| Local Properties | ||
Managed Object Types | Data Object Types | All Properties | All Methods |
Properties
Name | Type | Description |
---|---|---|
cacheConfig* | xsd:string |
This field is not used.
|
cacheConfigOnHcl* | xsd:string[] |
Ignore this value.
|
cacheConfigSupported* | xsd:boolean |
Ignore this value.
|
cimProviderInfo* | VsanHostCimProviderInfo |
This field is not used.
|
controllerType* | xsd:string |
Refer to VsanControllerType See VsanControllerType Since vSAN API vSAN 7.0U3 |
deviceDisplayName* | xsd:string |
The human friendly product model description by which the controller
announces itself, e.g., "Intel Corporation PIIX4 ...".
|
deviceId* | xsd:long |
The deviceId of the PCI device, e.g. 48.
|
deviceName | xsd:string |
The device name used by ESX to refer to the device right now, e.g. vmhba1.
|
deviceOnHcl* | xsd:boolean |
If the device shows up on the HCL at all.
|
diskCapacity* | xsd:long |
The capacity of a disk under the controller. The Unit is byte.
Only applicable for devices like NVMe.
Since vSAN API vSAN 7.0U3 |
diskMode* | xsd:string |
The disk mode (all flash or hybrid) for the disks on the controller.
Since vSAN API 6.6 |
diskModeOnHcl* | xsd:string[] |
If the device shows up on the HCL, and is supported for the release of ESXi,
this field will show the supported disk mode on HCL.
Since vSAN API 6.6 |
diskModeSupported* | xsd:boolean |
If the device shows up on the HCL, and is supported for the release of ESXi,
this field checks if the disk mode of the controller is supported.
Since vSAN API 6.6 |
disks* | VsanHclDiskInfo[] |
Additional information about disks behind this controller, if available.
Since vSAN API 6.6 |
driverName* | xsd:string |
The name of the driver, e.g. mpt2sas.
|
driversOnHcl* | VsanHclDriverInfo[] |
If the device shows up on the HCL, and is supported for the release of ESXi,
this field will list the supported driver versions, as well as additional
information for each driver, like associated firmware.
Since vSAN API 6.6 |
driverVersion* | xsd:string |
The version of the driver as reported by the driver kernel module,
e.g. '4.23.01.00-9vmw'.
|
driverVersionsOnHcl* | xsd:string[] |
If the device shows up on the HCL, and is supported for the release of ESXi,
this field will list the supported driver versions.
|
driverVersionSupported* | xsd:boolean |
If the device shows up on the HCL, and is supported for the release of ESXi,
and the driver version is detected to be supported
|
extraInfo* | KeyValue[] |
Any additional information not explicitly modeled in API.
Can be used for vendor specific information about features
of a controller.
|
fwAuxVersion* | xsd:string |
Auxiliary firmware version. Some controllers use an additional firmware
version, e.g. a "bundle version" or "build version". If present, its
populated here.
Since vSAN API 6.6 |
fwVersion* | xsd:string |
Ignore this value.
|
fwVersionOnHcl* | xsd:string[] |
Ignore this value.
|
fwVersionSupported* | xsd:boolean |
Ignore this value.
|
issues* | LocalizedMethodFault[] |
Any issues detected with the configuration of the the controller.
Since vSAN API 6.6 |
productId* | xsd:string |
The product ID of a controller. Only applicable for devices like NVMe.
Since vSAN API vSAN 7.0U3 |
queueDepth* | xsd:long |
The maximum supported queue depth for the controller.
Since vSAN API 6.6 |
queueDepthOnHcl* | xsd:long |
If the device shows up on the HCL, and is supported for the release of ESXi,
this field will show the supported queue depth for the controller.
Since vSAN API 6.6 |
queueDepthSupported* | xsd:boolean |
If the device shows up on the HCL, and is supported for the release of ESX,
this field checks if the controller's queue depth is supported.
Since vSAN API 6.6 |
raidConfig* | xsd:string |
This field is not used.
|
raidConfigOnHcl* | xsd:string[] |
Ignore this value.
|
raidConfigSupported* | xsd:boolean |
Ignore this value.
|
releasesOnHcl* | xsd:string[] |
If the device is on the HCL, this holds the names of the supported releases.
|
releaseSupported* | xsd:boolean |
If the device is on the HCL and the release of ESXi in use is supported.
|
remediableIssues* | xsd:string[] |
Keys of issues which can be remediated.
Since vSAN API 6.6 |
subDeviceId* | xsd:long |
The subDeviceId of the PCI device, e.g. 5549.
|
subVendorId* | xsd:long |
The subVendorId of the PCI device, e.g. 6518.
|
toolName* | xsd:string |
The name of the vendor tool. E.g., perccli.
Since vSAN API vSAN 6.7U3 |
toolVersion* | xsd:string |
The version of the vendor tool.
Since vSAN API vSAN 6.7U3 |
usedByVsan* | xsd:boolean |
Used by vSAN. If not set, "True" should be assumed.
Since vSAN API 6.6 |
userSelectedVcgId* | xsd:int |
The vSAN VCG ID selected by the user. This field will be empty if user has
never made a selection, or this controller has a unique mapping to its vSAN
VCG entry originally.
Since vSAN API vSAN 7.0U3 |
vcgEntryInfo* | VsanVcgDeviceInfo[] |
A list of the matching models in vSAN VCG, the length of the list will
be larger than 1 if this controller's PCI ID is used by other devices like NVMe
on the vSAN VCG. Otherwise, the length will be 1, which means there is a
unique mapping from this controller to a vSAN VCG entry.
Since vSAN API vSAN 7.0U3 |
vendorId* | xsd:long |
The vendorId of the PCI device, e.g. 4096.
|
Properties inherited from DynamicData | ||
None |
Top of page | Local Properties | ||
Managed Object Types | Data Object Types | All Properties | All Methods |