Get the Realized State of a Logical Router Port

Return realized state information of a logical router port.
Any configuration update that affects the logical router port can use this API
to get its realized state by passing a request_id returned by the
configuration change operation. e.g. Update configuration of logical router ports,
dhcp relays, etc.

Request:

Method:

GET

URI Path(s):

/api/v1/logical-router-ports/<logical-router-port-id>/state

Request Headers:

n/a

Query Parameters:

RealizationStateQueryParameters+

Name	Description	Type	Notes
barrier_id	The system checks to ensure that the logical entity is realized or not at least at the given barrier number. This parameter has been deprecated. Please use request_id instead.	integer	Deprecated Minimum: 0
request_id	Realization request ID Passing a request_id allows you to check if the changes to a logical entity made in a particular API request have been realized or not. The request_id is returned from each API request in the X-NSX-REQUESTID header. For example, to check if a change to a firewall rule has been realized, save the X-NSX-REQUESTID header value returned from the PUT /api/v1/firewall/sections//rules/ call, then add ?request_id= to the GET /api/v1/firewall/rules//state API call.	string

Request Body:

n/a

Example Request:

GET https://<nsx-mgr>/api/v1/logical-router-ports/258c50b4-c960-4005-9023-f7946e302162/state

Successful Response:

Response Code:

200 OK

Response Headers:

Content-type: application/json

Response Body:

LogicalRouterPortState+

LogicalRouterPortState (schema)

Name	Description	Type	Notes
details	Array of configuration state of various sub systems	array of ConfigurationStateElement	Readonly
failure_code	Error code	integer	Readonly
failure_message	Error message in case of failure	string	Readonly
ipv6_dad_statuses	DAD Status Array of DAD status which contains DAD information for IP addresses on the port.	array of IPv6DADStatus	Readonly
pending_change_list	List of pending changes Request identifier of the API which modified the entity.	array of string	Readonly
state	Overall state of desired configuration Gives details of state of desired configuration. Additional enums with more details on progress/success/error states are sent for edge node. The success states are NODE_READY and TRANSPORT_NODE_READY, pending states are {VM_DEPLOYMENT_QUEUED, VM_DEPLOYMENT_IN_PROGRESS, REGISTRATION_PENDING} and other values indicate failures. "in_sync" state indicates that the desired configuration has been received by the host to which it applies, but is not yet in effect. When the configuration is actually in effect, the state will change to "success". Please note, failed state is deprecated.	string	Required Readonly Enum: pending, in_progress, success, failed, partial_success, orphaned, unknown, error, in_sync, NOT_AVAILABLE, VM_DEPLOYMENT_QUEUED, VM_DEPLOYMENT_IN_PROGRESS, VM_DEPLOYMENT_FAILED, VM_POWER_ON_IN_PROGRESS, VM_POWER_ON_FAILED, REGISTRATION_PENDING, NODE_NOT_READY, NODE_READY, VM_POWER_OFF_IN_PROGRESS, VM_POWER_OFF_FAILED, VM_UNDEPLOY_IN_PROGRESS, VM_UNDEPLOY_FAILED, VM_UNDEPLOY_SUCCESSFUL, EDGE_CONFIG_ERROR, VM_DEPLOYMENT_RESTARTED, REGISTRATION_FAILED, TRANSPORT_NODE_SYNC_PENDING, TRANSPORT_NODE_CONFIGURATION_MISSING, EDGE_HARDWARE_NOT_SUPPORTED, MULTIPLE_OVERLAY_TZS_NOT_SUPPORTED, TN_OVERLAY_TZ_IN_USE_BY_EDGE_CLUSTER, TZ_ENDPOINTS_NOT_SPECIFIED, NO_PNIC_PREPARED_IN_EDGE, APPLIANCE_INTERNAL_ERROR, VTEP_DHCP_NOT_SUPPORTED, UNSUPPORTED_HOST_SWITCH_PROFILE, UPLINK_HOST_SWITCH_PROFILE_NOT_SPECIFIED, HOSTSWITCH_PROFILE_NOT_FOUND, LLDP_SEND_ENABLED_NOT_SUPPORTED, UNSUPPORTED_NAMED_TEAMING_POLICY, LBSRCID_NOT_SUPPORTED_FOR_EDGE_VM, LACP_NOT_SUPPORTED_FOR_EDGE_VM, STANDBY_UPLINKS_NOT_SUPPORTED_FOR_EDGE_VM, MULTIPLE_ACTIVE_UPLINKS_NOT_SUPPORTED_FOR_EDGE, UNSUPPORTED_LACP_LB_ALGO_FOR_NODE, EDGE_NODE_VERSION_NOT_SUPPORTED, NO_PNIC_SPECIFIED_IN_TN, INVALID_PNIC_DEVICE_NAME, TRANSPORT_NODE_READY, VM_NETWORK_EDIT_PENDING, UNSUPPORTED_DEFAULT_TEAMING_POLICY, MPA_DISCONNECTED, VM_RENAME_PENDING, VM_CONFIG_EDIT_PENDING, VM_NETWORK_EDIT_FAILED, VM_RENAME_FAILED, VM_CONFIG_EDIT_FAILED, VM_CONFIG_DISCREPANCY, VM_NODE_REFRESH_FAILED, VM_PLACEMENT_REFRESH_FAILED, REGISTRATION_TIMEDOUT, REPLACE_FAILED, UPLINK_FROM_TEAMING_POLICY_NOT_MAPPED, LOGICAL_SWITCH_NAMED_TEAMING_HAS_NO_PNIC_BACKING, DELETE_VM_IN_REDEPLOY_FAILED, DEPLOY_VM_IN_REDEPLOY_FAILED, INSUFFICIENT_RESOURCES_IN_EDGE_NODE_FOR_SERVICE

Example Response:

{ "details": [ { "sub_system_type": "TransportNode", "sub_system_id": "fe651e63-04bd-43a4-a8ec-45381a3b71b9", "state": "in_progress", "failure_message": "CCP Id:ab5958df-d98a-468e-a72b-d89dcdae5346, Message:State realization is in progress at the node." }, { "sub_system_type": "TransportNode", "sub_system_id": "ebe174ac-e4f1-4135-ba72-3dd2eb7099e3", "state": "in_sync" } ], "state": "in_progress", "failure_message": "The state realization is in progress at transport nodes." }

Get the Realized State of a Logical Router Port

Request:

RealizationStateQueryParameters (schema)

Example Request:

Successful Response:

LogicalRouterPortState (schema)

Example Response:

Required Permissions:

Feature:

Additional Errors: