Class CIM_FilterCollectionSubscription

extends CIM_AbstractIndicationSubscription (Association)
CIM_IndicationSubscription describes a flow of Indications. The flow is specified by the referenced Filter, and directed to the referenced destination or process in the Handler. Property values of the referenced CIM_IndicationFilter instance and CIM_ListenerDestination instance MAY significantly effect the definition of the subscription. E.g., a subscription associated with a "Transient" destination MAY be deleted when the destination terminates or is no longer available.
Details...
This class is not implemented.

Class Qualifiers

Name	Data Type	Value	Scope	Flavors
Association	boolean	true	None	OVERRIDABLE= false
Description	string	CIM_IndicationSubscription describes a flow of Indications. The flow is specified by the referenced Filter, and directed to the referenced destination or process in the Handler. Property values of the referenced CIM_IndicationFilter instance and CIM_ListenerDestination instance MAY significantly effect the definition of the subscription. E.g., a subscription associated with a "Transient" destination MAY be deleted when the destination terminates or is no longer available.	None	TRANSLATABLE= true
Experimental	boolean	true	TOSUBCLASS= false	None
UMLPackagePath	string	CIM::Event	None	None
Version	string	2.15.0	TOSUBCLASS= false	TRANSLATABLE= true

Local Class Properties

Name	Data Type	Qualifiers
Name	Data Type	Name	Data Type	Value	Scope	Flavors
AlertOnStateChange	boolean
		Description	string	Set to TRUE if a Listener should receive an IndicationSubscriptionAlert if a state change affects the subscription. Otherwise it is set to FALSE.	None	TRANSLATABLE= true
		Experimental	boolean	true	TOSUBCLASS= false	None
FailureTriggerTimeInterval	uint64
		Description	string	The FailureTriggerTimeInterval is used by the client to specify a recommended minimum delay before the OnFatalErrorPolicy is implemented.	None	TRANSLATABLE= true
		PUnit	string	second	None	None
		Units	string	Seconds	None	TRANSLATABLE= true
LastIndicationIdentifier	string
		Description	string	The IndicationIdentifier for the last indication produced for this indication subscription.This property shall be updated when the indication is produced regardless if the indication was delivered to its destination.	None	TRANSLATABLE= true
		Experimental	boolean	true	TOSUBCLASS= false	None
		ModelCorrespondence	string	CIM_Indication.IndicationIdentifier	None	None
LastIndicationProductionDateTime	datetime
		Description	string	The date and time of the last time an indication was produced for this subscription. This property shall be updated when the indication is produced regardless if the indication was delivered to its destination.	None	TRANSLATABLE= true
		Experimental	boolean	true	TOSUBCLASS= false	None
		ModelCorrespondence	string	CIM_Indication.IndicationTime	None	None
OnFatalErrorPolicy	uint16
		Description	string	Defines the desired behavior for a subscription when a fatal error occurs in one of the Indication processing subcomponents (e.g., Indication processor, Indication or instance provider, or Indication handler) and the Indication cannot be successfully sent. Specifically, a failure implies that some aspect of Indication generation, processing or dispatch is no longer functioning and Indications may be lost. If the value of OnFatalErrorPolicy is 2 ("Ignore") or not set (NULL), the subscription MUST continue to be processed in a 'best effort' mode. This mode of operation can lead to unpredictable, and potentially misleading results, because Indications may be lost. If the value is 3 ("Disable"), the subscription MUST be disabled. With this policy, no new Indications will be generated or dispatched until the subscription is explicitly enabled. This is accomplished via the property, SubscriptionState. If the value is 4 ("Remove"), the subscription MUST be deleted. Selecting this policy has the same effect as issuing a DeleteInstance operation on this subscription instance.	None	TRANSLATABLE= true
		ValueMap	string	1, 2, 3, 4	None	None
		Values	string	Other, Ignore, Disable, Remove	None	TRANSLATABLE= true
OtherOnFatalErrorPolicy	string
OtherOnFatalErrorPolicy	string	Description	string	A string defining "Other" values for OnFatalErrorPolicy. This value MUST be set to a non NULL value when OnFatalErrorPolicy is set to a value of 1 ("Other"). For all other values, the OtherOnFatalErrorPolicy MUST be NULL.	None	TRANSLATABLE= true
OtherRepeatNotificationPolicy	string
OtherRepeatNotificationPolicy	string	Description	string	A string defining "Other" values for RepeatNotificationPolicy. This value MUST be set to a non NULL value when RepeatNotificationPolicy is set to a value of 1 ("Other"). For all other values, the OtherRepeatNotificationPolicy MUST be NULL.	None	TRANSLATABLE= true
OtherSubscriptionState	string
OtherSubscriptionState	string	Description	string	A string defining "Other" values for SubscriptionState. This value MUST be set to a non NULL value when SubscriptionState is set to a value of 1 ("Other"). For all other values, the OtherSubscriptionState MUST be NULL.	None	TRANSLATABLE= true
RepeatNotificationCount	uint16
RepeatNotificationCount	uint16	Description	string	Defines the count property for the repeat notification policy calculation.	None	TRANSLATABLE= true
RepeatNotificationGap	uint64
		Description	string	Defines the gap interval for the repeat notification policy calculation.	None	TRANSLATABLE= true
		PUnit	string	second	None	None
		Units	string	Seconds	None	TRANSLATABLE= true
RepeatNotificationInterval	uint64
		Description	string	Defines the time interval for the repeat notification policy calculation.	None	TRANSLATABLE= true
		PUnit	string	second	None	None
		Units	string	Seconds	None	TRANSLATABLE= true
RepeatNotificationPolicy	uint16
		Description	string	The RepeatNotificationPolicy property defines the desired behavior for handling Indications that report the occurrence of the same underlying event (e.g., the disk is still generating I/O errors and has not yet been repaired). The defined semantics for the RepeatNotificationCount, RepeatNotificationInterval, and RepeatNotificationGap properties depend on the value of RepeatNotificationPolicy, but values for these properties MUST be set if the property is defined for the selected policy. If the value of RepeatNotificationPolicy is 0 ("Unknown") or not set, no special processing for repeat Indications is defined by the subscription. The semantics associated with the handling of repeat Indications MAY be defined by the Indication processing subcomponents. If the value of RepeatNotificationPolicy is 2 ("None"), special processing of repeat Indications MUST NOT be performed. If the value is 3 ("Suppress") the first RepeatNotificationCount Indications, describing the same event, MUST be sent and all subsequent Indications for this event suppressed for the remainder of the time interval RepeatNotificationInterval. A new interval starts when the next Indication for this event is received. If the value of RepeatNotificationPolicy is 4 ("Delay") and an Indication is received, this Indication MUST be suppressed if, including this Indication, RepeatNoticationCount or fewer Indications for this event have been received during the prior time interval defined by RepeatNotificationInterval. If this Indication is the RepeatNotificationCount + 1 Indication, this Indication MUST be sent and all subsequent Indications for this event ignored until the RepeatNotificationGap has elapsed. A RepeatNotificationInterval MAY NOT overlap a RepeatNotificationGap time interval.	None	TRANSLATABLE= true
		ValueMap	string	0, 1, 2, 3, 4	None	None
		Values	string	Unknown, Other, None, Suppress, Delay	None	TRANSLATABLE= true
SubscriptionDuration	uint64
		Description	string	SubscriptionDuration defines the desired length of the subscription. Indications generated after the duration of the subscription has exceeded SubscriptionDuration MUST NOT be sent. The duration of a subscription MAY be changed by modifying this property. An expired subscription MAY be deleted and MUST NOT be modified. If the value of SubscriptionDuration is not set, the subscription MUST be treated as having no expiration date.	None	TRANSLATABLE= true
		PUnit	string	second	None	None
		Units	string	Seconds	None	TRANSLATABLE= true
		Write	boolean	true	None	None
SubscriptionInfo	string
		Description	string	Subscription identification information. May be used by the client or protocol to store subscription identification information.	None	TRANSLATABLE= true
		Experimental	boolean	true	TOSUBCLASS= false	None
		Write	boolean	true	None	None
SubscriptionStartTime	datetime
SubscriptionStartTime	datetime	Description	string	SubscriptionStartTime is the time the subscription was started. The value of this property is computed based on the notion of date and time of the ManagedSystemElement running the Indication processing subcomponents.	None	TRANSLATABLE= true
SubscriptionState	uint16
		Description	string	Indicates the current processing state of the subscription.	None	TRANSLATABLE= true
		ValueMap	string	0, 1, 2, 3, 4	None	None
		Values	string	Unknown, Other, Enabled, Enabled Degraded, Disabled	None	TRANSLATABLE= true
		Write	boolean	true	None	None
SubscriptionTimeRemaining	uint64
		Description	string	SubscriptionTimeRemaining is a computed value that provides a snapshot of the time remaining in the Subscription.	None	TRANSLATABLE= true
		PUnit	string	second	None	None
		Units	string	Seconds	None	TRANSLATABLE= true
TimeOfLastStateChange	datetime
TimeOfLastStateChange	datetime	Description	string	Date and time of the last state change. This value is based on the notion of local date and time of the Managed System Element running the Indication processing subcomponents.	None	TRANSLATABLE= true

Association References

Name	Class Origin	Reference Class
Filter	CIM_FilterCollectionSubscription	CIM_FilterCollection
Handler	CIM_FilterCollectionSubscription	CIM_ListenerDestination