|
Name
|
Type
|
Description
|
| bandwidthBps | xsd:long |
If the host acts as the sender, it's the value for the maximum achievable
bandwidth and if the host acts as the receiver, it's the value for the
actual network bandwidth in byte per second in the test
|
| client | xsd:boolean |
True indicates the host will act as the sender to send the network packets
to other host(s) in the network performance test
|
| hostname | xsd:string |
The host name
|
| jitterMs | xsd:float |
The network packet jitter in millisecond in the network performance test.
It shows the average packet latency between sender and receiver. This value
will only be set for the host acting as receiver
|
| lossPct | xsd:long |
The percentage for the lost datagrams in the network performance test. This
value will only be set for the host acting as receiver
|
| lostDatagrams | xsd:long |
The number of lost datagrams in the network performance test. This value
will only be set for the host acting as receiver
|
| sentDatagrams | xsd:long |
The total number of sending datagrams in the network performance test. This
value will only be set for the host acting as receiver
|
| status | xsd:string |
The host network load test status. For multicast, the status will be in red if the speed
is less than 20 MB/s, the status will be yellow if the speed is between 20MB/s and 50MB/s
and it's green if the speed is larger than 50MB/s; For unicast, the status will be red if
the speed is 0 Mb/s, and yellow if the speed is less than 850 Mb/s, the status will be
green if the speed is larger than or equal to 850 Mb/s.
|
| totalBytes | xsd:long |
The total received or sent packet bytes in the network performance test
|
|
Properties inherited from DynamicData |
| None |