Configure vMA to Use a DHCP Server

You can reconfigure vMA to use a DHCP server instead of using a static IP address.

Configure vMA to Use a DHCP Server from the Console

To configure vMA to use a DHCP server from the console

1	On the vMA console, select Configure Network and press Enter.

2	Select menu option 6 to configure the IP address.

3	If you want to configure an IPv6 address, type y and press Enter.

a	Type y and press Enter to use a DHCP server.

b	Provide the details of the DHCP server.

4	If you want to configure an IPv4 address, type y and press Enter.

a	Type y and press Enter to use a DHCP server.

b	Provide the details of the DHCP server.

5	To configure the other network settings, such as DNS and default gateway, select the appropriate menu option and provide the required network configuration details.

Configure vMA to Use a DHCP Server from the Web UI

To configure vMA to use a DHCP server from the web UI

1	Log in to the web UI.

2	Open the Network page and click the Address tab.

3	Select the Obtain configuration from DHCP server option.

4	Click Save Settings.