Managed Object - HostSystem(vim.HostSystem)

Property of
ActiveVMsBlockingEVC, AnswerFileStatusResult, ApplyHostProfileConfigurationResult, ApplyHostProfileConfigurationSpec, CannotEnableVmcpForCluster, CheckResult, ClusterDasAamNodeState, ClusterDasFailoverLevelAdvancedRuntimeInfoHostSlots, ClusterDasFdmHostState, ClusterDasHostRecommendation, ClusterDpmHostConfigInfo, ClusterDrsMigration, ClusterEVCManagerCheckResult, ClusterFailoverHostAdmissionControlInfoHostStatus, ClusterFailoverHostAdmissionControlPolicy, ClusterHostGroup, ClusterHostRecommendation, ClusterInitialPlacementAction, ComputeResource, ComputeResourceHostSPBMLicenseInfo, CpuIncompatible, DasHeartbeatDatastoreInfo, DatastoreHostMount, DatastoreNotWritableOnHost, DiagnosticManagerBundleInfo, DisallowedOperationOnFailoverHost, DistributedVirtualPort, DistributedVirtualSwitchHostMemberConfigInfo, DistributedVirtualSwitchHostMemberConfigSpec, DistributedVirtualSwitchManagerCompatibilityResult, DistributedVirtualSwitchManagerHostArrayFilter, DistributedVirtualSwitchPortCriteria, DrsVmotionIncompatibleFault, DvsOperationBulkFaultFaultOnHost, DVSSummary, EnvironmentBrowserConfigOptionQuerySpec, EVCModeUnsupportedByHosts, EVCUnsupportedByHostHardware, EVCUnsupportedByHostSoftware, FaultsByHost, FaultToleranceAntiAffinityViolated, FeatureRequirementsNotMet, FtIssuesOnHost, HostConfigInfo, HostEventArgument, HostListSummary, HostMemberRuntimeInfo, HostProfile, HostProfileCompleteConfigSpec, HostProfileHostBasedConfigSpec, HostProfileManagerHostToConfigSpecMap, HostProfileSerializedHostProfileSpec, HostProfileValidationFailureInfo, HostProtocolEndpoint, HostSpecification, HostSpecificationOperationFailed, HostVmfsRescanResult, HostVMotionCompatibility, IncompatibleHostForFtSecondary, InsufficientHostCapacityFault, InvalidHostState, InvalidProfileReferenceHost, IoFilterHostIssue, IORMNotSupportedHostOnDatastore, MigrationFeatureNotSupported, Network, NoCompatibleHost, NodeDeploymentSpec, NotEnoughLogicalCpus, NotSupportedDeviceForFT, OvfCreateImportSpecParams, PlacementAction, PlacementSpec, ProfileReferenceHostChangedEvent, QuiesceDatastoreIOForHAFailed, RuleViolation, StoragePlacementSpec, ThirdPartyLicenseAssignmentFailed, VAppCloneSpec, VirtualHardwareVersionNotSupported, VirtualMachineConfigOptionDescriptor, VirtualMachineRelocateSpec, VirtualMachineRuntimeInfo, VmAlreadyExistsInDatacenter, VMotionInterfaceIssue, VmWwnConflict, VsanHostConfigInfo, VsanUpgradeSystemAPIBrokenIssue, VsanUpgradeSystemAutoClaimEnabledOnHostsIssue, VsanUpgradeSystemHostsDisconnectedIssue, VsanUpgradeSystemMissingHostsInClusterIssue, VsanUpgradeSystemNetworkPartitionInfo, VsanUpgradeSystemUpgradeHistoryItem, VsanUpgradeSystemWrongEsxVersionIssue, VVolHostPE
Parameter to
ApplyHostConfig_Task, BrowseDiagnosticLog, CertMgrRefreshCACertificatesAndCRLs_Task, CertMgrRefreshCertificates_Task, CertMgrRevokeCertificates_Task, CheckAnswerFileStatus_Task, CheckCompatibility_Task, CheckLicenseFeature, CheckMigrate_Task, CheckPowerOn_Task, CheckVmConfig_Task, ClusterEnterMaintenanceMode, ConfigureLicenseSource, CreateChildVM_Task, CreateSecondaryVM_Task, CreateSecondaryVMEx_Task, CreateVM_Task, DeleteHostSpecification, DeleteHostSubSpecification, DisableFeature, EnableFeature, EnableSecondaryVM_Task, ExecuteHostProfile, ExportAnswerFile_Task, GenerateConfigTaskList, GenerateHostProfileTaskList_Task, GenerateLogBundles_Task, ImportVApp, LookupVmOverheadMemory, MarkAsVirtualMachine, MigrateVM_Task, MoveHostInto_Task, MoveInto_Task, PerformVsanUpgrade_Task, PowerOnVM_Task, QueryAnswerFileStatus, QueryConfigOption, QueryConfigTarget, QueryDescriptions, QueryDvsConfigTarget, QueryIORMConfigOption, QueryLicenseSourceAvailability, QueryLicenseUsage, QuerySupportedFeatures, QueryTargetCapabilities, QueryVMotionCompatibility, QueryVMotionCompatibilityEx_Task, RectifyDvsHost_Task, RectifyDvsOnHost_Task, RegisterChildVM_Task, RegisterVM_Task, ResolveInstallationErrorsOnHost_Task, RetrieveAnswerFile, RetrieveAnswerFileForProfile, RetrieveHostCustomizations, RetrieveHostCustomizationsForProfile, RetrieveHostSpecification, RevertToCurrentSnapshot_Task, RevertToSnapshot_Task, SetLicenseEdition, UpdateAnswerFile_Task, UpdateHostSpecification, UpdateHostSubSpecification, UpdateReferenceHost, ValidateHost, ValidateMigration
Returned by
AddHost_Task, HostSpecGetUpdatedHosts, QueryCompatibleHostForExistingDvs, QueryCompatibleHostForNewDvs, QueryUnmonitoredHosts
Extends
ManagedEntity
See also
AnswerFileStatusResult, ApplyHostProfileConfigurationResult, ApplyHostProfileConfigurationSpec, ComplianceResult, CryptoKeyId, CryptoKeyPlain, Datastore, HostCapability, HostConfigInfo, HostConfigManager, HostConnectInfo, HostConnectSpec, HostDatastoreBrowser, HostFlagInfo, HostHardwareInfo, HostIpmiInfo, HostLicensableResourceInfo, HostListSummary, HostMaintenanceSpec, HostRuntimeInfo, HostServiceTicket, HostSystemComplianceCheckState, HostSystemReconnectSpec, HostSystemRemediationState, HostSystemResourceInfo, HostSystemSwapConfiguration, HostTpmAttestationReport, Network, VirtualMachine, VirtualMachineConfigInfo


Managed Object Description

The HostSystem managed object type provides access to a virtualization host platform.

Invoking destroy on a HostSystem of standalone type throws a NotSupported fault. A standalone HostSystem can be destroyed only by invoking destroy on its parent ComputeResource. Invoking destroy on a failover host throws a DisallowedOperationOnFailoverHost fault. See ClusterFailoverHostAdmissionControlPolicy.

Properties

Name Type Description
answerFileValidationResult*AnswerFileStatusResult

Host answer file validation result.

Since vSphere API 6.7
answerFileValidationState*AnswerFileStatusResult

Host answer file validation state.

Since vSphere API 6.7
capability*HostCapability

Host capabilities. This might not be available for a disconnected host.
complianceCheckResult*ComplianceResult

The host profile compliance check result.

Since vSphere API 6.7
complianceCheckState*HostSystemComplianceCheckState

The host profile compliance check state.

Since vSphere API 6.7
config*HostConfigInfo

Host configuration information. This might not be available for a disconnected host.
configManagerHostConfigManager

Host configuration systems. In releases after vSphere API 5.0, vSphere Servers might not generate property collector update notifications for this property. To obtain the latest value of the property, you can use PropertyCollector methods RetrievePropertiesEx or WaitForUpdatesEx. If you use the PropertyCollector.WaitForUpdatesEx method, specify an empty string for the version parameter. Any other version value will not produce any property values as no updates are generated.
datastore* PManagedObjectReference[]
to a Datastore[]

A collection of references to the subset of datastore objects in the datacenter that are available in this HostSystem.
datastoreBrowser PManagedObjectReference
to a HostDatastoreBrowser

DatastoreBrowser to browse datastores for this host.
hardware*HostHardwareInfo

Hardware configuration of the host. This might not be available for a disconnected host.
licensableResourceHostLicensableResourceInfo

Information about all licensable resources, currently present on this host.

This information is used mostly by the modules, manipulating information in the LicenseManager. Developers of such modules should use this property instead of hardware.

NOTE: The values in this property may not be accurate for pre-5.0 hosts when returned by vCenter 5.0

Since vSphere API 5.0
network* PManagedObjectReference[]
to a Network[]

A collection of references to the subset of network objects in the datacenter that are available in this HostSystem.
precheckRemediationResult*ApplyHostProfileConfigurationSpec

The host profile precheck-remediation result.

Since vSphere API 6.7
remediationResult*ApplyHostProfileConfigurationResult

The host profile remediation result.

Since vSphere API 6.7
remediationState*HostSystemRemediationState

The host profile remediation state.

Since vSphere API 6.7
runtimeHostRuntimeInfo

Runtime state information about the host such as connection state.
summaryHostListSummary

Basic information about the host, including connection state.
systemResources*HostSystemResourceInfo

Reference for the system resource hierarchy, used for configuring the set of resources reserved to the system and unavailable to virtual machines.
vm*ManagedObjectReference[]
to a VirtualMachine[]

List of virtual machines associated with this host.
Properties inherited from ManagedEntity
alarmActionsEnabled, configIssue, configStatus, customValue, declaredAlarmState, disabledMethod, effectiveRole, name, overallStatus, parent, permission, recentTask, tag, triggeredAlarmState
Properties inherited from ExtensibleManagedObject
availableField, value
*May not be presentP Required privilege: System.View

Methods

Methods defined in this Managed Object
AcquireCimServicesTicket, ConfigureCryptoKey, DisconnectHost_Task, EnableCrypto, EnterLockdownMode, EnterMaintenanceMode_Task, ExitLockdownMode, ExitMaintenanceMode_Task, PowerDownHostToStandBy_Task, PowerUpHostFromStandBy_Task, PrepareCrypto, QueryHostConnectionInfo, QueryMemoryOverhead, QueryMemoryOverheadEx, QueryTpmAttestationReport, RebootHost_Task, ReconfigureHostForDAS_Task, ReconnectHost_Task, RetrieveHardwareUptime, ShutdownHost_Task, UpdateFlags, UpdateIpmi, UpdateSystemResources, UpdateSystemSwapConfiguration
Methods inherited from ManagedEntity
Destroy_Task, Reload, Rename_Task
Methods inherited from ExtensibleManagedObject
setCustomValue

AcquireCimServicesTicket(acquireCimServicesTicket)

Creates and returns a credential used to establish a remote connection to a Web Based Management (CIM) interface. Valid only when ESXi wbem authentication mode is set to password. The ticket provides the port for the service and sslThumbprint should be used by client to validate ssl connection. This ticket is valid for 2 minutes then will expire and is non-renewable.
Required Privileges
Host.Cim.CimInteraction
Since
VI API 2.5

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.

Return Value

Type Description
HostServiceTicket

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



ConfigureCryptoKey(configureCryptoKey)

Sets/changes the key to be used for coredump encryption and puts the host in safe state. This function will make the host crypto safe and unlock all encrypted VMs on the host. When the encryption on the host is enabled for the first time after adding it to vCenter Server, this method will start sending asynchronously all the encryption keys for VMs on the host and cluster to unlock encrypted VMs. This API is not supported on the host. If invoked directly on a host, a NotSupported fault will be thrown.
Required Privileges
Cryptographer.RegisterHost
Since
vSphere API 6.5

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
keyId*CryptoKeyId

The key to be used for coredump encryption. If unset, uses existing host or cluster key or new key is generated from the default KMIP server.
*Need not be set

Return Value

Type Description
None

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



DisconnectHost_Task(disconnect)

Disconnects from a host and instructs the server to stop sending heartbeats.
Required Privileges
Host.Config.Connection

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.

Return Value

Type Description
ManagedObjectReference
to a Task
This method returns a Task object with which to monitor the operation.

Faults

Type Description
NotSupportedThrown if run directly on an ESX Server host.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None



EnableCrypto(enableCrypto)

Sets/changes the key to be used for coredump encryption and puts the host in safe state Note: PrepareCrypto must be called first
Required Privileges
Cryptographer.RegisterHost
Since
vSphere API 6.5

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
keyPlainCryptoKeyPlain

The key to be used for coredump encryption

Return Value

Type Description
None

Faults

Type Description
InvalidStateThrown if the host is in incapable state
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



EnterLockdownMode(enterLockdownMode)

Deprecated. As of vSphere API 6.0, use ChangeLockdownMode.

Modifies the permissions on the host, so that it will only be accessible through local console or an authorized centralized management application. Any user defined permissions found on the host are lost.

Access via a VI client connected to the host is blocked. Access though other services running on the host is also blocked.

If the operation is successful, adminDisabled will be set to true. This API is not supported on the host, If invoked directly on a host, a NotSupported fault will be thrown.
See AuthorizationManager

Required Privileges
Host.Config.Settings
Since
vSphere API 4.1

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.

Return Value

Type Description
None

Faults

Type Description
AdminDisabledThrown if the host's Administrator permission has been disabled.
See AuthorizationManager
DisableAdminNotSupportedThrown if invoked directly on the host or the host doesn't support this operation.
See AuthorizationManager
HostConfigFault
See AuthorizationManager
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



EnterMaintenanceMode_Task(enterMaintenanceMode)

Puts the host in maintenance mode. While this task is running and when the host is in maintenance mode, no virtual machines can be powered on and no provisioning operations can be performed on the host. Once the call completes, it is safe to turn off a host without disrupting any virtual machines.

The task completes once there are no powered-on virtual machines on the host and no provisioning operations in progress on the host. The operation does not directly initiate any operations to evacuate or power-down powered-on virtual machines. However, if the host is part of a cluster with VMware DRS enabled, DRS provides migration recommendations to evacuate the powered-on virtual machines. If DRS is in fully-automatic mode, these are automatically scheduled.

If the host is part of a cluster and the task is issued through VirtualCenter with evacuatePoweredOffVms set to true, the task will not succeed unless all the powered-off virtual machines are reregistered to other hosts. If VMware DRS is enabled, vCenter Server will automatically evacuate powered-off virtual machines. The task is cancellable.

Required Privileges
Host.Config.Maintenance

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
timeoutxsd:int

The task completes when the host successfully enters maintenance mode or the timeout expires, and in the latter case the task contains a Timeout fault. If the timeout is less than or equal to zero, there is no timeout. The timeout is specified in seconds.
evacuatePoweredOffVms*xsd:boolean

This is a parameter only supported by VirtualCenter. If set to true, for a DRS disabled cluster, the task will not succeed unless all powered-off virtual machines have been manually reregistered; for a DRS enabled cluster, VirtualCenter will automatically reregister powered-off virtual machines and a powered-off virtual machine may remain at the host only for two reasons: (a) no compatible host found for reregistration, (b) DRS is disabled for the virtual machine. If set to false, powered-off virtual machines do not need to be moved.

Since VI API 2.5
maintenanceSpec*HostMaintenanceSpec

Any additional actions to be taken by the host upon entering maintenance mode. If omitted, default actions will be taken as documented in the HostMaintenanceSpec.

Since vSphere API 5.5
*Need not be set

Return Value

Type Description
ManagedObjectReference
to a Task
This method returns a Task object with which to monitor the operation.

Faults

Type Description
InvalidStateThrown if the host is already in maintenance mode.
RequestCanceledThrown if the operation is canceled.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.
TimedoutThrown if the operation timed out.

Events

Type
None



ExitLockdownMode(exitLockdownMode)

Deprecated. As of vSphere API 6.0, use ChangeLockdownMode.

Restores Administrator permission for the local administrative account for the host that was removed by prior call to EnterLockdownMode. If the operation is successful, adminDisabled will be set to false. This API is not supported on the host. If invoked directly on a host, a NotSupported fault will be thrown.
See AuthorizationManager
Required Privileges
Host.Config.Settings
Since
vSphere API 4.1

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.

Return Value

Type Description
None

Faults

Type Description
AdminNotDisabledThrown if the host's Administrator permission is not disabled.
See AuthorizationManager
DisableAdminNotSupportedThrown if invoked directly on the host or the host doesn't support this operation.
See AuthorizationManager
HostConfigFault
See AuthorizationManager
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



ExitMaintenanceMode_Task(exitMaintenanceMode)

Takes the host out of maintenance mode. This blocks if any concurrent running maintenance-only host configurations operations are being performed. For example, if VMFS volumes are being upgraded.

The task is cancellable.

Required Privileges
Host.Config.Maintenance

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
timeoutxsd:int

Number of seconds to wait for the exit maintenance mode to succeed. If the timeout is less than or equal to zero, there is no timeout.

Return Value

Type Description
ManagedObjectReference
to a Task
This method returns a Task object with which to monitor the operation.

Faults

Type Description
InvalidStateThrown if the host is not in maintenance mode.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.
Timedout

Events

Type
None



PowerDownHostToStandBy_Task(enterStandbyMode)

Puts the host in standby mode, a mode in which the host is in a standby state from which it can be powered up remotely. While this task is running, no virtual machines can be powered on and no provisioning operations can be performed on the host.

The task completes only if there are no powered-on virtual machines on the host, no provisioning operations in progress on the host, and the host stopped responding. The operation does not directly initiate any operations to evacuate or power-down powered-on virtual machines. However, if a dynamic recommendation generation module is running, if possible, it will provide, and depending on the automation level, it will execute migrations of powered-on virtual machine. Furthermore, VMware power management module may evacute and put a host in standby mode to save power. If the host is part of a cluster and the task is issued through VirtualCenter with evacuatePoweredOffVms set to true, the task will not succeed unless all the powered-off virtual machines are reregistered to other hosts. If VMware DRS is enabled, vCenter Server will automatically evacuate powered-off virtual machines.

The task is cancellable.

This command is not supported on all hosts. Check the host capability standbySupported.

Required Privileges
Host.Config.Maintenance
Since
VI API 2.5

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
timeoutSecxsd:int

The task completes when the host successfully enters standby mode and stops sending heartbeat signals. If heartbeats are still coming after timeoutSecs seconds, the host is declared timedout, and the task is assumed failed.
evacuatePoweredOffVms*xsd:boolean

This is a parameter used only by VirtualCenter. If set to true, for a DRS disabled cluster, the task will not succeed unless all powered-off virtual machines have been manually reregistered; for a DRS enabled cluster, VirtualCenter will automatically reregister powered-off virtual machines and a powered-off virtual machine may remain at the host only for two reasons: (a) no compatible host found for reregistration, (b) DRS is disabled for the virtual machine.
*Need not be set

Return Value

Type Description
ManagedObjectReference
to a Task
This method returns a Task object with which to monitor the operation.

Faults

Type Description
HostPowerOpFailedThrown if the standby operation fails.
InvalidStateThrown if the host is already in standby mode, or disconnected.
NotSupportedThrown if the host does not support standby mode.
RequestCanceledThrown if the operation is canceled.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.
Timedout

Events

Type
None



PowerUpHostFromStandBy_Task(exitStandbyMode)

Takes the host out of standby mode. If the command is successful, the host wakes up and starts sending heartbeats. This method may be called automatically by a dynamic recommendation generation module to add capacity to a cluster, if the host is not in maintenance mode.

Note that, depending on the implementation of the wakeup method, the client may never receive an indicator of success in the returned task. In some cases, it is not even possible to ensure that the wakeup request has made it to the host.

The task is cancellable.

Required Privileges
Host.Config.Maintenance
Since
VI API 2.5

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
timeoutSecxsd:int

The task completes when the host successfully exits standby state and sends a heartbeat signal. If nothing is received from the host for timeoutSec seconds, the host is declared timedout, and the task is assumed failed.

Return Value

Type Description
ManagedObjectReference
to a Task
This method returns a Task object with which to monitor the operation.

Faults

Type Description
HostPowerOpFailedThrown if the standby operation fails.
InvalidStateThrown if the host is in a state from which it cannot be woken up (e.g., disconnected, poweredOff)
NotSupportedThrown if the host does not support standby mode.
RequestCanceledThrown if the operation is canceled.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.
Timedout

Events

Type
None



PrepareCrypto(prepareCrypto)

Prepare the host for receiving sensitive information and puts the host in prepared mode Note: Must be invoked before EnableCrypto
Required Privileges
Cryptographer.RegisterHost
Since
vSphere API 6.5

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.

Return Value

Type Description
None

Faults

Type Description
InvalidStateThrown if the host is not in incapable state
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



QueryHostConnectionInfo(queryConnectionInfo)

Connection-oriented information about a host.
Required Privileges
System.Read

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.

Return Value

Type Description
HostConnectInfo

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



QueryMemoryOverhead(queryOverhead)

Deprecated. As of VI API 2.5, use QueryMemoryOverheadEx.

Determines the amount of memory overhead necessary to power on a virtual machine with the specified characteristics.
Required Privileges
System.Read

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
memorySizexsd:long

The amount of virtual system RAM, in bytes. For an existing virtual machine, this value can be found (in megabytes) as the memoryMB property of the VirtualHardware.
videoRamSize*xsd:int

The amount of virtual video RAM, in bytes. For an existing virtual machine on a host that supports advertising this property, this value can be found (in kilobytes) as the videoRamSizeInKB property of the VirtualMachineVideoCard. If this parameter is left unset, the default video RAM size for virtual machines on this host is assumed.
numVcpusxsd:int

The number of virtual CPUs. For an existing virtual machine, this value can be found as the numCPU property of the VirtualHardware.
*Need not be set

Return Value

Type Description
xsd:longThe amount of overhead memory required to power on such a virtual machine, in bytes.

Faults

Type Description
NotSupportedThrown if the host does not have memory resource allocation features.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



QueryMemoryOverheadEx(queryOverheadEx)

Deprecated. As of VI API 6.0, use initialOverhead.

Determines the amount of memory overhead necessary to power on a virtual machine with the specified characteristics.
Required Privileges
System.Read
Since
VI API 2.5

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
vmConfigInfoVirtualMachineConfigInfo

The configuration of the virtual machine.

Return Value

Type Description
xsd:longThe amount of overhead memory required to power on such a virtual machine, in bytes.

Faults

Type Description
NotSupportedThrown if the host does not have memory resource allocation features.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



QueryTpmAttestationReport(queryTpmAttestationReport)

Basic information about TPM attestation state of the host.
Required Privileges
System.Read
Since
vSphere API 5.1

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.

Return Value

Type Description
HostTpmAttestationReport

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



RebootHost_Task(reboot)

Reboots a host. If the command is successful, then the host has been rebooted. If connected directly to the host, the client never receives an indicator of success in the returned task but simply loses connection to the host, upon success.

This command is not supported on all hosts. Check the host capability vim.host.Capability.rebootSupported.

Required Privileges
Host.Config.Maintenance

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
forcexsd:boolean

Flag to specify whether or not the host should be rebooted regardless of whether it is in maintenance mode. If true, the host is rebooted, even if there are virtual machines running or other operations in progress.

Return Value

Type Description
ManagedObjectReference
to a Task
This method returns a Task object with which to monitor the operation.

Faults

Type Description
InvalidStateThrown if "force" is false and the host is not in maintenance mode.
NotSupportedThrown if the host does not support the reboot operation.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None



ReconfigureHostForDAS_Task(reconfigureDAS)

Reconfigures the host for vSphere HA.

If the host is part of a HA cluster, this operation reconfigures the host for HA. For example, this operation may be used if a host is added to a HA enabled cluster and the automatic HA configuration system task fails. Automatic HA configuration may fail for a variety of reasons. For example, the host is configured incorrectly.

Required Privileges
Host.Config.Connection

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.

Return Value

Type Description
ManagedObjectReference
to a Task
This method returns a Task object with which to monitor the operation.

Faults

Type Description
DasConfigFaultThrown if there is a problem reconfiguring the host for HA.
NotSupportedThrown if run directly on an ESX Server host.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None



ReconnectHost_Task(reconnect)

Reconnects to a host. This process reinstalls agents and reconfigures the host, if it has gotten out of date with VirtualCenter. The reconnection process goes through many of the same steps as addHost: ensuring the correct set of licenses for the number of CPUs on the host, ensuring the correct set of agents is installed, and ensuring that networks and datastores are discovered and registered with VirtualCenter.

The client can change the IP address and port of the host when doing a reconnect operation. This can be useful if the client wants to preserve existing metadata, even though the host is changing its IP address. For example, clients could preserve existing statistics, alarms, and privileges.

This method can also be used to change the SSL thumbprint of a connected host without disconnecting it.

Any changes made to the resource hierarchy on the host when the host was disconnected are overriden by VirtualCenter settings on reconnect.

This method is only supported through VirtualCenter.

Required Privileges
Host.Config.Connection

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
cnxSpec*HostConnectSpec

Includes the parameters to use, including user name and password, when reconnecting to the host. If this parameter is not specified, the default connection parameters is used.
reconnectSpec*HostSystemReconnectSpec

Includes connection parameters specific to reconnect. This will mainly be used to indicate how to handle divergence between the host settings and vCenter Server settings when the host was disconnected.

Since vSphere API 5.0
*Need not be set

Return Value

Type Description
ManagedObjectReference
to a Task
This method returns a Task object with which to monitor the operation.

Faults

Type Description
AlreadyBeingManagedThrown if host is already being managed by another VirtualCenter server
GatewayConnectFaultThrown if the host is managed via host gateway and any error occured during the communication with the gateway
GatewayHostNotReachableThrown if the host is managed via host gateway and the gateway server cannot connect to the host
GatewayNotFoundThrown if the host is managed via host gateway and no available gateway server is found for the given parameters
GatewayNotReachableThrown if the host is managed via host gateway and vCenter Server cannot establish a network connection to the gateway server, or verify the gateway server's identity
GatewayOperationRefusedThrown if the gateway server cannot accept more host connections
GatewayToHostAuthFaultThrown if the host is managed via host gateway and the gateway server needs additional information to authenticate before the host
GatewayToHostTrustVerifyFaultThrown if the host is managed via host gateway and the gateway server cannot verify that the host is trusted
HostConnectFaultThrown if an error occurred when attempting to reconnect to a host. Typically, a more specific subclass, such as AlreadyBeingManaged, is thrown.
InvalidLoginThrown if the method fails to authenticate with the host.
InvalidNameThrown if the host name is invalid.
InvalidStateThrown if the host is not disconnected.
NoHostThrown if the method is unable to contact the server.
NotEnoughLicensesThrown if there are not enough licenses to add this host.
NotSupportedThrown if no host can be added to this group. This is the case if the ComputeResource is a standalone type.
NotSupportedHostThrown if the host is running a software version that is not supported.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.
SSLVerifyFaultThrown if the host certificate could not be authenticated.

Events

Type
None



RetrieveHardwareUptime(retrieveHardwareUptime)

Return the hardware uptime of the host in seconds. The harware uptime of a host is not affected by NTP and changes to its wall clock time and can be used by clients to provide a common time reference for all hosts.
Required Privileges
System.Read
Since
vSphere API 4.1

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.

Return Value

Type Description
xsd:long

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



ShutdownHost_Task(shutdown)

Shuts down a host. If the command is successful, then the host has been shut down. Thus, the client never receives an indicator of success in the returned task if connected directly to the host.

This command is not supported on all hosts. Check the host capability shutdownSupported.

Required Privileges
Host.Config.Maintenance

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
forcexsd:boolean

Flag to specify whether or not the host should be shut down regardless of whether it is in maintenance mode. If true, the host is shut down, even if there are virtual machines running or other operations in progress.

Return Value

Type Description
ManagedObjectReference
to a Task
This method returns a Task object with which to monitor the operation.

Faults

Type Description
InvalidStateThrown if "force" is false and the host is not in maintenance mode.
NotSupportedThrown if the host does not support shutdown.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None



UpdateFlags(updateFlags)

Update flags that are part of the HostFlagInfo object.
Required Privileges
Host.Config.Settings
Since
VI API 2.5

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
flagInfoHostFlagInfo



Return Value

Type Description
None

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



UpdateIpmi(updateIpmi)

Update fields that are part of the HostIpmiInfo object.
Required Privileges
Host.Config.Settings
Since
vSphere API 4.0

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
ipmiInfoHostIpmiInfo



Return Value

Type Description
None

Faults

Type Description
InvalidIpmiLoginInfoThrown if the supplied user ID and/or password is invalid.
InvalidIpmiMacAddressThrown if the supplied MAC address is invalid.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



UpdateSystemResources(updateSystemResources)

Deprecated. as of Vsphere API 6.0. Please, contact VMware Support to get instructions on how to configure system ESX resource pools.

Update the configuration of the system resource hierarchy.
Required Privileges
Host.Config.Resources

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
resourceInfoHostSystemResourceInfo



Return Value

Type Description
None

Faults

Type Description
InvalidArgumentThrown if the resource specification is invalid.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



UpdateSystemSwapConfiguration(updateSystemSwapConfiguration)

Update the System Swap Configuration.
See HostSystemSwapConfiguration
Required Privileges
Host.Config.Settings
Since
vSphere API 5.1

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostSystem used to make the method call.
sysSwapConfigHostSystemSwapConfiguration

Contains a list of system swap options that configure the system swap functionality.
See HostSystemSwapConfiguration


Return Value

Type Description
None

Faults

Type Description
InvalidArgumentThrown if the supplied sysSwapConfig is not correct.
See HostSystemSwapConfiguration
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition