Service - Machine

Class
VMware.Hv.Machine
See also
MachineDeleteSpec, MachineId, MachineInfo, MachineRegisterResult, MachineRegisterSpec, MachineSummaryView, MapEntry
Since
Horizon View 6.0


Service Description

Service interface for Machine. A Machine is a single instance of any one of the following: Virtual Machine (Managed), Physical Machine (Unmanaged)

Methods

Methods defined in this Service
Machine_CancelTasks, Machine_Delete, Machine_DeleteMachines, Machine_EnterMaintenanceMode, Machine_EnterMaintenanceModeMachines, Machine_ExitMaintenanceMode, Machine_ExitMaintenanceModeMachines, Machine_Get, Machine_GetInfos, Machine_GetSummaryView, Machine_GetSummaryViews, Machine_Rebuild, Machine_RebuildMachines, Machine_Recover, Machine_RecoverMachines, Machine_Register, Machine_Reset, Machine_ResetMachines, Machine_Restart, Machine_RestartMachines, Machine_Update

Machine_CancelTasks

Cancel pending tasks on the specified machines related to Linked-Clone rebalance/recompose/refresh operations.

Privileges

Privilege Description
POOL_SVI_IMAGE_MANAGEMENT Manage Composer Desktop Pool Image privilege is required on each of the machines to cancel the respective pending tasks.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifiers of the machines. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
PartialFailureFaultThrown if all operations were not successful, a PartialFailureFault will be thrown indicating cancel task on which machines were successful and which ones failed. The index of results in the PartialFailureFault corresponds to the machine's index in request. The result entry will contain either the original return type (on success) or an exception (on failure).
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_VIEW_COMPOSER_OPERATION_CANCELED if Machine was marked for cancelling the pending tasks.
VLSI_VIEW_COMPOSER_OPERATION_CANCEL_FAILED if failed to mark the Machine for cancelling the pending tasks.

Show WSDL type definition



Machine_Delete

Delete the machine.
Note :- If deleteFromDisk is true, then machine being deleted must not have any active user session, otherwise this operation would fail. Requires at least one of the listed privileges.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to delete Machine configuration.
POOL_MANAGEMENT privilege is required to delete Machine configuration.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

unique identifier of the machine to delete. MachineIds of this type must originate from the Machine service.
specMachineDeleteSpec

attributes needed to delete the Machine.
  • Optional parameter. If not specifing any value, this should be set to null.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_DELETED if Machine was deleted.
VLSI_MACHINE_DELETE_FAILED if the Machine delete failed.

Show WSDL type definition



Machine_DeleteMachines

Delete the machines. This applies only to managed Machines.
Note :- If deleteFromDisk is true, then machines being deleted must not have any active user session, otherwise this operation would fail. Requires at least one of the listed privileges.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to delete Machine configuration.
POOL_MANAGEMENT privilege is required to delete Machine configuration.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifiers of the machines to delete. MachineIds of this type must originate from the Machine service.
specMachineDeleteSpec

attributes needed to delete the Machines.
  • Optional parameter. If not specifing any value, this should be set to null.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
PartialFailureFaultThrown if delete operation fails on one or more Machines.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_DELETED if Machine was deleted.
VLSI_MACHINE_DELETE_FAILED if the Machine delete failed.

Show WSDL type definition



Machine_EnterMaintenanceMode

Mark the machine for maintenance. This operation puts the current machine into maintenance mode. This operation applies only to managed machines which do not belong to Instant Clone Engine desktops.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to perform maintenance.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

Unique identifier of the machine. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_MAINTENANCE if Machine entered maintenance mode successfully.
VLSI_MACHINE_MAINTENANCE_FAILED if the Machine failed to enter maintenance mode.

Show WSDL type definition



Machine_EnterMaintenanceModeMachines

Mark machines for maintenance. For each machine, this operation puts the current machine into maintenance mode. This operation applies only to managed machines which do not belong to Instant Clone Engine desktops.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to perform maintenance.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifier of the machines. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
PartialFailureFaultThrown if enter maintenance operation fails on one or more Machines.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_MAINTENANCE if Machine entered maintenance mode successfully.
VLSI_MACHINE_MAINTENANCE_FAILED if the Machine failed to enter maintenance mode.

Show WSDL type definition



Machine_ExitMaintenanceMode

Mark the machine out of maintenance. This operation takes the current machine out of maintenance mode. This operation applies only to managed machines which do not belong to Instant Clone Engine desktops.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to perform maintenance.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

Unique identifier of the machine. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_MAINTENANCE if Machine exited maintenance mode successfully.
VLSI_MACHINE_MAINTENANCE_FAILED if the Machine failed to exit maintenance mode.

Show WSDL type definition



Machine_ExitMaintenanceModeMachines

Mark machines out of maintenance. For each machine, this operation takes the current machine out of maintenance mode. This operation applies only to managed machines which do not belong to Instant Clone Engine desktops.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to perform maintenance.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifier of the machines. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
PartialFailureFaultThrown if exit maintenance operation fails on one or more Machines.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_MAINTENANCE if Machine exited maintenance mode successfully.
VLSI_MACHINE_MAINTENANCE_FAILED if the Machine failed to exit maintenance mode.

Show WSDL type definition



Machine_Get

Gets the MachineInfo for the specified machine entry

Privileges

Privilege Description
MACHINE_VIEW privilege is required to read Machine configuration.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

Unique identifier for the machine entry. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
MachineInfoThe MachineInfo

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Show WSDL type definition



Machine_GetInfos

Gets the MachineInfo for the specified machine entries

Privileges

Privilege Description
MACHINE_VIEW privilege is required to read Machine configuration.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifiers for the machine entries. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
MachineInfo[]The MachineInfo array

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Show WSDL type definition



Machine_GetSummaryView

Gets the MachineSummaryView for the specified machine entry

Privileges

Privilege Description
MACHINE_VIEW privilege is required to read Machine configuration.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

Unique identifier for the machine entry. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
MachineSummaryViewThe MachineSummaryView

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Show WSDL type definition



Machine_GetSummaryViews

Gets the MachineSummaryViews for the specified machine entries

Privileges

Privilege Description
MACHINE_VIEW privilege is required to read Machine configuration.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifiers for the machine entries. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
MachineSummaryView[]The MachineSummaryView array

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Show WSDL type definition



Machine_Rebuild

Mark the machine for rebuilding. This operation deletes the current machine and provisions a new machine with the same name. Usually this operation is performed to rebuild a dedicated machine that is in error state or otherwise unusable. This operation applies only to machines belonging to Full Clone desktops.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to rebuild Machine.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

Unique identifier of the machine to rebuild. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_REBUILD if Machine was rebuilt.
VLSI_MACHINE_REBUILD_FAILED if the Machine rebuild failed.

Show WSDL type definition



Machine_RebuildMachines

Mark machines for rebuilding. For each machine, this operation deletes the current machine and provisions a new machine with the same name. Usually this operation is performed to rebuild a dedicated machine that is in error state or otherwise unusable. This operation applies only to machines belonging to Full Clone desktops.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to rebuild Machine.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifier of the machines to rebuild. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
PartialFailureFaultThrown if one or more Machines cannot be rebuilt.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_REBUILD if Machine was rebuilt.
VLSI_MACHINE_REBUILD_FAILED if the Machine rebuild failed.

Show WSDL type definition



Machine_Recover

Mark the machine for recovery. This operation recovers machine that is in error state or otherwise unusable. This operation applies only to machines belonging to Instant Clone Engine desktops.
For floating Instant Clone Engine pools, this operation deletes the current machine and provisions a new machine from the latest image.
For dedicated Instant Clone Engine pools, this operation resyncs the current machine to the latest image. During this operation, the OS disk of specified machine will be replaced with the one that was generated based on the source template.
Note :- The machine being recovered must not have any active user session, otherwise this operation would fail. Requires at least one of the listed privileges.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to recover the Machine.
POOL_MANAGEMENT privilege is required to recover the Machine.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

Unique identifier of the machine to recover. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_RECOVERY_REQUESTED if Machine was marked for recovery.
VLSI_MACHINE_RECOVERY_REQUEST_FAILED if failed to mark the Machine for recovery.

Show WSDL type definition



Machine_RecoverMachines

Mark the machines for recovery. This operation recovers machines that are in error state or otherwise unusable. This operation applies only to machines belonging to Instant Clone Engine desktops.
For floating Instant Clone Engine pools, this operation deletes the current machines and provisions a machines from the latest image.
For dedicated Instant Clone Engine pools, this operation resyncs the current machines to the latest image. During this operation, the OS disk of specified machines will be replaced with the one that was generated based on the source template.
Note :- The machines being recovered must not have any active user session, otherwise this operation would fail. Requires at least one of the listed privileges.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to recover the Machines.
POOL_MANAGEMENT privilege is required to recover the Machines.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifiers of the machines to recover. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
PartialFailureFaultThrown if recover operation fails on one or more Machines.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_RECOVERY_REQUESTED if Machine was marked for recovery.
VLSI_MACHINE_RECOVERY_REQUEST_FAILED if failed to mark the Machine for recovery.

Show WSDL type definition



Machine_Register

Registers a machine.

Privileges

Privilege Description
GLOBAL_MACHINE_REGISTER Global machine registration privilege is required to register a machine.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
specMachineRegisterSpec

The specification for the register operation.

Return Value

Type Description
MachineRegisterResultThe registration result.

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidRequestThrown if the machine cannot be registered in the specified desktop.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_REGISTERED If the machine is successfully registered.
VLSI_MACHINE_REGISTRATION_FAILED If the machine could not be registered.

Show WSDL type definition



Machine_Reset

Reset the machine. This applies only to managed Machine.

Privileges

Privilege Description
MACHINE_REBOOT privilege is required to reset Machine.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

Unique identifier of the machine to reset. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_RESET if Machine was reset.
VLSI_MACHINE_RESET_FAILED if the Machine reset failed.

Show WSDL type definition



Machine_ResetMachines

Reset the machines. This applies only to managed Machines.

Privileges

Privilege Description
MACHINE_REBOOT privilege is required to reset Machine.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifier of the machines to reset. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
PartialFailureFaultThrown if one or more Machines cannot be reset.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_RESET if Machine was reset.
VLSI_MACHINE_RESET_FAILED if the Machine reset failed.

Show WSDL type definition



Machine_Restart

Restart the machine. This applies only to managed Machine.

Privileges

Privilege Description
MACHINE_REBOOT privilege is required to restart Machine.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

Unique identifier of the machine to restart. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_RESTART if Machine was restarted.
VLSI_MACHINE_RESTART_FAILED if the Machine restart failed.

Show WSDL type definition



Machine_RestartMachines

Restart the machines. This applies only to managed Machines.

Privileges

Privilege Description
MACHINE_REBOOT privilege is required to restart Machine.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idsMachineId[]

Array of unique identifier of the machines to restart. MachineIds of this type must originate from the Machine service.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
PartialFailureFaultThrown if one or more Machines cannot be restarted.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_RESTART if Machine was restarted.
VLSI_MACHINE_RESTART_FAILED if the Machine restart failed.

Show WSDL type definition



Machine_Update

Updates the machine.

Privileges

Privilege Description
MACHINE_MANAGEMENT privilege is required to update Machine configuration.

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the Machine used to make the method call.
idMachineId

The ID of the machine to update. MachineIds of this type must originate from the Machine service.
updatesMapEntry[]

The updates to apply
  • This parameter is an update map based on MachineInfo.

Return Value

Type Description
None

Faults

Type Description
EntityNotFoundThrown if any specified entity cannot be found.
InsufficientPermissionThrown if the user does not have sufficient permission to perform the operation.
InvalidArgumentThrown if any specified argument is invalid.
InvalidTypeThrown if the type of any specified argument is invalid.
UnexpectedFaultThrown if an unexpected error occurs while performing the operation.

Events

Event Description
VLSI_MACHINE_UPDATED for each Machine attribute that was updated.
VLSI_MACHINE_UPDATE_FAILED if the Machine update failed.

Show WSDL type definition