250.0 04:00:c0:a8:fa:a3 857212c6-3d87-4a4a-9700-0c9d23f74f1c 5000 192.168.250.162 0xC801 192.168.250.0 04:00:c0:a8:fa:a2 857212c6-3d87-4a4a-9700-0c9d23f74f1d 5000 192.168.250.161 0x3001 192.168.250.0 00:50:56:62:af:a4 857212c6-3d87-4a4a-9700-0c9d23f74f1e 5000 192.168.250.160 0xF001 192.168.250.0 00:50:56:67:4b:95 857212c6-3d87-4a4a-9700-0c9d23f74f1f
    Mode
    Basic
    Availability
    Controller

    get logical-switch port <uuid>
    Display port information for the specified logical switch.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-switch port bbe56ae2-0bc1-46c0-b334-a241e2a56193 Port : bbe56ae2-0bc1-46c0-b334-a241e2a56193 IFUID : 280 Logical Switch: 857212c6-3d87-4a4a-9700-0c9d23f74f1c Peer : 70b21c84-cf3b-4fc3-a442-a941ba86ef48
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch port <uuid> stats
    Display statistics for the specified logical switch port.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge-1> get logical-switch port 783a05cd-033d-4891-ad11-7c082641e069 stats Port : 783a05cd-033d-4891-ad11-7c082641e069 RX-Packets : 4474 RX-Bytes : 302966 RX-Drops : 0 Malformed : 0 No-Match : 0 L2-Loop : 0 TX-Packets : 5527 TX-Bytes : 371568 TX-Drops : 0 No-Memory : 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch ports
    Display ports for all logical switches.
    Example
    nsx-edge-1> get logical-switch ports Port : 18c26214-ab90-45ab-a2e0-78de070f9eb6 IFUID : 279 Peer : 8c4f10d5-9c4e-40a2-b239-e2eae7d39a33 Port : 271d49b0-f052-4c0c-a79f-44636229e471 IFUID : 264 Peer : a62432b5-68e7-4f95-a3f8-1b63ee4b102a Port : 7bd1dd3d-97eb-5312-9d0d-b26c148a4fac IFUID : 261 Peer : c2a03cab-3bad-56f3-b5ae-442ad6599bcf Port : bbe56ae2-0bc1-46c0-b334-a241e2a56193 IFUID : 280 Peer : 70b21c84-cf3b-4fc3-a442-a941ba86ef48 Port : 58845bb9-19fc-4ec2-826f-bcbe871f99b5 IFUID : 282 Peer : e4be0c73-57bc-4b4f-b10c-f3f858ff8ccc Port : 783a05cd-033d-4891-ad11-7c082641e069 IFUID : 276 Peer : aaec58d9-5dca-49c7-b39e-cdd8cd75901d Port : 4ca7839f-2308-43f0-a799-f82d3911c134 IFUID : 287 Peer : 3fe772aa-8594-47cf-8a3e-20a26081ba15 Port : fe9c5ba9-3641-497f-ab95-046ffbc9356f IFUID : 275 Peer : c7bbfc17-fbb9-4a39-a04b-0df93d788b57 Port : 1ff51f67-9ffb-446a-ae08-0a4a74adbf29 IFUID : 274 Peer : d37160fc-6e17-4c5c-8af1-54064c480798 Port : 286d2aad-ad4e-4ad6-b6c6-5256f38e9265 IFUID : 286 Peer : 6da71663-ce1a-4c2a-8557-ecfd85f031f5 Port : 93e656e1-0625-4ec2-b34c-98f2774bc8d3 IFUID : 281 Peer : 6c03a210-75b7-4a0d-8d66-cedf3c3f0750
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch ports stats
    Display port statistics for all logical switches.
    Example
    nsx-edge-1> get logical-switch ports stats Port : 18c26214-ab90-45ab-a2e0-78de070f9eb6 RX-Packets : 11123 RX-Bytes : 1088318 RX-Drops : 0 Malformed : 0 No-Match : 0 L2-Loop : 0 TX-Packets : 11141 TX-Bytes : 1089386 TX-Drops : 0 No-Memory : 0 Port : 271d49b0-f052-4c0c-a79f-44636229e471 RX-Packets : 11141 RX-Bytes : 1089386 RX-Drops : 0 Malformed : 0 No-Match : 0 L2-Loop : 0 TX-Packets : 11123 TX-Bytes : 1088318 TX-Drops : 0 No-Memory : 0 Port : 7bd1dd3d-97eb-5312-9d0d-b26c148a4fac RX-Packets : 285577 RX-Bytes : 11994234 RX-Drops : 0 Malformed : 0 No-Match : 0 L2-Loop : 0 TX-Packets : 0 TX-Bytes : 0 TX-Drops : 0 No-Memory : 0 . . .
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switch {local | remote} {mac-cache | arp-cache | vtep-cache} <vni>
    Display a specific logical switch's local or remote MAC, ARP, or VTEP information.
    Option Description
    <vni> vni
    Allowed pattern: ^[0-9]+$
    Example
    ESXi-1> get logical-switch local mac-cache 48008 VM MAC VTEP IP VTEP MAC 00:0c:29:67:4e:5c 192.168.90.55 00:50:56:6d:74:bf ESXi-1> get logical-switch remote arp-cache 48008 VM IP VM MAC 192.168.86.47 00:50:56:6d:35:2e ESXi-1> get logical-switch local vtep-cache 48008 VTEP IP Label Segment ID VTEP MAC 192.168.90.55 96257 192.168.0.0 00:50:56:6d:74:bf
    Mode
    Basic
    Availability
    Edge, ESXi, KVM, Public Cloud Gateway

    get logical-switch-port <uuid>
    Display information about the specified logical switch port.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get logical-switch-port 593d2540-bb7b-4abe-ad78-8727ebd5c1d2 LogSwitchPort-ID LogSwitch-ID Child-UUID Child-EntityType TransportNode-ID 593d2540-bb7b-4abe-ad78-8727ebd5c1d2 857212c6-3d87-4a4a-9700-0c9d23f74f1c null LOG_SWITCH 857212c6-3d87-4a4a-9700-0c9d23f74f1c 4f7d12c6-3d87-4a4a-9700-0c9d23f74f1c 9f4e12c6-3d87-4a4a-9700-0c9d2385ac6f
    Mode
    Basic
    Availability
    Controller

    get logical-switch-port status
    Display the status for logical switch ports on this hypervisor host.
    Example
    esx-host-1> get logical-switch-port status Logical Port UUID Status DVSwitch ID Logical Switch fa1d9fcb-94cc-4a00-b499-8413f4dcef1e up 4adaf34e-6ee4-4153-844b-485a5e30627c 9c6a1a36-b468-404c-8084-bebfb91d5a31 up 65 bf 59 08 cd 4e 42 04-bf b5 93 de 83 ee ba 56 4adaf34e-6ee4-4153-844b-485a5e30627c
    Mode
    Basic
    Availability
    ESXi

    get logical-switches
    Display all logical switches associated with the VIF on this host.
    Example
    host-1> get logical-switches Host Logical Switches Summary ============================================================ Switch UUID VNI/VLAN Port Count 4e0f3312-d8c5-42b7-95a5-def111d14671 vni:41864 1
    Mode
    Basic
    Availability
    NSX Cloud VM

    get logical-switches
    Display all logical switches on this host.
    Example
    kvm-1> get logical-switches Logical Switches Summary ============================================================ Switch UUID VNI/VLAN Port Count 16fa7892-df1b-4ffe-af87-3923efc8bdbe vni:64392 0 aacc41f2-7b32-4e0e-8679-6baff5bcbb64 vni:58248 0 da091cea-505c-4528-9b09-3f63efb8000d vni:54152 0 0a8cb2ab-d15b-4b46-a6ee-0a1cd29be34d vni:31624 1 d114f967-73aa-4dfc-8d59-a16de584b380 vni:52104 0 8b652ea8-86fe-4b03-9245-997fd2d7dfee vni:48008 0
    Mode
    Basic
    Availability
    KVM

    get logical-switches
    Display information about all logical switches.
    Example
    nsx-edge-1> get logical-switches Logical Switch UUID : ea8c4460-6d15-49c5-a82e-6812a26b4200 VNI : 5001 ENCAP : STT Replication : mtep Logical Switch UUID : 7943ca31-9c8a-402e-adeb-a83f5cf2455d VNI : 7048 ENCAP : STT Replication : mtep Logical Switch UUID : 1714bc89-a627-48b0-8699-9889db1f60fc VNI : 11145 ENCAP : STT Replication : mtep Logical Switch UUID : 973b00a2-3be8-4e01-9824-3c6b7e2bf690 VLAN : 100 device : fp-eth0 IFUID : 0 Logical Switch UUID : 718f154a-c1d4-47b6-b692-11c615f91229 VNI : 11144 ENCAP : STT Replication : mtep Logical Switch UUID : 857212c6-3d87-4a4a-9700-0c9d23f74f1c VNI : 5000 ENCAP : STT Replication : mtep routing-domain: 00000007-0000-0000-0000-000000000000 Logical Switch UUID : 1667b36f-dcee-5984-b401-fdc7c2f6564c VLAN : 250 device : fp-eth1 IFUID : 1 Logical Switch UUID : 01b59e17-d8f4-43ec-8727-7bcd3d0cc85c VNI : 5002 ENCAP : STT Replication : mtep Logical Switch UUID : 624814a5-2119-443a-ba75-9fb7452e8594 VNI : 69640 ENCAP : GENEVE Replication : mtep Enable Hub : True
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get logical-switches
    Display information about all logical switches.
    Example
    nsx-controller-1> get logical-switches VNI UUID 15240 c31126b8-be8d-49a5-a7ab-d7c13f6013eb 5000 857212c6-3d87-4a4a-9700-0c9d23f74f1c 7048 7943ca31-9c8a-402e-adeb-a83f5cf2455d 19336 041d0ce3-4a26-415c-af4b-8324fb0a54fd 11144 718f154a-c1d4-47b6-b692-11c615f91229 41864 9985fd0a-c361-4a82-94cb-de004ce82834
    Mode
    Basic
    Availability
    Controller

    get logical-switches
    Display all logical switches on this host.
    Example
    esx-1> get logical-switches Logical Switches Summary ------------------------------------------------------------ Overlay Kernel Entry ============================================================ VNI DVS name VIF num 11145 nsxvswitch 2 37768 nsxvswitch 1 25480 nsxvswitch 1 27530 nsxvswitch 2 Overlay LCP Entry ============================================================ VNI Logical Switch UUID 25480 da4bd041-d19c-4a63-896e-98f50bf8b140 27530 4649f23c-6c5e-4681-a9d9-e7038074c7d0 37768 3b9fa53b-11d1-4685-9985-26fe9a05ea18 11145 bf543c67-3ffe-44dd-a1d3-57e7cd2e0aff VLAN Backed Entry ============================================================ Logical Switch UUID VLAN ID
    Mode
    Basic
    Availability
    ESXi

    get logical-switches stats
    Display a summary of all logical switch statistics.
    Example
    nsx-controller-1> get logical-switches stats LogSwitchFibMsg.vtep.update 40 LogSwitchFibMsg.vtep.remove 40 LogSwitchFibMsg.vtep.size 40 LogSwitchFibMsg.mac.update 40 LogSwitchFibMsg.mac.remove 40 LogSwitchFibMsg.mac.size 40 LogSwitchFibMsg.ip.update 40 LogSwitchFibMsg.ip.remove 40 LogSwitchFibMsg.ip.size 40
    Mode
    Basic
    Availability
    Controller

    get maintenance-mode
    Get maintenance mode
    Example
    nsx> get maintenance-mode Maintenance Mode: enabled
    Mode
    Basic
    Availability
    ESXi, KVM

    get maintenance-mode
    Get maintenance mode status.
    Example
    nsx-edge-1> get maintenance-mode Maintenance Mode: disabled
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get managers
    Show the current list of configured managers.
    Example
    nsx-controller1> get managers - 10.1.1.101 Connected - 10.1.1.102 Connected - 10.1.1.103 Connected
    Mode
    Basic
    Availability
    Controller, Edge, ESXi, KVM, Public Cloud Gateway

    get mdproxy server <uuid>
    Display a specific metadata proxy server.
    Option Description
    <uuid> Generic UUID string argument
    Allowed pattern: ^([0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})$
    Example
    nsx-edge-1> get mdproxy server d5845582-8cb5-4f6a-9d9d-d2641cd2fe55 EDGE_CLUSTER_ID: 5db40b38-05e2-4e00-ac90-74c6ff191911 EDGE_NODE_ID: 3284f707-98f9-4e7c-b573-f7898dfa12ba ID: d5845582-8cb5-4f6a-9d9d-d2641cd2fe55 SECRET: **** SERVER_URL: https://nova-server.example.com
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get mdproxy servers
    Display all metadata proxy servers.
    Example
    nsx-edge-1> get mdproxy servers EDGE_CLUSTER_ID: 5db40b38-05e2-4e00-ac90-74c6ff191911 EDGE_NODE_ID: 3284f707-98f9-4e7c-b573-f7898dfa12ba ID: d5845582-8cb5-4f6a-9d9d-d2641cd2fe55 SECRET: **** SERVER_URL: https://nova-server.example.com MONITOR_INTERVAL: 300 MONITOR_TIMEOUT: 15 MONITOR_RETRY: 3 SERVER_STATUS: CONNECTED MONITOR_TOTAL_COUNT: 100 MONITOR_FAIL_COUNT: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get memory-stats
    Display the system memory information.
    Example
    nsx-manager-1> get memory-stats MemTotal: 16430284 kB MemFree: 10472728 kB MemAvailable: 12800580 kB Buffers: 363356 kB Cached: 1820988 kB SwapCached: 0 kB Active: 4880696 kB Inactive: 513728 kB Active(anon): 3212444 kB Inactive(anon): 368 kB Active(file): 1668252 kB Inactive(file): 513360 kB Unevictable: 2348 kB Mlocked: 2348 kB SwapTotal: 3997692 kB SwapFree: 3997692 kB Dirty: 244 kB Writeback: 0 kB AnonPages: 3212392 kB Mapped: 52056 kB Shmem: 780 kB Slab: 420328 kB SReclaimable: 399656 kB SUnreclaim: 20672 kB KernelStack: 10512 kB PageTables: 11940 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 12212832 kB Committed_AS: 10288852 kB VmallocTotal: 34359738367 kB VmallocUsed: 185388 kB VmallocChunk: 34359440748 kB HardwareCorrupted: 0 kB AnonHugePages: 2764800 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 16320 kB DirectMap2M: 16760832 kB
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get mirror-session <mirror-session-id>
    Display information about the specified mirror session.
    Option Description
    <mirror-session-id> Mirror session identifier UUID
    Example
    kvm-1> get mirror-session 5a55a0e1-ec3e-40bd-9a49-1117119efe9a Mirror Session ========================================================== UUID : 5a55a0e1-ec3e-40bd-9a49-1117119efe9a Direction : Both Snap Length : 0 Source : 81286c82-67f4-40ab-84ab-1e705241134b Destination : 10.10.10.1 EncapVlan : OrigialVlan : EncapType : GRE GreKey : 0 ERspanID : Filter : Source IPs : 10.1.1.1 : 2000:1/64 Destination IPs : 20.1.1.1 : 2000:2/64 IP Protocol : TCP Source Ports : 234 Destination Ports : 2999-4000 Action : Mirror
    Mode
    Basic
    Availability
    KVM

    get mirror-sessions
    Display all mirror sessions on this host.
    Example
    kvm-1> get mirror-sessions Mirror Session Summary ============================================================ Mirror UUID Direction Snap Length 5a55a0e1-ec3e-40bd-9a49-1117119efe9a Both 0
    Mode
    Basic
    Availability
    KVM

    get name-servers
    Get all name servers in the DNS configuration.
    Example
    nsx> get name-servers 192.168.110.10 192.168.110.11
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get namespace status <string>
    Display a specific namespace config
    Option Description
    <string> Generic string argument
    Allowed pattern: ^([A-Za-z0-9_:.-]+)$
    Example
    nsx-edge-1> get namespace status root INTERFACE: ADMIN_STATUS: True IF_ID: 1 MTU: 65536 NAME: lo VLAN_ID: 0 NAME: root ROUTE: DEVICE: eth0 NEXTHOP: 169957373 PREFIX: IPV4: 0.0.0.0 PREFIX_LENGTH: 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get namespaces status
    Display all namespace configs.
    Example
    nsx-edge-1> get namespaces status INTERFACE: ADMIN_STATUS: True IF_ID: 1 MTU: 65536 NAME: lo VLAN_ID: 0 NAME: root ROUTE: DEVICE: eth0 NEXTHOP: 169957373 PREFIX: IPV4: 0.0.0.0 PREFIX_LENGTH: 0 INTERFACE: ADMIN_STATUS: True IF_ID: 1 MTU: 65536 NAME: lo VLAN_ID: 0 NAME: plr_sr ROUTE: DEVICE: lo NEXTHOP: 0 PREFIX: IPV4: 127.0.0.0 PREFIX_LENGTH: 32
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get neighbor
    Display the neighbor table for the logical router in the VRF context.
    Example
    nsx-edge-1(vrf)> get context neighbor Logical Router UUID : d4c86bd9-cb52-4f38-b6b9-3bf521fa27f8 VRF : 6 LR-ID : 6 name : R3 type : DISTRIBUTED_ROUTER neighbor interface : c66fc321-df74-4aaa-835e-95dc815fe7ae IP : 172.16.130.13 MAC : 00:50:56:8e:3e:0b state : perm interface : f6ef3b50-64a0-4948-ab9e-9135963d4b8b IP : 169.0.0.2 MAC : 02:50:56:00:00:05 state : reach timeout : 429 interface : be290c92-74ed-437c-bbf1-dd78673b6a5a IP : 172.16.120.11 MAC : 00:50:56:8e:15:e5 state : reach timeout : 482 interface : 3c139373-f8f7-441e-aac4-146d9b5ff3a6 IP : 172.16.110.11 MAC : 00:50:56:8e:91:12 state : perm
    Mode
    VRF, Tier0_sr, Tier1_sr
    Availability
    Edge, Public Cloud Gateway

    get network-stats
    Display the system network statistics.
    Example
    nsx-manager-1> get network-stats Ip: Total packets received: 165414209 Forwarded: 0 Incoming packets discarded: 0 Incoming packets delivered: 165187515 Requests sent out: 165175926 Icmp: ICMP messages received: 157 ICMP messages failed: 5 ICMP input historgram: Destination unreachable: 152 ICMP messages sent: 151 ICMP messages failed: 0 ICMP output historgram: Destination unreachable: 151 IcmpMsg: InType3: 152 InType8: 5 OutType3: 151 Tcp: Active connections openings: 277703 Passive connection openings: 274411 Failed connection attempts: 3339 Connection resets attempts: 4921 Connections established: 160 Segments received: 164687995 Segments sent out: 164695227 Segments retransmitted: 28845 Bad segments received: 0 Resets sent: 22503 Udp: Packets received: 499183 Packets to unknown port received: 151 Packet receive errors: 1 Packets sent: 454814 RcvbufErrors: 0 SndbufErrors: 0 UdpLite: InDatagrams: 0 NoPorts: 0 InErrors: 0 OutDatagrams: 0 RcvbufErrors: 0 SndbufErrors: 0
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get node upgrade status
    Display upgrade status of the node.
    Example
    nsx-edge-1> get node upgrade status Running "run_migration_tool" (step 7 of 10) Running "start_manager" (step 8 of 10) Running "update_upgrade_status" (step 9 of 10) Running "finish_upgrade" (step 10 of 10) Playbook finished successfully
    Mode
    Basic
    Availability
    Manager, Policy Manager

    get node-uuid
    Display the UUID for the host.
    Example
    host-1> get node-uuid f776222e-c95c-11e5-8e3e-23020aa2163f
    Mode
    Basic
    Availability
    ESXi, KVM

    get node-uuid
    Show the UUID for the node.
    Example
    nsx> get node-uuid uuid: 692eef9a-026e-4e24-8494-251990b2b4e3
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get nodes
    Display the list of registered nodes.
    Example
    nsx-manager-1> get nodes 761ce797-9c70-483b-9436-41d3b8cd61f7 ctl nsxcontroller b7d381b2-c253-11e7-a6e6-02000a0ebd5a edg nsxedge-1 b08873b8-c253-11e7-9bef-02000add0b5e edg nsxedge-2 3fb2bb34-c253-11e7-925b-07f31f93af9b esx esx-1 4b371be6-c253-11e7-a3ab-7f7cf7e9f11b esx esx-2 420b6c9a-7d61-fa6d-76c7-2faceaa8288c mgr nsxmanager
    Mode
    Basic
    Availability
    Manager

    get ntp-server associations
    Display the status of the NTP system. The delay, offset and dispersion values are in seconds.
    Example
    nsx-manager-1> get ntp-server associations remote refid st t when poll reach delay offset jitter ============================================================================== 0.ubuntu.pool.n .POOL. 16 p - 64 0 0.000 0.000 0.000 1.ubuntu.pool.n .POOL. 16 p - 64 0 0.000 0.000 0.000 2.ubuntu.pool.n .POOL. 16 p - 64 0 0.000 0.000 0.000 3.ubuntu.pool.n .POOL. 16 p - 64 0 0.000 0.000 0.000 ntp.ubuntu.com .POOL. 16 p - 64 0 0.000 0.000 0.000 *ns1-time1.corp. 10.0.0.1 4 u 23 64 3 1.902 0.223 0.221 +ns2-time2.corp. 10.0.0.2 5 u 22 64 3 3.340 -1.312 0.026
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get ntp-servers
    Display all NTP servers.
    Example
    nsx-manager-1> get ntp-servers 0.ubuntu.pool.ntp.org 1.ubuntu.pool.ntp.org 2.ubuntu.pool.ntp.org 3.ubuntu.pool.ntp.org ntp.ubuntu.com
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get parent
    Display the parent of the current interface.
    Example
    nsx-edge-1(path)> get parent { "arp_refresh_timeout": 600, "number_arp_entries": 0, "type": "SERVICE_ROUTER_TIER0", "uuid": "f2a25dd6-4ceb-4bf5-8ad5-3e80d2970d60", "vrf": 6 } or nsx-edge-1(path)> get parent { "encap": "STT", "repl": "mtep", "uuid": "d5af58f5-0616-46fd-af83-242d82983c65", "vni": 39816 }
    Mode
    Path
    Availability
    Edge, Public Cloud Gateway

    get path
    Display the path. The arrow indicates which interface is selected. Other commands, such as get current, will display information about the selected interface.
    Example
    nsx-edge-1(path)> get path ->interface : de650f56-276d-46ef-959e-960752acfe19 interface : 140ca8de-61e0-4bba-b429-6a3791b0846a port : 9eff9e4e-9157-4107-a0dd-c79350dce6f7 port : 53bab4b1-f0df-451b-af80-0a9d5e580186 interface : 2a7bf881-1f89-4833-833e-47673b79901a interface : bbf5b23c-3f0a-4afe-b3b3-b19814d4dd2a port : 5b2068d0-8c28-4427-8be4-48f422f92309 port : eb3bd495-9ce3-40b4-a955-c2ddc4893cfa interface : 1fec3ffa-213d-4d2b-ae1b-e12857434846 interface : 13592f56-be3c-4d3d-88de-7d5825dd51bb port : c588fc5d-dd62-45b2-bc16-3dae466c16c7 port : 2120ef07-05e3-477f-8d96-e2be390784db interface : 3bbbd5e9-2ffe-4fb7-9edb-edc7bba67278 interface : dd10beb2-3673-43a5-b180-ecc46e830ee0 port : fdc429ef-d778-421b-bf84-e1063a7bf5ab
    Mode
    Path
    Availability
    Edge, Public Cloud Gateway

    get physical-port <physical-port-name>
    Display the specified physical port.
    Option Description
    <physical-port-name> Datapath String argument
    Example
    nsx-edge-1> get physical-port fp-eth1 Physical Port DRIVER : rte_vmxnet3_pmd DUPLEX : full ID : 1 LINK : up MAC : 00:50:56:a9:a2:e6 MTU : 1600 NAME : fp-eth1 OFFLOAD_CAPABILITIES : TX_VLAN_INSERT TX_UDP_CKSUM TX_TCP_CKSUM TX_TCP_TSO RX_VLAN_STRIP RX_UDP_CKSUM RX_TCP_CKSUM PCI : 0000:13:00:00 POLLING_STATUS : active RX_QUEUE : 1 SOCKET : -1 SPEED : 10000 TX_QUEUE : 1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get physical-port <physical-port-name> stats
    Display statistics for the specified physical port.
    Option Description
    <physical-port-name> Datapath String argument
    Example
    nsx-edge-1> get physical-port fp-eth1 stats Physical Port Stats NAME : fp-eth1 RX_BYTES : 744689 RX_DROP_NO_MATCH : 0 RX_ERRORS : 0 RX_MISSES : 0 RX_NOMBUFS : 0 RX_PACKETS : 8984 TX_BYTES : 7140 TX_DROPS : 0 TX_ERRORS : 0 TX_PACKETS : 170
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get physical-port <physical-port-name> stats verbose
    Display verbose statistics for the specified physical port.
    Option Description
    <physical-port-name> Datapath String argument
    Example
    nsx-edge-1> get physical-port fp-eth1 stats verbose Physical Port Stats NAME : fp-eth1 RX_BYTES : 749793 RX_DROP_NO_MATCH : 0 RX_ERRORS : 0 RX_MISSES : 0 RX_NOMBUFS : 0 RX_PACKETS : 9037 TX_BYTES : 7140 TX_DROPS : 0 TX_ERRORS : 0 TX_PACKETS : 170 QUEUES : id rx_bytes rx_errors rx_packets tx_bytes tx_drops tx_packets 0 749793 0 9037 7140 0 170 1 0 0 0 0 0 0 2 0 0 0 0 0 0 3 0 0 0 0 0 0 4 0 0 0 0 0 0 5 0 0 0 0 0 0 6 0 0 0 0 0 0 7 0 0 0 0 0 0 8 0 0 0 0 0 0 9 0 0 0 0 0 0 10 0 0 0 0 0 0 11 0 0 0 0 0 0 12 0 0 0 0 0 0 13 0 0 0 0 0 0 14 0 0 0 0 0 0 15 0 0 0 0 0 0
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get physical-ports
    Display all physical ports.
    Example
    nsx-edge-1> get physical-ports Physical Port DRIVER : rte_vmxnet3_pmd DUPLEX : full ID : 0 LINK : up MAC : 00:50:56:a9:51:09 MTU : 1500 NAME : fp-eth0 OFFLOAD_CAPABILITIES : TX_VLAN_INSERT TX_UDP_CKSUM TX_TCP_CKSUM TX_TCP_TSO RX_VLAN_STRIP RX_UDP_CKSUM RX_TCP_CKSUM PCI : 0000:0b:00:00 POLLING_STATUS : inactive RX_QUEUE : 1 SOCKET : -1 SPEED : 10000 TX_QUEUE : 1 Physical Port DRIVER : rte_vmxnet3_pmd DUPLEX : full ID : 1 LINK : up MAC : 00:50:56:a9:a2:e6 MTU : 1600 NAME : fp-eth1 OFFLOAD_CAPABILITIES : TX_VLAN_INSERT TX_UDP_CKSUM TX_TCP_CKSUM TX_TCP_TSO RX_VLAN_STRIP RX_UDP_CKSUM RX_TCP_CKSUM PCI : 0000:13:00:00 POLLING_STATUS : active RX_QUEUE : 1 SOCKET : -1 SPEED : 10000 TX_QUEUE : 1 Physical Port DRIVER : rte_vmxnet3_pmd DUPLEX : full ID : 2 LINK : up MAC : 00:50:56:a9:5b:33 MTU : 1500 NAME : fp-eth2 OFFLOAD_CAPABILITIES : TX_VLAN_INSERT TX_UDP_CKSUM TX_TCP_CKSUM TX_TCP_TSO RX_VLAN_STRIP RX_UDP_CKSUM RX_TCP_CKSUM PCI : 0000:1b:00:00 POLLING_STATUS : inactive RX_QUEUE : 1 SOCKET : -1 SPEED : 10000 TX_QUEUE : 1
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get ports
    Display port information on the current host.
    Example
    esx-1> get ports PortNum Switch Client DVSPort MAC Uplink ================================================================================================================================== 50331649 DvsPortset-0 Management 00:00:00:00:00:00 n/a 50331650 DvsPortset-0 vmnic1 uplink1 00:00:00:00:00:00 50331651 DvsPortset-0 Shadow of vmnic1 00:50:56:58:d0:45 n/a 50331652 DvsPortset-0 vmk10 10 00:50:56:67:49:73 vmnic1 50331653 DvsPortset-0 vmk50 624ce7e0-b7ea-41de-ada6-a9b1a1 00:50:56:67:e8:1c void f9ee67 50331654 DvsPortset-0 vdr-vdrPort vdrPort 02:50:56:56:44:52 vmnic1 50331655 DvsPortset-0 1-vm_ubuntu_1404_srv_64-local- 51f92d21-95dd-4b47-8569-db3ce6 00:0c:29:d9:7f:f5 vmnic1 935-d6f49164-29ef-4e24-aa24-20 61f2a5 2dac5e635c.eth1
    Mode
    Basic
    Availability
    ESXi

    get processes
    Display a snapshot of the system processes.
    Example
    nsx> get processes top - 01:12:28 up 3 days, 1:51, 1 user, load average: 0.06, 0.05, 0.07 Tasks: 133 total, 1 running, 132 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.2 us, 0.9 sy, 0.0 ni, 94.7 id, 0.2 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 16430712 total, 2604180 used, 13826532 free, 324432 buffers KiB Swap: 3997692 total, 0 used, 3997692 free. 460404 cached Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 20 0 33216 2564 1460 S 0.0 0.0 2:51.13 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:02.21 ksoftirqd/0 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H 7 root 20 0 0 0 0 S 0.0 0.0 1:23.74 rcu_preempt 8 root 20 0 0 0 0 S 0.0 0.0 0:39.39 rcuop/0 . . .
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get processes monitor
    Display information about processes that are running. The display is updated every few seconds.
    Example
    nsx-manager-1> get processes monitor top - 00:24:51 up 15 days, 6 min, 1 user, load average: 0.18, 0.16, 0.15 Tasks: 142 total, 2 running, 140 sleeping, 0 stopped, 0 zombie %Cpu(s): 6.2 us, 1.3 sy, 0.0 ni, 92.3 id, 0.2 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 16430284 total, 5863860 used, 10566424 free, 363284 buffers KiB Swap: 3997692 total, 0 used, 3997692 free. 1732000 cached Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1530 uproton 20 0 8867728 1.862g 23868 S 18.6 11.9 3041:54 java 2245 rabbitmq 20 0 1200504 110528 4568 S 4.6 0.7 484:17.48 beam.smp 1009 elastic+ 20 0 4611496 403996 15712 S 1.0 2.5 178:33.40 java . . .
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get processes monitor
    Display information about processes that are running. The display is updated every few seconds.
    Example
    nsx-manager-1> get processes monitor top - 00:24:51 up 15 days, 6 min, 1 user, load average: 0.18, 0.16, 0.15 Tasks: 142 total, 2 running, 140 sleeping, 0 stopped, 0 zombie %Cpu(s): 6.2 us, 1.3 sy, 0.0 ni, 92.3 id, 0.2 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 16430284 total, 5863860 used, 10566424 free, 363284 buffers KiB Swap: 3997692 total, 0 used, 3997692 free. 1732000 cached Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1530 uproton 20 0 8867728 1.862g 23868 S 18.6 11.9 3041:54 java 2245 rabbitmq 20 0 1200504 110528 4568 S 4.6 0.7 484:17.48 beam.smp 1009 elastic+ 20 0 4611496 403996 15712 S 1.0 2.5 178:33.40 java . . .
    Mode
    Basic
    Availability
    Controller, Key Manager, Manager, Policy Manager

    get publication <uuid>
    Display the publication for the specified object.
    Option Description
    <uuid> Object identifier
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get publication 00000000-0000-0000-0000-000000000001 <<<Interpreted by Dfw>>> direction = RD_BOTH span = 8c466583-4186-4caa-abf5-8a3ff9523722,8642a216-ec51-45af-a4b2-57685d094f7e log = false flow = false priority = 2305843009213693951 action = RA_PASS type = RT_LAYER2 id = 1 publication = 3
    Mode
    Basic
    Availability
    Controller

    get publication dump <filename>
    Dump publications to a file.
    Option Description
    <filename> Filename argument
    Allowed pattern: ^[^/ *;&|]+$
    Example
    nsx-controller-1> get publication dump pubs000 /var/vmware/nsx/file-store/pubs000
    Mode
    Basic
    Availability
    Controller

    get publications with transport-node <uuid>
    Display publications for the specified transport node.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get publications with transport-node 8c466583-4186-4caa-abf5-8a3ff9523722 id: 8266f308-e9d0-47bb-bd7f-d5b10d7661f5 id: 329e4c03-01cf-434b-829b-9718ae1f4c83 id: 00000000-0000-0000-0000-000000000001 id: 00000000-0000-0000-0000-000000000002
    Mode
    Basic
    Availability
    Controller

    get realization-status <uuid>
    Get the realization status for the specified transport node.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get realization status 7c72c4ae-8fe8-4449-a4e2-c5e53ab0bb4f {u'VERTICAL_ID_DFW': 1191}
    Mode
    Basic
    Availability
    Controller

    get receivers
    Display all connected receivers.
    Example
    nsx-controller-1> get receivers ['e97edc33-0b56-11e7-8af3-85d3287ccc85', '6a93350e-0b57-11e7-a82e-02002a4b8864', 'f763ddf5-0b56-11e7-84aa-81f3962a9a84']
    Mode
    Basic
    Availability
    Controller

    get route [<prefix>]
    Display detailed information of an IPv6 route in RIB. Specify a prefix or IPv6 address to display only the route used for that network.
    Option Description
    <prefix> Network Address argument
    Example
    nsx-edge-1(tier0_sr)> get route 2005::/64 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 1 t0c> * 2005::/64 is directly connected, uplink-273, 00:52:46
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get route [<prefix>]
    Display detailed information of an IPv4 route in RIB. Specify a prefix or IPv4 address to display only the route used for that network.
    Option Description
    <prefix> Network Address argument
    Example
    nsx-edge-1(tier0_sr)> get route 22.3.3.0/24 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 1 t0s> * 22.3.3.0/24 [103/0] via 50.50.50.10, uplink-273, 00:49:52
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get route bgp [<prefix>]
    Display IPv4 BGP routes for a specified prefix in RIB.
    Option Description
    <prefix> Network Address argument
    Example
    nsx-edge-1(tier0_sr)> get route bgp 2.1.0.0/16 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 2 b > * 2.1.4.0/24 [20/0] via 40.40.40.10, uplink-276, 21:12:29 b > * 2.1.5.0/24 [20/0] via 90.90.90.10, uplink-282, 21:12:10
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get route connected [<prefix>]
    Display IPv4 Connected routes for a specified prefix in RIB.
    Option Description
    <prefix> Network Address argument
    Example
    nsx-edge-1(tier0_sr)> get route connected 1.0.0.0/8 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 2 t0c> * 1.1.3.0/24 is directly connected, downlink-294, 21:17:14 t0c> * 1.2.3.0/24 is directly connected, downlink-297, 21:17:04
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get route prefix <prefix>
    Display the specified IPv4 route.
    Option Description
    <prefix> CIDR notation argument
    Example
    nsx> get route prefix 192.168.110.0/24 192.168.110.0/24 interface eth0
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get route static [<prefix>]
    Display IPv4 Static routes for a specified prefix in RIB.
    Option Description
    <prefix> Network Address argument
    Example
    nsx-edge-1(tier0_sr)> get route static 1.1.0.0/16 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, B - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 2 t1c> * 1.1.2.0/24 [3/0] via 100.64.1.1, downlink-298, 21:10:43 t1c> * 1.1.1.0/25 [3/0] via 100.64.1.1, downlink-298, 21:10:43
    Mode
    Tier0_sr
    Availability
    Edge, Public Cloud Gateway

    get routes
    Display all configured IPv4 routes.
    Example
    nsx> get routes 0.0.0.0/0 gateway 192.168.110.1 interface eth0 192.168.110.0/24 interface eth0
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get routing-domain <uuid>
    Display information about the specified routing domain.
    Option Description
    <uuid> Datapath UUID argument
    Example
    nsx-edge> get routing-domain b16a3ce5-e61d-43b4-b45b-66d29c8d3cf0 Routing Domain UUID : b16a3ce5-e61d-43b4-b45b-66d29c8d3cf0 Replication Tunnels Tunnel : 1e44a970-86e0-5a76-9e4f-ecc676b45148 IFUID : 264 Local : 200.200.200.3 Remote : 200.200.200.4 ENCAP : GENEVE MTEP : False Tunnel : 7305d7f1-3e84-5df6-9fdb-e29e76148542 IFUID : 273 Local : 200.200.200.3 Remote : 200.200.200.2 ENCAP : GENEVE MTEP : False
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get routing-domain <uuid>
    Display information about the specified routing domain.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    esx-1> get routing-domain e168bb77-80f2-4cd5-8731-86025e095a78 Realized State: Routing Domain UUID : e168bb77-80f2-4cd5-8731-86025e095a78 Replication Tunnels ENCAP : GENEVE Local : 192.168.111.124 Local-subnet: /192.168.111.0 Remote : 192.168.111.99 Remote-subnet: /192.168.111.0 ENCAP : GENEVE Local : 192.168.111.124 Local-subnet: /192.168.111.0 Remote : 192.168.111.144 Remote-subnet: /192.168.111.0
    Mode
    Basic
    Availability
    ESXi

    get routing-domain <uuid>
    Display information about the specified routing domain.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    kvm-1> get routing-domain e168bb77-80f2-4cd5-8731-86025e095a78 Desired State: Routing Domain UUID : e168bb77-80f2-4cd5-8731-86025e095a78 Realized State: Routing Domain UUID : e168bb77-80f2-4cd5-8731-86025e095a78 Replication Tunnels Tunnel : "geneve3232264035" ENCAP : GENEVE Local : 192.168.111.124 Local-subnet: /192.168.111.0 Remote : 192.168.111.99 Remote-subnet: /192.168.111.0 Tunnel : "geneve3232264080" ENCAP : GENEVE Local : 192.168.111.124 Local-subnet: /192.168.111.0 Remote : 192.168.111.144 Remote-subnet: /192.168.111.0
    Mode
    Basic
    Availability
    KVM

    get routing-domain <uuid> vtep
    Display information about all routing domains.
    Option Description
    <uuid> UUID argument
    Allowed pattern: ^[0-9a-fA-F]{8}-([0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}$
    Example
    nsx-controller-1> get routing-domain 857212c6-3d87-4a4a-9700-0c9d23f74f1c vtep Routing-Domain-ID IP LABEL Segment MAC TransportNodeId 857212c6-3d87-4a4a-9700-0c9d23f74f1c 192.168.250.163 0x18801 192.168.250.0 04:00:c0:a8:fa:a3 857212c6-3d87-4a4a-9700-0c9d23f74f1c 99999999-3d87-4a4a-9700-0c9d23f74f1c 192.168.250.162 0xC801 192.168.250.0 04:00:c0:a8:fa:a2 857212c6-3d87-4a4a-9700-0c9d23f74f1d
    Mode
    Basic
    Availability
    Controller

    get routing-domains
    Display information about all routing domains.
    Example
    esx-1> get routing-domains Desired State: Routing Domain UUID : e168bb77-80f2-4cd5-8731-86025e095a78 Realized State: Routing Domain UUID : e168bb77-80f2-4cd5-8731-86025e095a78 Replication Tunnels ENCAP : GENEVE Local : 192.168.111.124 Local-subnet: /192.168.111.0 Remote : 192.168.111.99 Remote-subnet: /192.168.111.0 ENCAP : GENEVE Local : 192.168.111.124 Local-subnet: /192.168.111.0 Remote : 192.168.111.144 Remote-subnet: /192.168.111.0
    Mode
    Basic
    Availability
    ESXi

    get routing-domains
    Display information about all routing domains.
    Example
    kvm-1> get routing-domains Desired State: Routing Domain UUID : e168bb77-80f2-4cd5-8731-86025e095a78 Realized State: Routing Domain UUID : e168bb77-80f2-4cd5-8731-86025e095a78 Replication Tunnels Tunnel : "geneve3232264035" ENCAP : GENEVE Local : 192.168.111.124 Local-subnet: /192.168.111.0 Remote : 192.168.111.99 Remote-subnet: /192.168.111.0 Tunnel : "geneve3232264080" ENCAP : GENEVE Local : 192.168.111.124 Local-subnet: /192.168.111.0 Remote : 192.168.111.144 Remote-subnet: /192.168.111.0
    Mode
    Basic
    Availability
    KVM

    get routing-domains
    Display information about all routing domains.
    Example
    nsx-edge> get routing-domain Routing Domain UUID : b16a3ce5-e61d-43b4-b45b-66d29c8d3cf0 Replication Tunnels Tunnel : 1e44a970-86e0-5a76-9e4f-ecc676b45148 IFUID : 264 Local : 200.200.200.3 Remote : 200.200.200.4 ENCAP : GENEVE MTEP : False Tunnel : 7305d7f1-3e84-5df6-9fdb-e29e76148542 IFUID : 273 Local : 200.200.200.3 Remote : 200.200.200.2 ENCAP : GENEVE MTEP : False Routing Domain UUID : bca731e7-171e-4ca0-82c2-2df4974a44a7 Replication Tunnels Tunnel : 1e44a970-86e0-5a76-9e4f-ecc676b45148 IFUID : 264 Local : 200.200.200.3 Remote : 200.200.200.4 ENCAP : GENEVE MTEP : False Tunnel : 7305d7f1-3e84-5df6-9fdb-e29e76148542 IFUID : 273 Local : 200.200.200.3 Remote : 200.200.200.2 ENCAP : GENEVE MTEP : False
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get routing-domains
    Display information about all routing domains.
    Example
    nsx-controller-1> get routing-domains Desired State: Routing-Domain c31126b8-be8d-49a5-a7ab-d7c13f6013eb 857212c6-3d87-4a4a-9700-0c9d23f74f1c
    Mode
    Basic
    Availability
    Controller

    get search-domains
    Get all domain names in the DNS search list.
    Example
    nsx> get search-domains eng.example.com corp.example.com example.com
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get service <service-name>
    Display information about the specified service.
    Option Description
    <service-name> Node service argument
    Example
    nsx> get service snmp Service name: snmp Service state: running Start on boot: True
    Mode
    Basic
    Availability
    Controller, Edge, Key Manager, Manager, Policy Manager, Public Cloud Gateway

    get service controller logging-config
    Display global logging configuration.
    Example
    nsx-controller-1> get service controller logging-config Name: LogLevel: debug Name: BarrierSplitter LogLevel: debug Name: BgpConfigSplitter LogLevel: debug Name: BgpNeighborSplitter LogLevel: debug Name: BridgeClusterSplitter LogLevel: debug Name: CommunityListSplitter LogLevel: debug Name: ContainerSplitter LogLevel: debug Name: DependencyGraphSpanUpdaterImpl:DepGraph LogLevel: debug Name: DependencyGraphSpanUpdaterImpl:SrcGraph LogLevel: debug Name: DhcpIpPoolSplitter LogLevel: debug Name: DhcpRelaySplitter LogLevel: debug Name: DhcpStaticBindingSplitter LogLevel: debug Name: DigraphSpanComputerImpl LogLevel: debug Name: DneRuleSectionSplitter LogLevel: debug Name: DneRuleSplitter LogLevel: debug Name: FilterSpanSplitter LogLevel: debug Name: GlobalRoutingSplitter LogLevel: debug . . .
    Mode
    Basic
    Availability
    Controller

    get service controller logging-config logging-level <level>
    Display the logging configuration for components that have the specified log level.
    Option Description
    <level> The controller service logging level
    Allowed values: off, fatal, error, warn, info, debug, trace
    Example
    nsx-controller-1> get service controller logging-config logging-level error Name: BgpConfigSplitter LogLevel: error Name: DhcpIpPoolSplitter LogLevel: error
    Mode
    Basic
    Availability
    Controller

    get service controller logging-config name <string>
    Display the logging configuration for the specified component.
    Option Description
    <string> String argument
    Allowed pattern: ^.*$
    Example
    nsx-controller-1> get service controller logging-config name BgpConfigSplitter Name: BgpConfigSplitter LogLevel: debug
    Mode
    Basic
    Availability
    Controller

    get service controller logging-config pattern <string>
    Display the logging configuration for components that match the specified pattern. The pattern can be a regular expression.
    Option Description
    <string> String argument
    Allowed pattern: ^.*$
    Example
    nsx-controller-1> get service controller logging-config pattern Dhcp Name: DhcpIpPoolSplitter LogLevel: debug Name: DhcpRelaySplitter LogLevel: debug Name: DhcpStaticBindingSplitter LogLevel: debug Name: LogicalDhcpServerSplitter LogLevel: debug Name: com.vmware.nsx.canary.span.DhcpIpPoolSpanner LogLevel: debug Name: com.vmware.nsx.canary.span.DhcpStaticBindingSpanner LogLevel: debug Name: com.vmware.nsx.canary.span.LogicalDhcpServerSpanner LogLevel: debug
    Mode
    Basic
    Availability
    Controller

    get service controller logging-level
    Display the log level for the controller service.
    Example
    nsx-controller-1> get service controller logging-level Logging level: debug
    Mode
    Basic
    Availability
    Controller

    get service dataplane logging-level
    Display the log level of the dataplane service.
    Example
    nsx-edge-1> get service dataplane logging-level Log level: INFO
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get service dhcp logging-level
    Display the log level of the dhcp service.
    Example
    nsx-edge-1> get service dhcp logging-level Log level: INFO
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get service ike debug-tunnel
    Display IKE per tunnel debugging configuration
    Example
    nsx-edge-1> get service ike debug-tunnel Local IP : 10.0.0.1 Remote IP : 10.1.0.1 Debug Level : midok ------------------------------ Local IP : 10.0.0.1 Remote IP : 10.1.0.2 Debug Level : lowok ------------------------------ Local IP : 10.0.0.3 Remote IP : 10.1.0.4 Debug Level : fail ------------------------------ Local IP : 10.0.0.1 Remote IP : 10.1.2.1 Debug Level : lowstart ------------------------------ nsx-edge-1>
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get service ike logging-level
    Display the log level of the IKE service.
    Example
    nsx-edge-1> get service ike logging-level Log level: INFO
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get service local-controller logging-level
    Display the log level of the local-controller service.
    Example
    nsx-edge-1> get service local-controller logging-level Log level: INFO
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get service local-controller state
    Display the state of the local controller service.
    Example
    nsx-edge-1> get service local-controller state Uptime : 3556847.000 seconds (since 2016-09-12 18:07:03.20) Full Sync State : Completed at {'num': 1, 'time': '2016-09-20 10:19:24.22'} Controller Session : Up IPC Channel State Datapath Config : Up since 2016-09-12 18:07:06.37 Datapath State : Up since 2016-09-12 18:07:05.49 Routing Service : Up since 2016-09-12 18:07:03.37 BFD Config : None BFD State : None
    Mode
    Basic
    Availability
    Edge, Public Cloud Gateway

    get service nsx-cfgagent cache-table [{config | l2 | l3} {local | remote}]
    Display the whole cache table in cfgagent. Optionally specify arguments to display only the local configuration, remote configuration, local L2, or remote L2 information, and remote L3 information.
    Example
    ESXi-1> get service nsx-cfgagent cache-table config local ObjectID ObjectType FullSyncVersion PropertyType PropertyValue 007ec6fd-e307-428a-8ccf-d1d0de2a26e5 VIF_STATE 1 INVALID_PROPERTY 007ec6fd-e307-428a-8ccf-d1d0de2a26e5 VIF_STATE 1 VIF_MAC id: "40d4ee0a-087e-4b38-a959-afeb2d67f23b" vif_mac { mac: 345046739262 } ESXi-1> get service nsx-cfgagent cache-table l2 remote ObjectID ObjectType FullSyncVersion PropertyType PropertyValueKey PropertyValue ad209a8e-2f4c-40e1-ba63-5459f3922d9a LOG_SWITCH_FIB 1 L2_VTEP 2050 vtep_ip { ipv4: 2886785032 } vtep_label { label: 2050 } segment_id { ipv4: 2886778880 } vtep_mac { mac: 345046978033 } ad209a8e-2f4c-40e1-ba63-5459f3922d9a LOG_SWITCH_FIB 1 L2_VM_MAC 345047285093 mac { mac: 345047285093 } vtep_ip { ipv4: 2886785032 } vtep_mac { mac: 345046978033 } ESXi-1> get service nsx-cfgagent cache-table ......
    Mode
    Basic
    Availability
    ESXi

    get service router config
    Display the entire routing configuration.
    Example
    nsx-edge-1> get service router config ROUTING CONFIGURATION: ====================== { "redist": { "bgp_enabled": true }, "redistri_rules": [ { "rule": [ { "to_proto": 1, "seq_id": 0, "flags": 103, "name": { "string": "rule3" }, "description": { "string": "Rule3" } } ] } ], "static_route": [ { "prefix": { "ipv4": "1.1.1.0", "prefix_length": 25 }, "nexthops": [ { "route_type": 3, "ip": { "ipv4": "169.254.0.1" }, "if_index": 6, "admin_distance": 3 } ] }, { "prefix": { "ipv4": "11.11.1.0", "prefix_length": 24 }, "nexthops": [ { "route_type": 4, "if_index": 1, "admin_distance": 2 } ] }, { "prefix": { "ipv4": "111.111.0.0", "prefix_length": 16 }, "nexthops": [ { "route_type": 3, "ip": { "ipv4": "169.254.0.1" }, "if_index": 6, "admin_distance": 3 } ] }, { "prefix": { "ipv4": "11.11.2.0", "prefix_length": 24 }, "nexthops": [ { "route_type": 5, "ip": { "ipv4": "169.254.0.1" }, "if_index": 6, "admin_distance": 3 } ] }, { "prefix": { "ipv4": "100.64.1.0", "prefix_length": 31 }, "nexthops": [ { "route_type": 7, "ip": { "ipv4": "169.254.0.1" }, "if_index": 6, "admin_distance": 0 } ] }, { "prefix": { "ipv4": "1.1.3.0", "prefix_length": 24 }, "nexthops": [ { "route_type": 6, "ip": { "ipv4": "169.254.0.1" }, "if_index": 6, "admin_distance": 0 } ] }, { "prefix": { "ipv4": "1.1.2.0", "prefix_length": 24 }, "nexthops": [ { "route_type": 3, "ip": { "ipv4": "169.254.0.1" }, "if_index": 6, "admin_distance": 3 } ] } ], "bgp_config": { "enabled": true, "local_as": 422, "graceful_restart": false, "neighbor": [ { "enable": true, "remote_as": 420, "description": { "string": "BGP_config created through automation" }, "hold_down_timer": 4, "address_family": [ { "route_map_out": { "route_map_seq": [ { "action": 1, "route_map_set": {}, "id": 1, "match": { "prefix_list": [ { "prefix": [ { "action": 1, "index": 109, "network": { "ipv4": "1.1.1.0", "prefix_length": 25 }, "seq_id": 1 } ], "name": "1.1.1.0/25" } ] } }, { "action": 1, "route_map_set": { "metric": 1000 }, "id": 2, "match": { "prefix_list": [ { "prefix": [ { "index": 106, "network": { "ipv4": "1.1.0.0", "prefix_length": 16 }, "seq_id": 1, "less_or_equal_bits": 2