|
Name
|
Type
|
Description
|
| address | xsd:string |
The advertised IP address that is assigned to the interface of the device
on which the CDP message is sent. The device can advertise all addresses for
a given protocol suite and, optionally, can advertise one or more loopback
IP addresses. But this property only show the first address.
|
| cdpVersion | xsd:int |
CDP version. The value is always 1.
|
| deviceCapability | PhysicalNicCdpDeviceCapability |
Device Capability
PhysicalNicCdpDeviceCapability
|
| devId | xsd:string |
Device ID which identifies the device. By default, the device ID is
either the device's fully-qualified host name (including the domain
name) or the device's hardware serial number in ASCII.
|
| fullDuplex | xsd:boolean |
Half/full duplex setting of the advertising port.
|
| hardwarePlatform | xsd:string |
Hardware platform. An ASCII character string that describes the
hardware platform of the device , e.g. "cisco WS-C2940-8TT-S"
|
| ipPrefix | xsd:string |
IP prefix. Each IP prefix represents one of the directly connected
IP network segments of the local route.
|
| ipPrefixLen | xsd:int |
ipPrefix length.
|
| location | xsd:string |
The configured location of the device.
|
| mgmtAddr | xsd:string |
The configured IP address of the SNMP management interface for the
device.
|
| mtu | xsd:int |
MTU, the maximum transmission unit for the advertising port. Possible
values are 1500 through 18190.
|
| portId | xsd:string |
Port ID. An ASCII character string that identifies the port on which
the CDP message is sent, e.g. "FastEthernet0/8"
|
| samples | xsd:int |
The number of CDP messages we have received from the device.
|
| softwareVersion | xsd:string |
Software version on the device. A character string that provides
information about the software release version that the device is
running. e.g. "Cisco Internetwork Operating Syscisco WS-C2940-8TT-S"
|
| systemName | xsd:string |
The configured SNMP system name of the device.
|
| systemOID | xsd:string |
The configured SNMP system OID of the device.
|
| timeout | xsd:int |
This is the periodicity of advertisement, the time between two
successive CDP message transmissions
|
| ttl | xsd:int |
Time-To-Live. the amount of time, in seconds, that a receiver should
retain the information contained in the CDP packet.
|
| vlan | xsd:int |
The native VLAN of advertising port. The native VLAN is the VLAN to
which a port returns when it is not trunking. Also, the native VLAN
is the untagged VLAN on an 802.1Q trunk.
|
|
Properties inherited from DynamicData |
| None |