get ospf

Display OSPF information.

Example:

nsx-edge-1(tier0_sr)> get ospf OSPF Routing Process, Router ID: 40.40.40.1 Supports only single TOS (TOS0) routes This implementation conforms to RFC2328 RFC1583Compatibility flag is disabled OpaqueCapability flag is disabled Initial SPF scheduling delay 0 millisec(s) Minimum hold time between consecutive SPFs 50 millisec(s) Maximum hold time between consecutive SPFs 5000 millisec(s) Hold time multiplier is currently 1 SPF algorithm last executed 7.813s ago Last SPF duration 19 usecs SPF timer is inactive LSA minimum interval 5000 msecs LSA minimum arrival 1000 msecs Write Multiplier set to 20 Refresh timer 10 secs Maximum multiple paths(ECMP) supported 256 Number of external LSA 1. Checksum Sum 0x00007561 Number of opaque AS LSA 0. Checksum Sum 0x00000000 Number of areas attached to this router: 1 Area ID: 0.0.0.0 (Backbone) Number of interfaces in this area: Total: 1, Active: 1 Number of fully adjacent neighbors in this area: 1 Area has no authentication SPF algorithm executed 4 times Number of LSA 3 Number of router LSA 2. Checksum Sum 0x00010d70 Number of network LSA 1. Checksum Sum 0x000071c7 Number of summary LSA 0. Checksum Sum 0x00000000 Number of ASBR summary LSA 0. Checksum Sum 0x00000000 Number of NSSA LSA 0. Checksum Sum 0x00000000 Number of opaque link LSA 0. Checksum Sum 0x00000000 Number of opaque area LSA 0. Checksum Sum 0x00000000

Mode:

Tier0 SR

get ospf

Example:

Mode:

Availability: