| Local Properties | ||
Managed Object Types | Data Object Types | All Properties | All Methods |
Properties
Name | Type | Description |
---|---|---|
ioLatencyThreshold* | xsd:int |
Storage DRS makes storage migration recommendations if
I/O latency on one (or more) of the datastores is higher than
the specified threshold.
Unit: millisecond.
The valid values are in the range of 5 to 100. If not specified,
the default value is 15.
|
ioLoadImbalanceThreshold* | xsd:int |
Storage DRS makes storage migration recommendations if
I/O load imbalance level is higher than the specified threshold.
Unit: a number.
The valid values are in the range of 1 to 100. If not specified,
the default value is 5.
|
reservableIopsThreshold* | xsd:int |
Storage DRS makes storage migration recommendations if total
IOPs reservation of all VMs running on a datastore is higher than
the specified threshold. Storage DRS recommends migration out of
all such datastores, if more than one datastore exceed their reserved
IOPs threshold.
This is an advanced option, and should only be used if Storage DRS estimated IOPs capacity is incorrect for datastores. The value should be based on conservative estimate of storage performance, and ideally should be set to about 50-60% of worse case peak performance of backing LUN. Since vSphere API 6.0 |
reservablePercentThreshold* | xsd:int |
Storage DRS makes storage migration recommendations if total
IOPs reservation of all VMs running on a datastore is higher than
the specified threshold. Storage DRS recommends migration out of
all such datastores, if more than one datastore exceed their reserved
IOPs threshold.
The actual Iops used to determine threshold are computed from Storage DRS estimation of IOPs capacity of a datastore. The absolute value may change over time, according to storage response to workloads. The valid values are in the range of 30 (i.e., 30%) to 100 (i.e., 100%). If not specified, the default value is 60%. Since vSphere API 6.0 |
reservableThresholdMode* | xsd:string |
Determines which reservation threshold specification to use.
See StorageDrsPodConfigInfoBehavior. If unspecified, the
mode is assumed automatic by default. Storage DRS uses
percentage value in that case.
If mode is specified, but corresponding reservationThreshold
value is absent, option specific defaults are used.
Since vSphere API 6.0 |
Properties inherited from DynamicData | ||
None |
Top of page | Local Properties | ||
Managed Object Types | Data Object Types | All Properties | All Methods |