|
Name
|
Type
|
Description
|
| bandwidthBps | xsd:long |
If the host acts as the sender, it's the value for the maximum achievable
bandwidth and if the host acts as the receiver, it's the value for the
actual network bandwidth in byte per second in the test
|
| client | xsd:boolean |
True indicates the host will act as the sender to send the multicast packet
to all of other hosts in the multicast performance test
|
| hostname | xsd:string |
The host name
|
| jitterMs | xsd:float |
The multicast packet jitter in millisecond in the multicast performance test.
It shows the average packet latency between sender and receiver. This value
will only be set for the host acting as receiver
|
| lossPct | xsd:long |
The percetage for the lost datagrams in the multicast performance test. This
value will only be set for the host acting as receiver
|
| lostDatagrams | xsd:long |
The number of lost datagrams in the multicast performance test. This value
will only be set for the host acting as receiver
|
| sentDatagrams | xsd:long |
The total number of sending datagrams in the multicast performance test. This
value will only be set for the host acting as receiver
|
| status | xsd:string |
The host network load test status. The status will be in red if the multicast speed
is less than 20 MB/s, the status will be yellow if the speed is between 20MB/s and
50MB/s and it's green if the speed is larger than 50MB/s
|
| totalBytes | xsd:long |
The total received or sent packet bytes in the multicast performance test
|
|
Properties inherited from DynamicData |
| None |