Networking
>
Layer 3
>
Logical Gateway
>
Routing
>
OSPF
get logical-router <dpd-uuid-lrouter-arg> ospf
Display OSPF information.
Parameters:
| <uuid> |
Datapath UUID argument |
Example:
nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be ospf
OSPF Routing Process, Router ID: 40.40.40.1
Supports only single TOS (TOS0) routes
This implementation conforms to RFC2328
RFC1583Compatibility flag is disabled
OpaqueCapability flag is disabled
Initial SPF scheduling delay 0 millisec(s)
Minimum hold time between consecutive SPFs 50 millisec(s)
Maximum hold time between consecutive SPFs 5000 millisec(s)
Hold time multiplier is currently 1
SPF algorithm last executed 7.813s ago
Last SPF duration 19 usecs
SPF timer is inactive
LSA minimum interval 5000 msecs
LSA minimum arrival 1000 msecs
Write Multiplier set to 20
Refresh timer 10 secs
Maximum multiple paths(ECMP) supported 256
Number of external LSA 1. Checksum Sum 0x00007561
Number of opaque AS LSA 0. Checksum Sum 0x00000000
Number of areas attached to this router: 1
Area ID: 0.0.0.0 (Backbone)
Number of interfaces in this area: Total: 1, Active: 1
Number of fully adjacent neighbors in this area: 1
Area has no authentication
SPF algorithm executed 4 times
Number of LSA 3
Number of router LSA 2. Checksum Sum 0x00010d70
Number of network LSA 1. Checksum Sum 0x000071c7
Number of summary LSA 0. Checksum Sum 0x00000000
Number of ASBR summary LSA 0. Checksum Sum 0x00000000
Number of NSSA LSA 0. Checksum Sum 0x00000000
Number of opaque link LSA 0. Checksum Sum 0x00000000
Number of opaque area LSA 0. Checksum Sum 0x00000000
Mode:
Basic
Availability: