set firewall <dpd-uuid-firewall-port-arg> local-ip <ip-address> sync-peer <nsxa-uuid-lrouter-port-arg> sync-peer-ip <ip-address>
Set the peer configuration for active/standby
configuration. This configuration happens automatically
when firewall rules are added to an active/standby
logical router via the NSX Manager web interface or API.
This command should be
used for advanced configuration or troubleshooting only.
If you manually configure the active/standby peer on an
edge node, you must also configure its peer.
Parameters:
| <uuid> |
Firewall logical interface UUID argument |
| <ip-address> |
Network IP address argument |
| <uuid> |
UUID argument |
Example:
nsx-edge> set firewall e159f0db-d8e4-4973-9cbb-8cc30def2c3e local-ip 192.168.250.62 sync-peer e159f0db-d8e4-4973-9cbb-8cc30def2c3e sync-peer-ip 192.168.250.63
nsx-edge>
Mode:
Basic
Availability: