Name
|
Type
|
Description
|
addressSettable | xsd:boolean |
True if the host bus adapter supports setting its IPv4 address.
|
alternateDnsServerAddressSettable | xsd:boolean |
True if the host bus adapter supports setting its secondary DNS.
|
arpRedirectSettable | xsd:boolean |
True if the host bus adapter supports setting its ARP Redirect value
Since vSphere API 4.0
|
defaultGatewaySettable | xsd:boolean |
True if the host bus adapter supports setting its IPv4 gateway.
|
hostNameAsTargetAddress | xsd:boolean |
True if the discovery and static targets can be configured with
a host name as opposed to an IP address.
Since vSphere API 4.0
|
ipConfigurationMethodSettable | xsd:boolean |
True if the host bus adapter supports DHCPv4.
|
ipv4EnableSettable | xsd:boolean |
True if IPv4 addresssing can be enabled or disabled on the host bus adapter.
Since vSphere API 6.0
|
ipv6DefaultGatewaySettable | xsd:boolean |
True if the Host bus adapter supports setting its IPv6 default gateway.
Since vSphere API 6.0
|
ipv6DhcpConfigurationSettable | xsd:boolean |
True if the Host bus adapter supports DHCPv6 configuration.
Since vSphere API 6.0
|
ipv6EnableSettable | xsd:boolean |
True if IPv6 addresssing can be enabled or disabled on the host bus adapter.
Since vSphere API 6.0
|
ipv6LinkLocalAutoConfigurationSettable | xsd:boolean |
True if the Host bus adapter supports setting configuration of its IPv6 link local address
User can specify link local static address if link local auto configuration is set to false.
link local address usually starts with fe80: and has prefix 64.
Since vSphere API 6.0
|
ipv6MaxStaticAddressesSupported | xsd:int |
The maximum number of supported IPv6 static addresses on the
host bus adapter that user can set.
Since vSphere API 6.0
|
ipv6PrefixLength | xsd:int |
Provides the value that user should be using if host bus adapter
does not support changing of prefix length.
Since vSphere API 6.0
|
ipv6PrefixLengthSettable | xsd:boolean |
True if the Host bus adapter supports setting IPv6 Prefix Length.
Since vSphere API 6.0
|
ipv6RouterAdvertisementConfigurationSettable | xsd:boolean |
True if the Host bus adapter supports router advertisement configuration method.
Note: Currently Qlogic adapter does not support plumbing of any user specified
static address if router advertisement method is enabled.
Since vSphere API 6.0
|
ipv6Supported | xsd:boolean |
True if the host bus adapter supports the use of IPv6 addresses
Since vSphere API 4.0
|
mtuSettable | xsd:boolean |
True if the host bus adapter supports setting its MTU, (for Jumbo
Frames, etc)
Since vSphere API 4.0
|
nameAliasSettable | xsd:boolean |
True if the host bus adapter supports setting its name and alias
Since vSphere API 4.1
|
primaryDnsServerAddressSettable | xsd:boolean |
True if the host bus adapter supports setting its primary DNS.
|
subnetMaskSettable | xsd:boolean |
True if the host bus adapter supports setting its IPv4 subnet mask.
|
Properties inherited from DynamicData |
None |