Class CIM_WiFiEndpointSettings


  extends CIM_SettingData
CIM_WiFiEndpointSettings describes setting data that can be applied to an instance of CIM_WiFiEndpoint to enable it to associate to a particular Wi-Fi network.
Details...
This class is not implemented.

Class Qualifiers

NameData TypeValueScopeFlavors
DescriptionstringCIM_WiFiEndpointSettings describes setting data that can be applied to an instance of CIM_WiFiEndpoint to enable it to associate to a particular Wi-Fi network.None TRANSLATABLE= true
UMLPackagePathstringCIM::Network::WirelessNone None
Versionstring2.22.0TOSUBCLASS= falseTRANSLATABLE= true

Local Class Properties

NameData TypeQualifiers
NameData TypeValueScopeFlavors
AuthenticationMethoduint16
DescriptionstringAuthenticationMethod shall specify the 802.11 authentication method used when the settings are applied. * Other (1): shall indicate that the desired authentication method is not specified in the list below. If AuthenticationMethod contains 1, OtherAuthenticationMethod should not be NULL and should not be empty. * Open System (2): shall indicate that the desired authentication method is Open System. AuthenticationMethod should contain 2 only if EncryptionMethod contains 2 ("WEP") or 5 ("None"). * Shared Key (3): shall indicate that the desired authentication method is Shared Key. AuthenticationMethod should contain 3 only if EncryptionMethod contains 2 ("WEP") or 5 ("None"). * WPA PSK (4): shall indicate that the desired authentication method is WPA (Wi-Fi Protected Access) PSK (Pre-Shared Key). AuthenticationMethod should contain 4 only if EncryptionMethod contains 3 ("TKIP") or 4 ("CCMP"). * WPA IEEE 802.1x (5): shall indicate that the desired authentication method is WPA (Wi-Fi Protected Access) IEEE 802.1x. AuthenticationMethod should contain 5 only if EncryptionMethod contains 3 ("TKIP") or 4 ("CCMP"). * WPA2 PSK (6): shall indicate that the desired authentication method is WPA2 (Wi-Fi Protected Access Version 2) PSK (Pre-Shared Key). AuthenticationMethod should containt 6 only if EncryptionMethod contains 3 ("TKIP") or 4 ("CCMP"). * WPA2 IEEE 802.1x (7): shall indicated that the desired authentication method is WPA2 (Wi-Fi Protected Access Version 2) IEEE 802.1x. AuthenticationMethod should contain 7 only if EncryptionMethod contains 3 ("TKIP") or 4 ("CCMP").None TRANSLATABLE= true
MappingStringsstringIEEE 802.11-2007 | 8None None
ModelCorrespondencestringCIM_WiFiEndpoint.AuthenticationMethod, CIM_WiFiEndpointSettings.EncryptionMethod, CIM_WiFiEndpointSettings.OtherAuthenticationMethodNone None
ValueMapstring1, 2, 3, 4, 5, 6, 7, 8..None None
ValuesstringOther, Open System, Shared Key, WPA PSK, WPA IEEE 802.1x, WPA2 PSK, WPA2 IEEE 802.1x, DMTF ReservedNone TRANSLATABLE= true
BSSTypeuint16
DescriptionstringBSSType shall indicate the Basic Service Set (BSS) Type that shall be used when the settings are applied. A Basic Service Set is a set of stations controlled by a single coordination function. * Independent: the WiFiEndpoint is associated directly to another client station. * Infrastructure: the WiFiEndpoint is associated to a network via an access point.None TRANSLATABLE= true
MappingStringsstringIEEE 802.11-2007 | 3.16None None
ValueMapstring0, 2, 3, ..None None
ValuesstringUnknown, Independent, Infrastructure, DMTF ReservedNone TRANSLATABLE= true
Captionstring
DescriptionstringThe Caption property is a short textual description (one- line string) of the object.None TRANSLATABLE= true
MaxLenuint3264None None
Descriptionstring
DescriptionstringThe Description property provides a textual description of the object.None TRANSLATABLE= true
ElementNamestring
DescriptionstringThe user-friendly name for this instance of SettingData. In addition, the user-friendly name can be used as an index property for a search or query. (Note: The name does not have to be unique within a namespace.)None TRANSLATABLE= true
OverridestringElementNameTOSUBCLASS= falseNone
RequiredbooleantrueNone OVERRIDABLE= false
EncryptionMethoduint16
DescriptionstringEncryptionMethod shall specify the 802.11 encryption method used when the settings are applied. * Other (1): shall indicate that the desired encryption method is not specified in the list below. If this value is used, OtherEncryptionMethod should not be NULL and should not be empty. * WEP (2): shall indicate that the desired encryption method is Wired Equivalency Privacy (WEP). This value should be used only if AuthenticationMethod contains 2 ("Open System") or 3 ("Shared Key"). * TKIP (3): shall indicate that the desired encryption method is Temporal Key Integrity Protocol (TKIP). This value should be used only if AuthenticationMethod contains 4 ("WPA PSK"), 5 ("WPA IEEE 802.1x"), 6 ("WPA2 PSK"), or 7 ("WPA2 IEEE 802.1x"). * CCMP (4): shall indicate that the desired encryption method is Counter Mode with Cipher Block Chaining Message Authentication Code Protocol (CCMP). This value should be used only if AuthenticationMethod contains 4 ("WPA PSK"), 5 ("WPA IEEE 802.1x"), 6 ("WPA2 PSK"), or 7 ("WPA2 IEEE 802.1x"). * None (5): shall indicate that no encryption is desired. This value should be used only if AuthenticationMethod contains 2 ("Open System") or 3 ("Shared Key").None TRANSLATABLE= true
MappingStringsstringIEEE 802.11-2007 | 8None None
ModelCorrespondencestringCIM_WiFiEndpoint.EncryptionMethod, CIM_WiFiEndpointSettings.AuthenticationMethod, CIM_WiFiEndpointSettings.OtherEncryptionMethodNone None
ValueMapstring1, 2, 3, 4, 5, 6..None None
ValuesstringOther, WEP, TKIP, CCMP, None, DMTF ReservedNone TRANSLATABLE= true
InstanceIDstring
DescriptionstringWithin the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm: <OrgID>:<LocalID> Where <OrgID> and <LocalID> are separated by a colon (:), and where <OrgID> must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the <Schema Name>_<Class Name> structure of Schema class names.) In addition, to ensure uniqueness, <OrgID> must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between <OrgID> and <LocalID>. <LocalID> is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance. For DMTF-defined instances, the "preferred" algorithm must be used with the <OrgID> set to CIM.None TRANSLATABLE= true
KeybooleantrueNone OVERRIDABLE= false
OverridestringInstanceIDTOSUBCLASS= falseNone
KeyIndexuint8
DescriptionstringKeyIndex shall contain the index of the active key in the Keys array property. KeyIndex should be non-NULL if and only Keys is non-NULL.None TRANSLATABLE= true
MappingStringsstringMIB.IETF|IEEE 802.11 MIB.dot11WEPDefaultKeyIDNone None
ModelCorrespondencestringCIM_WiFiEndpointSettings.KeysNone None
Keysstring
ArrayTypestringIndexedNone OVERRIDABLE= false
DescriptionstringKeys shall contain the default WEP encryption keys. Keys should be non-NULL if and only if EncryptionMethod contains 2 ("WEP").None TRANSLATABLE= true
MappingStringsstringMIB.IETF|IEEE 802.11 MIB.dot11WEPDefaultKeysNone None
ModelCorrespondencestringCIM_WiFiEndpointSettings.KeyIndex, CIM_WiFiEndpointSettings.EncryptionMethodNone None
OctetStringbooleantrueNone OVERRIDABLE= false
OtherAuthenticationMethodstring
DescriptionstringOtherAuthenticationMethod shall specify the 802.11 authentication method used when the settings are applied if and only if AuthenticationMethod contains "Other". The format of this string shall be vendor-specific.None TRANSLATABLE= true
ModelCorrespondencestringCIM_WiFiEndpoint.OtherAuthenticationMethod, CIM_WiFiEndpointSettings.AuthenticationMethodNone None
OtherEncryptionMethodstring
DescriptionstringOtherEncryptionMethod shall specify the 802.11 encryption method used when the settings are applied if and only if EncryptionMethod contains "Other". The format of this string shall be vendor-specific.None TRANSLATABLE= true
ModelCorrespondencestringCIM_WiFiEndpoint.OtherEncryptionMethod, CIM_WiFiEndpointSettings.EncryptionMethodNone None
Priorityuint8
DescriptionstringPriority shall indicate the priority of the instance among all WiFiEndpointSettings instances.None TRANSLATABLE= true
PSKPassPhrasestring
DescriptionstringAn ASCII alphanumeric string used to generate a PSK (pre-shared key). PSKPassPhrase and PSKValue should not both be non-NULL. PSKPassPhrase should be NULL if AuthenticationMethod does not contain 4 ("WPA PSK") or 6 ("WPA2 PSK").None TRANSLATABLE= true
MappingStringsstringMIB.IETF|IEEE 802.11 MIB.dot11RSNAConfigPSKPassPhraseNone None
MaxLenuint3263None None
MinLenuint328None None
ModelCorrespondencestringCIM_WiFiEndpointSettings.PSKValue, CIM_WiFiEndpointSettings.AuthenticationMethodNone None
PSKValueuint8
DescriptionstringThe actual binary value of a PSK (pre-shared key). PSKValue and PSKPassPhrase should not both be non-NULL. PSKValue should be NULL if AuthenticationMethod does not contain 4 ("WPA PSK") or 6 ("WPA2 PSK").None TRANSLATABLE= true
MappingStringsstringMIB.IETF|IEEE 802.11 MIB.dot11RSNAConfigPSKValueNone None
ModelCorrespondencestringCIM_WiFiEndpointSettings.PSKPassPhrase, CIM_WiFiEndpointSettings.AuthenticationMethodNone None
OctetStringbooleantrueNone OVERRIDABLE= false
SSIDstring
DescriptionstringSSID shall indicate the Service Set Identifier (SSID) that shall be used when the settings are applied to a WiFiEndpoint. An SSID identifies a wireless network.None TRANSLATABLE= true
MappingStringsstringIEEE 802.11-2007 | 7.3.2.1None None

Copyright © 2008-2016 VMware, Inc. All rights reserved.