OSPF Interface configuration
OSPF Interface configuration.
| Name | Description | Type | Notes |
|---|---|---|---|
| bfd_path | Policy path of BFD profile This filed is valid only if enable_bfd is set to TRUE. If enable_bfd flag is set to TRUE, this profile will be applied to all OSPF peers in this interface. If this field is empty, bfd_path will refer to Tier-0 global BFD profile. |
string | |
| dead_interval | OSPF dead interval in seconds Specifies the number of seconds that router must wait before it declares a OSPF neighbor router down because it has not received OSPF hello packet. OSPF dead interval should be minimum 3 times greater than the hello interval |
int | Minimum: 3 Maximum: 65535 Default: "40" |
| enable_bfd | enable BFD for OSPF Enable/Disable OSPF to register for BFD event. Use FALSE to disable BFD. |
boolean | |
| enabled | enable/disable OSPF enable/disable OSPF on the interface. If enabled flag not specified, defailt is disable OSPF. |
boolean | Default: "False" |
| hello_interval | OSPF hello interval in seconds Specifies the interval between the hello packets that OSPF sends on this interface. OSPF hello interval should be less than the dead interval |
int | Minimum: 1 Maximum: 21845 Default: "10" |
| network_type | Configure OSPF networkt type Configure OSPF networkt type, default is BROADCAST network type |
string | Enum: BROADCAST, P2P Default: "BROADCAST" |
| ospf_area | Attach Tier0 Interface to specified OSPF Area Attache Tier0 Interface to specified OSPF Area. all peers. |
string | Required |