Networking
>
Layer 3
>
Logical Gateway
>
Routing
>
BGP
get logical-router <uuid> bgp neighbor <ip-address>
Display information about a specific BGP neighbor.
Parameters:
| <uuid> |
Datapath UUID argument |
| <ip-address> |
Network IP address argument |
Example:
nsx-edge-1> get logical-router 3a57c438-7ee9-4ba2-92ef-6f758931e1be bgp neighbor 2005::2828:280a
BGP neighbor is 2005::2828:280a, remote AS 1000, local AS 2000, external link
Administratively shut down
BGP version 4, remote router ID 0.0.0.0, local router ID 50.50.50.1
BGP state = Idle
Last read 2d16h06m, Last write never
Hold time is 180, keepalive interval is 60 seconds
Configured hold time is 4, keepalive interval is 1 seconds
Message statistics:
Inq depth is 0
Outq depth is 0
Sent Rcvd
Opens: 0 0
Notifications: 0 0
Updates: 0 0
Keepalives: 0 0
Route Refresh: 0 0
Capability: 0 0
Total: 0 0
Minimum time between advertisement runs is 0 seconds
For address family: IPv6 Unicast
Not part of any update group
Community attribute sent to this neighbor(all)
0 accepted prefixes
Connections established 0; dropped 0
Last reset never
BGP Connect Retry Timer in Seconds: 120
Read thread: off Write thread: off
BFD Status: Not configured
Mode:
Basic
Availability: