-A --authentication

-c <level>
-m <auth_method> -b
-v <ma_username>
-x <ma_password>
[-i <stor_ip_addr|stor_hostname> [:<portnum>] [-n <iscsi_name>]]
<adapter_name>
 
--level <level>
--method <auth_method> --mutual
--mchap_username <ma_username>
--mchap_password <ma_password>
[--ip <stor_ip_addr|stor_hostname> [:<portnum>]
[--name <iscsi_name>]] <adapter_name>

Enables mutual authentication. You must enable authentication before you can enable mutual authentication.

-A --authentication

-c <level>
-m <auth_method>
-u <auth_u_name>
-w <a_password>
[-i <stor_ip_addr|stor_hostname> [:<portnum>] [-n <iscsi_name>]] <adapter_name>
 
--level <level>
--method <auth_method>
--chap_password <auth_u_name>
--chap_username <chap_password>
[--ip <stor_ip_addr|stor_hostname> [:<portnum>]
[--name <iscsi_name>]] <adapter_name>

Enables authentication using the specified options.

-A --authentication

-l <adapter_name>
--list <adapter_name>

Lists supported authentication methods.

-D --discovery

-a -i <stor_ip_addr|stor_hostname[:<portnum>] <adapter_name>
--add --ip <stor_ip_addr|stor_hostname> [:<portnum>] <adapter_name>

Adds a dynamic discovery address.

-D --discovery

-l <adapter_name>
--list <adapter_name>

Lists dynamic discovery addresses.

-D --discovery

-r -i <stor_ip_addr|stor_hostname>[:<portnum>] <adapter_name>
--remove --ip <stor_ip_addr|stor_hostname> [:<portnum>] <adapter_name>

Removes a dynamic discovery address.

-H

-l [<adapter_name>]
--list [<adapter_name>]

Lists all iSCSI adapters or a specified adapter.

-L --lun

-l <adapter_name>
--list <adapter_name>

Lists LUN information.

-L --lun

-l -t <target_ID> <adapter_name>
--list --target_id <target_id> <adapter_name>

Lists LUN information for a specific target.

-N --network (Independent hardware iSCSI only)

-l <adapter_name>
--list <adapter_name>

Lists network properties.

-N --network (Independent hardware iSCSI only)

-i <ip_addr> <adapter_name>
--ip <ip_addr> <vmhba>

Sets the HBA IPv4 address to ip_addr.

-N --network (Independent hardware iSCSI only)

-s <subnet_mask> <adapter_name>
--subnetmask <subnet_mask> <adapter_name>

Sets the HBA network mask to subnet_mask.

-N --network (Independent hardware iSCSI only)

-g <default_gateway> <adapter_name>
--gateway <default_gateway> <adapter_name>

Sets the HBA gateway to default_gateway.

-N --network (Independent hardware iSCSI only)

	
-i <ip_addr> -s <subnet mask>
   -g <default_gateway> <adapter_name>
--ip <ip_addr> --subnetmask <subnet_mask>
   --gateway <default_gateway> <adapter_name>

Sets the IP address, subnet mask, and default gateway in one command.

-p --pnp (Independent hardware iSCSI only)

-l <adapter_name>
--list <adapter_name>

Lists physical network portal options.

-p --pnp (Independent hardware iSCSI only)

-M <mtu_size> <adapter_name>
--mtu <mtu-size> <adapter_name>

Sets physical network portal options.

-I --iscsiname

-a <alias_name> <adapter_name>
--alias <alias_name> <adapter_name>

Sets the iSCSI initiator alias.

-I --iscsiname

-n <iscsi_name> <adapter_name>
--name <iscsi_name> <adapter_name>

Sets the iSCSI initiator name.

-I --iscsiname

-l <adapter_name>
--list <adapter_name>

Lists iSCSI initiator options.

-M --mtu

-p -M <mtu_size> <adapter_name>
--pnp - -mtu <mtu-size> <adapter_name>

Sets MTU size. Used with the --pnp option.

-S --static

-l <adapter_name>
--list <adapter_name>

Lists static discovery addresses.

-S --static

-r -i <stor_ip_addr|stor_hostname> [:<portnum>] -n <target_name> <adapter_name>
--remove - -ip <stor_ip_addr|stor_hostname> [:<portnum>] -name <target_name> <adapter_name>

Removes a static discovery address.

-S --static

-a -i <stor_ip_addr|stor_hostname> [:<portnum>]
   -n <target_name> <adapter_name>
--add --ip <stor_ip_addr|stor_hostname> [:<portnum>]
   -name <target_name> <adapter_name>

Adds a static discovery address.

-P --phba

-l <adapter_name>
--list <adapter_name>

Lists external, vendor-specific properties of an iSCSI adapter.

-T --target

-l <adapter_name>
--list <adapter_name>

Lists target information.

-W --parameter

-l [-i <stor_ip_addr|stor_hostname> [:<portnum>]
   [-n <iscsi_name]] <adapter_name>
 
--list [--ip <stor_ip_addr|stor_hostname> [:<portnum>]
   [--name <iscsi_name]] <adapter_name>

Lists iSCSI parameter information.

-W --parameter

-l -k [-i <stor_ip_addr|stor_hostname> [:<portnum>] [-n <iscsi_name]] <adapter_name>
 
--list --detail
[--ip <stor_ip_addr|stor_hostname> [:<portnum>] [--name <iscsi_name]] <adapter_name>

Lists iSCSI parameter details.

-W --parameter

-W -j <name>=<value>
-i <stor_ip_addr|stor_hostname> [:port_num>] [-n <iscsi_name>]] <adapter_name>
 
--parameter - -set <name>=<value>
--ip <stor_ip_addr|stor_hostname> [:port_num>]
   [--name <iscsi_name>]] <adapter_name>

Sets iSCSI parameters.

-W --parameter

-W - o <param_name>
-i <stor_ip_addr|stor_hostname> [:port_num>] [-n <iscsi_name>]] <adapter_name>
 
-parameter --reset <param_name>
-ip <stor_ip_addr|stor_hostname> [:port_num>] [-name <iscsi_name>]] <adapter_name>

Returns parameters in discovery target or send target to default inheritance behavior.

-z --reset_auth

-a -z
-m <auth_method> -b
[-i <stor_ip_addr|stor_hostname> [:<portnum>] [-n <iscsi_name>]]
<adapter_name>
 
--authentication --reset_auth
--method <auth_method>
[--ip <stor_ip_addr|stor_hostname> [:<portnum>]
[--name <iscsi_name>]] <adapter_name>

Resets target level authentication properties to be inherited from adapter level. Used with the --authentication option.