| Name | Data Type | Qualifiers |
| Name | Data Type | Value | Scope | Flavors |
| AddressErrors | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of frames received with unknown addressing. An example is an unknown SID or DID. The SID or DID is not known to the routing algorithm. | None | TRANSLATABLE= true |
| BufferCreditNotProvided | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit was transitioned to zero. There is no credit to provide to the other side. | None | TRANSLATABLE= true |
| BufferCreditNotReceived | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of transitions in or out of BBcredit zero state. The other side is not providing any credit. | None | TRANSLATABLE= true |
| BytesReceived | uint64 |
| Counter | boolean | true | None | None |
| Description | string | The total number of bytes that are received, including framing characters. | None | TRANSLATABLE= true |
| MappingStrings | string | MIB.IETF|MIB-II.ifInOctets, MIF.DMTF|Network Adapter 802 Port|001.9 | None | None |
| PUnit | string | byte | None | None |
| Units | string | Bytes | None | TRANSLATABLE= true |
| BytesTransmitted | uint64 |
| Counter | boolean | true | None | None |
| Description | string | The total number of bytes that are transmitted, including framing characters. | None | TRANSLATABLE= true |
| MappingStrings | string | MIB.IETF|MIB-II.ifOutOctets, MIF.DMTF|Network Adapter 802 Port|001.7 | None | None |
| PUnit | string | byte | None | None |
| Units | string | Bytes | None | TRANSLATABLE= true |
| Caption | string |
| Description | string | The Caption property is a short textual description (one- line string) of the object. | None | TRANSLATABLE= true |
| MaxLen | uint32 | 64 | None | None |
| Class1FBSY | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Class1FBSY is the number of times that FBSY was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C1FB | None | None |
| Class1FRJT | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Class1FRJT is the number of times that FRJT was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C1FR | None | None |
| Class1PBSY | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Class1PBSY is the number of times that PBSY was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C1PB | None | None |
| Class1PRJT | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Class1PRJT is the number of times that PRJT was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C1PR | None | None |
| Class2FBSY | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Class2FBSY is the number of times that FBSY was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C2FB | None | None |
| Class2FRJT | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Class2FRJT is the number of times that FRJT was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C2FR | None | None |
| Class2PBSY | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Class2PBSY is the number of times that PBSY was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C2PB | None | None |
| Class2PRJT | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Class2PRJT is the number of times that PRJT was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C2PR | None | None |
| Class3FramesDiscarded | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Class3FramesDiscarded is the number of class 3 frames that were discarded upon reception. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C3DC | None | None |
| CRCErrors | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Number of times that the CRC in a frame does not match the CRC that is computed by the receiver. This count is part of the Link Error Status Block (LESB). | None | TRANSLATABLE= true |
| DelimiterErrors | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of invalid frame delimiters that are received at this port. An example is a frame with a class 2 start and a class 3 at the end. | None | TRANSLATABLE= true |
| Description | string |
| Description | string | The Description property provides a textual description of the object. | None | TRANSLATABLE= true |
| DumpedFrames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | DumpedFrames is the number of frames that were lost due to a lack of host buffers available. | None | TRANSLATABLE= true |
| ElementName | string |
| Description | string | The user friendly name for this instance of StatisticalData. In addition, the user friendly name can be used as a index property for a search of query. (Note: Name does not have to be unique within a namespace.) | None | TRANSLATABLE= true |
| Override | string | ElementName | TOSUBCLASS= false | None |
| Required | boolean | true | None | OVERRIDABLE= false
|
| EncodingDisparityErrors | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of disparity errors that are received at this port. | None | TRANSLATABLE= true |
| ErrorFrames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | ErrorFrames is the number of frames that have been received in error. | None | TRANSLATABLE= true |
| FBSYFrames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | FBSYFrames is the number of times that FBSY was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|ErrorCounters|1.SWAPI_STATS_LBL_FBSY | None | None |
| FramesTooLong | uint64 |
| Counter | boolean | true | None | None |
| Description | string | The number of frames received that were longer than 2140 octets. The value of 2140 is calculated based on an assumption of 24 header bytes plus 4 CRC bytes and 2112 bytes of payload. | None | TRANSLATABLE= true |
| FramesTooShort | uint64 |
| Counter | boolean | true | None | None |
| Description | string | The number of frames received that were shorter than 28 octets. The value of 28 is calculated based on an assumption of 24 header bytes plus 4 CRC bytes. The count does not include SOF/EOF bytes, which are not data. | None | TRANSLATABLE= true |
| FRJTFrames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | FRJTFrames is the number of times that FRJT was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|ErrorCounters|1.SWAPI_STATS_LBL_FRJT | None | None |
| Generation | uint64 |
| Description | string | Generation is an optional, monotonically increasing property that may be used to identify a particular generation of the resource represented by this class.
If Generation is supported by the implementation, its value shall not be null.
Except as otherwise specified, a value (including null) of Generation specified at creation time shall be replaced by null if Generation is not supported by the implementation or shall be a, (possibly different), non-null value if the implementation does support Generation.
After creation and if supported, Generation shall be updated, at least once per access, whenever the represented resource is modified, regardless of the source of the modification.
Note: the Generation value only needs to be updated once between references, even if the resource is updated many times. The key point is to assure that it will be different if there have been updates, not to count each update.
Note: unless otherwise specified, the value of Generation within one instance is not required to be coordinated with the value of Generation in any other instance.
Note:the semantics of the instance, (as defined by its creation class), define the underlying resource. That underlying resource may be a collection or aggregation of resources. And, in that case, the semantics of the instance further define when updates to constituent resources also require updates to the Generation of the collective resource. Default behavior of composite aggregations should be to update the Generation of the composite whenever the Generation of a component is updated.
Subclasses may define additional requirements for updates on some or all of related instances.
For a particular instance, the value of Generation may wrap through zero, but the elapsed time between wraps shall be greater than 10's of years.
This class does not require Generation to be unique across instances of other classes nor across instances of the same class that have different keys. Generation shall be different across power cycles, resets, or reboots if any of those actions results in an update. Generation may be different across power cycles, resets, or reboots if those actions do not result in an update. If the Generation property of an instance is non-null, and if any attempt to update the instance includes the Generation property, then if it doesn't match the current value, the update shall fail.
The usage of this property is intended to be further specified by applicable management profiles.
Typically, a client will read the value of this property and then supply that value as input to an operation that modifies the instance in some means. This may be via an explicit parameter in an extrinsic method or via an embedded value in an extrinsic method or intrinsic operation.
For example: a profile may require that an intrinsic instance modification supply the Generation property and that it must match for the modification to succeed. | None | TRANSLATABLE= true |
| Experimental | boolean | true | TOSUBCLASS= false | None |
| InstanceID | string |
| Description | string | Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. In order to ensure uniqueness within the NameSpace, the value of InstanceID SHOULD be constructed using the following 'preferred' algorithm:
<OrgID>:<LocalID>
Where <OrgID> and <LocalID> are separated by a colon ':', and where <OrgID> MUST include a copyrighted, trademarked or otherwise unique name that is owned by the business entity creating/defining the InstanceID, or is a registered ID that is assigned to the business entity by a recognized global authority (This is similar to the <Schema Name>_<Class Name> structure of Schema class names.) In addition, to ensure uniqueness <OrgID> MUST NOT contain a colon (':'). When using this algorithm, the first colon to appear in InstanceID MUST appear between <OrgID> and <LocalID>.
<LocalID> is chosen by the business entity and SHOULD not be re-used to identify different underlying (real-world) elements. If the above 'preferred' algorithm is not used, the defining entity MUST assure that the resultant InstanceID is not re-used across any InstanceIDs produced by this or other providers for this instance's NameSpace.
For DMTF defined instances, the 'preferred' algorithm MUST be used with the <OrgID> set to 'CIM'. | None | TRANSLATABLE= true |
| Key | boolean | true | None | OVERRIDABLE= false
|
| Override | string | InstanceID | TOSUBCLASS= false | None |
| InvalidTransmissionWords | uint64 |
| Counter | boolean | true | None | None |
| Description | string | The number of transmission words that had an invalid character (8b10b code violation) in one or more of its characters, had a K28.5 (8b10b control) in its second, third, or fourth character position, or had an incorrect Beginning Running Disparity. This count is part of the Link Error Status Block (LESB). | None | TRANSLATABLE= true |
| LinkFailures | uint64 |
| Counter | boolean | true | None | None |
| Description | string | LinkFailure is the number of times that a link error has occurred. This count is part of the Link Error Status Block (LESB). | None | TRANSLATABLE= true |
| LinkResetsReceived | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of Link resets. This count is the number of LRs received. | None | TRANSLATABLE= true |
| LinkResetsTransmitted | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of Link resets. This count is the number of LRs transmitted. | None | TRANSLATABLE= true |
| LIPCount | uint64 |
| Counter | boolean | true | None | None |
| Description | string | LIPCount is the number of LIP events that have occurred on an arbitrated loop. | None | TRANSLATABLE= true |
| LossOfSignalCounter | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Number of times the signal is lost on the Port since the last reset of the Device. This count is part of the Link Error Status Block (LESB). | None | TRANSLATABLE= true |
| LossOfSyncCounter | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Number of times that synchronization is lost on the Port since the last reset of the Device. Synchronization is assumed lost after a timeout period (identified by the Receiver TransmitterTimeout property) is exceeded. This count is part of the Link Error Status Block (LESB). | None | TRANSLATABLE= true |
| MulticastFramesReceived | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of Multicast Frames or Packets received. | None | TRANSLATABLE= true |
| MulticastFramesTransmitted | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of Multicast Frames or Packets transmitted. | None | TRANSLATABLE= true |
| NOSCount | uint64 |
| Counter | boolean | true | None | None |
| Description | string | NOSCount is the number of NOS events that have occurred on the switched fabric. | None | TRANSLATABLE= true |
| PacketsReceived | uint64 |
| Counter | boolean | true | None | None |
| Description | string | The total number of packets that are received. | None | TRANSLATABLE= true |
| PacketsTransmitted | uint64 |
| Counter | boolean | true | None | None |
| Description | string | The total number of packets that are transmitted. | None | TRANSLATABLE= true |
| PBSYFrames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | PBSYFrames is the number of times that PBSY was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|ErrorCounters|1.SWAPI_STATS_LBL_PBSY | None | None |
| PrimitiveSeqProtocolErrCount | uint64 |
| Counter | boolean | true | None | None |
| Description | string | Count of primitive sequence protocol errors that are detected at this port. This count is part of the Link Error Status Block (LESB). | None | TRANSLATABLE= true |
| PRJTFrames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | PRJTFrames is the number of times that PRJT was returned to the port. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|ErrorCounters|1.SWAPI_STATS_LBL_PRJT | None | None |
| RXBroadcastFrames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | RXBroadcastFrames is the number of broadcast frames or packets received. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_RBCO | None | None |
| RXClass1Frames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | RXClass1Frames is the number of class 1 frames received. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C1RF | None | None |
| RXClass2Frames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | RXClass2Frames is the number of class 2 frames received. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C2RF | None | None |
| RXClass3Frames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | RXClass3Frames is the number of class 3 frames received. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C3RF | None | None |
| SampleInterval | datetime |
| Description | string | Some statistics are sampled at consistent time intervals. This property provides the sample interval so that client applications can determine the minimum time that new statistics should be pulled. If the statistics are not sampled at consistent time intervals, this property must be set to a zero time interval. | None | TRANSLATABLE= true |
| StartStatisticTime | datetime |
| Description | string | The time, relative to managed element where the statistic was collected, when the first measurement was taken. If the statistic is reset, the StartStatisticTime is the time when the reset was performed. | None | TRANSLATABLE= true |
| StatisticTime | datetime |
| Description | string | The time the most recent measurement was taken, relative to the managed element where the statistic was collected. | None | TRANSLATABLE= true |
| TXBroadcastFrames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | TXBroadcastFrames is the number of broadcast frames or packets transmitted. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_TBCO | None | None |
| TXClass1Frames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | TXClass1Frames is the number of class 1 frames transmitted. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C1TF | None | None |
| TXClass2Frames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | TXClass2Frames is the number of class 2 frames transmitted. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C2LF | None | None |
| TXClass3Frames | uint64 |
| Counter | boolean | true | None | None |
| Description | string | TXClass3Frames is the number of class 3 frames transmitted. | None | TRANSLATABLE= true |
| MappingStrings | string | FC-SWAPI.T11|PerformanceCounters|1.SWAPI_STATS_LBL_C3TF | None | None |
Copyright © 2008-2010 VMware, Inc. All rights reserved.