get route static [<prefix>]
Display IPv4 Static routes for a specified prefix in RIB.
get route static command also displays
Tier 0 NAT, Tier 1 NAT, Tier 1 connected, Load balancer routes
along with Tier 0 & Tier 1 static routes
Parameters:
| <prefix> |
Network Address argument |
Example:
nsx-edge-1(tier0_sr)> get route static 1.1.0.0/16
Flags: t0c - Tier0-Connected, t0s - Tier0-Static, b - BGP,
t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected,
t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT,
t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route
Total number of routes: 2
t1c> * 1.1.2.0/24 [3/0] via 100.64.1.1, downlink-298, 21:10:43
t1c> * 1.1.1.0/25 [3/0] via 100.64.1.1, downlink-298, 21:10:43
Mode:
Tier0 SR
Availability: