System Administration
>
Configuration
>
Fabric
>
LLDP
get lldp neighbors <lldp-interface-name>
Displays LLDP Neighbor information on given device.
Parameters:
| <interface-name> |
LLDP interface argument |
Example:
nsx-edge-1> get lldp neighbors eth0
Device : eth0
Neighbor Count : 1
Neighbors
Neighbor : eth0/0:50:56:b7:7f:47
Life Time : 111
System Name : NSX ESG
System Desc : NSX Edge Services Gateway
System Cap : ['Router']
Enabled Cap : ['Router']
Chassis Id : eth0
Port Id : 0:50:56:b7:7f:47
Port Desc : management iface
Mgmt Address
Address : 10.172.139.51
Addr Family : IPv4
Iface Number : 2
Iface Type : 2
MAC PHY Status
AutoNeg : supported
AutoNeg Status: enabled
PMDAutoNeg : supported
PMDAutoNeg Status: not-enabled
MAU Type : 16
Power via MDI
Port Class : PSE
Power Source : supported
PSE MDI State : enabled
PSE Pair Ctrl : yes
PSE Pair : 1
PSE Class : 2
Link Aggregation
Aggr Capability: yes
Aggr Status : enabled
Aggr Port Id : 1
Mode:
Basic
Availability: