Networking
>
Layer 3
>
Logical Gateway
>
Routing
>
OSPF
get logical-router <dpd-uuid-lrouter-arg> ospf interface
Display OSPF interface information.
Parameters:
| <uuid> |
Datapath UUID argument |
Example:
nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be ospf interface
uplink-275 is up
ifindex 32, MTU 1500 bytes, BW 0 Mbit
Internet Address 40.40.40.1/24, Broadcast 40.40.40.255, Area 0.0.0.0
MTU mismatch detection: enabled
Router ID 40.40.40.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Backup, Priority 1
Designated Router (ID) 40.40.40.10, Interface Address 40.40.40.10
Backup Designated Router (ID) 40.40.40.1, Interface Address 40.40.40.1
Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 0.745s
Neighbor Count is 1, Adjacent neighbor count is 1
Mode:
Basic
Availability: