| Local Properties | ||
Managed Object Types | Data Object Types | All Properties | All Methods |
Some terminology is borrowed from the NVM Express over Fabrics and the NVM Express 1.3 specifications, which are available at the following address: https://nvmexpress.org/resources/specifications/
Properties
Name | Type | Description |
---|---|---|
associatedAdapter | xsd:string |
Associated NVME over Fabrics host bus adapter.
A controller is associated with exactly one host at a time through
an NVME over Fabrics host bus adapter.
|
attachedNamespace* | HostNvmeNamespace[] |
List of NVME namespaces attached to the controller.
Namespaces provide access to a non-volatile storage medium which is part of the NVM subsystem. For an overview, see:
|
controllerNumber | xsd:int |
The controller number uniquely identifies the NVME Controller
within its HostSystem.
This should not be confused with Controller ID (see
"NVM Express over Fabrics 1.0", Section 4.2, "Controller model"
for details), which only serves as an identifier
within a particular NVME subsystem.
|
firmwareVersion* | xsd:string |
The firmware version of the controller, if available.
|
fusedOperationSupported | xsd:boolean |
Indicates whether fused operations are supported by the controller.
An NVME controller may support fused operations. This is required to support shared storage, otherwise data corruption may occur. For more details, see:
|
key | xsd:string |
The linkable identifier.
|
model* | xsd:string |
The model name of the controller, if available.
|
name | xsd:string |
Name of the controller.
Each controller has a name. For NVME over Fabrics controllers,
it is generated when the controller is connected to an NVME
over Fabrics adapter.
|
numberOfQueues | xsd:int |
The number of I/O queues allocated for the controller.
|
queueSize | xsd:int |
The size of each of the I/O queues.
This will not be greater than the Maximum Queue Entries Supported (mqes) value for the controller. For more information, see:
|
serialNumber* | xsd:string |
The serial number of the controller, if available.
|
subnqn | xsd:string |
The NVME subsystem qualified name.
Each NVME controller is associated with an NVME subsystem which can present a collection of controllers to the adapter. For more details, refer to:
|
transportType | xsd:string |
The transport type supported by the controller.
The set of possible values is described in HostNvmeTransportType. For details, see:
|
vendorId* | xsd:string |
The vendor ID of the controller, if available.
|
Properties inherited from DynamicData | ||
None |
Top of page | Local Properties | ||
Managed Object Types | Data Object Types | All Properties | All Methods |