Managed Object - VsanClusterHealthSystem(vim.cluster.VsanClusterHealthSystem)

See also: VsanClusterAdvCfgSyncResult, VsanClusterClomdLivenessResult, VsanClusterCreateVmHealthTestResult, VsanClusterHclInfo, VsanClusterHealthSystemObjectsRepairResult, VsanClusterHealthSystemVersionResult, VsanClusterHostVmknicMapping, VsanClusterLimitHealthResult, VsanClusterNetworkHealthResult, VsanClusterNetworkLoadTestResult, VsanPhysicalDiskHealthSummary, VsanVsanClusterPcapResult
Since: vSphere API 5.5

Managed Object Description

The vSAN Cluster Health System exposes the vSAN cluster health service API and serves as an aggregator to collect the result from each of hosts in the vSAN cluster.

Properties

Name	Type	Description
None

Methods

Methods defined in this Managed Object
VsanCheckClusterClomdLiveness, VsanClusterGetHclInfo, VsanQueryClusterAdvCfgSync, VsanQueryClusterCaptureVsanPcap, VsanQueryClusterCheckLimits, VsanQueryClusterCreateVmHealthTest, VsanQueryClusterHealthSystemVersions, VsanQueryClusterNetworkPerfTest, VsanQueryClusterPhysicalDiskHealthSummary, VsanQueryVerifyClusterNetworkSettings, VsanRepairClusterImmediateObjects

VsanCheckClusterClomdLiveness(checkClusterClomdLiveness)

Queries the CLOM daemon liveness on all of vSAN hosts

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The RootFolder entity in above table refers to the vCenter server itself in the vCenter UI
* The ClusterComputeResource entity in above table refers to the cluster which is being operated on

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster

Return Value

Type	Description
VsanClusterClomdLivenessResult	The vSAN cluster clomd health result

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanCheckClusterClomdLiveness" type="vsan:VsanCheckClusterClomdLivenessRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanCheckClusterClomdLivenessResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanClusterClomdLivenessResult"/>
               </sequence>
            </complexType>
         </element>

VsanClusterGetHclInfo(getClusterHclInfo)

Fetch HCL information about all devices in use by vSAN on all hosts.

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster

Return Value

Type	Description
VsanClusterHclInfo	The vSAN cluster HCL information

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanClusterGetHclInfo" type="vsan:VsanClusterGetHclInfoRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanClusterGetHclInfoResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanClusterHclInfo"/>
               </sequence>
            </complexType>
         </element>

VsanQueryClusterAdvCfgSync(queryAdvCfgSync)

Queries vSAN advanced configuration and checks if all of the hosts in a vSAN cluster have consistent advanced configuration options

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster
options*	xsd:string[]	list of vsi path for the configuration name *Since* vSAN API 6.6

*Need not be set

Return Value

Type	Description
VsanClusterAdvCfgSyncResult[]	The vSAN cluster advanced configuration consistent result. If empty, indicates all in sync.

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterAdvCfgSync" type="vsan:VsanQueryClusterAdvCfgSyncRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterAdvCfgSyncResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanClusterAdvCfgSyncResult" minOccurs="0" maxOccurs="unbounded"/>
               </sequence>
            </complexType>
         </element>

VsanQueryClusterCaptureVsanPcap(queryCaptureVsanPcap)

Captures the vSAN cluster multicast network trace to ensure that all of hosts in the cluster can receive multicast packets

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster
duration	xsd:int	Duration to watch for packets in second. 1 minute is recommended
vmknic*	VsanClusterHostVmknicMapping[]	The map for host and the vmknic using for vSAN *Since* vSphere API 5.5
includeRawPcap*	xsd:boolean	True to include the raw pcap data in the result. Default is False *Since* vSphere API 5.5
includeIgmp*	xsd:boolean	True to include the IGMP network test data. Default is True *Since* vSphere API 5.5
cmmdsMsgTypeFilter*	xsd:string[]	The filter for vSAN message type. The network message whose type is not in the filter list will be ignored. All of the supported message types include "MASTER_HEARTBEAT", "MASTER_UPDATE" and "AGENT_HEARTBEAT". *Since* vSphere API 5.5
cmmdsPorts*	xsd:int[]	The vSAN multicast ports. Unset will use the default vSAN multicast ports. *Since* vSphere API 5.5
clusterUuid*	xsd:string	The vSAN cluster UUID. *Since* vSphere API 5.5

*Need not be set

Return Value

Type	Description
VsanVsanClusterPcapResult	The vSAN cluster multicast trace result

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterCaptureVsanPcap" type="vsan:VsanQueryClusterCaptureVsanPcapRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterCaptureVsanPcapResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanVsanClusterPcapResult"/>
               </sequence>
            </complexType>
         </element>

VsanQueryClusterCheckLimits(queryCheckLimits)

Queries the vSAN cluster component limits, disk space and read cache reservation assuming one host failure

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster

Return Value

Type	Description
VsanClusterLimitHealthResult	The vSAN cluster limit health result

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterCheckLimits" type="vsan:VsanQueryClusterCheckLimitsRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterCheckLimitsResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanClusterLimitHealthResult"/>
               </sequence>
            </complexType>
         </element>

VsanQueryClusterCreateVmHealthTest(queryClusterCreateVmHealthTest)

Executes VM creation test and checks if a tiny VM can be created on each of host of the vSAN cluster

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster
timeout	xsd:int	The timeout time for the VM creation test

Return Value

Type	Description
VsanClusterCreateVmHealthTestResult	The vSAN cluster VM creation test result

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterCreateVmHealthTest" type="vsan:VsanQueryClusterCreateVmHealthTestRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterCreateVmHealthTestResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanClusterCreateVmHealthTestResult"/>
               </sequence>
            </complexType>
         </element>

VsanQueryClusterHealthSystemVersions(queryClusterHealthSystemVersions)

Queries vSAN health service version number string for each host and check if all of them are consistent. Mark issueFound flag as True if they are not consistent.

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster

Return Value

Type	Description
VsanClusterHealthSystemVersionResult	The vSAN cluster health service version result

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterHealthSystemVersions" type="vsan:VsanQueryClusterHealthSystemVersionsRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterHealthSystemVersionsResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanClusterHealthSystemVersionResult"/>
               </sequence>
            </complexType>
         </element>

VsanQueryClusterNetworkPerfTest(queryClusterNetworkPerfTest)

Queries the vSAN network performance and checks if it meets the bandwidth requirements.

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster
multicast	xsd:boolean	True to test vSAN multicast network performance. False to test vSAN unicast network performance.
durationSec*	xsd:int	The duration time for the Network Performance test. Default is 15 seconds if not set. *Since* vSAN API vSAN 6.7U1

*Need not be set

Return Value

Type	Description
VsanClusterNetworkLoadTestResult	The vSAN cluster network performance test result

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterNetworkPerfTest" type="vsan:VsanQueryClusterNetworkPerfTestRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterNetworkPerfTestResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanClusterNetworkLoadTestResult"/>
               </sequence>
            </complexType>
         </element>

VsanQueryClusterPhysicalDiskHealthSummary(queryPhysicalDiskHealthSummary)

Queries the vSAN physical disks health on all of vSAN hosts

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster

Return Value

Type	Description
VsanPhysicalDiskHealthSummary[]	The vSAN physical disks health result

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterPhysicalDiskHealthSummary" type="vsan:VsanQueryClusterPhysicalDiskHealthSummaryRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryClusterPhysicalDiskHealthSummaryResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanPhysicalDiskHealthSummary" maxOccurs="unbounded"/>
               </sequence>
            </complexType>
         </element>

VsanQueryVerifyClusterNetworkSettings(queryVerifyClusterNetworkSettings)

Queries the vSAN cluster network setting and connectivity health status

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster

Return Value

Type	Description
VsanClusterNetworkHealthResult	The vSAN cluster network health result

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryVerifyClusterNetworkSettings" type="vsan:VsanQueryVerifyClusterNetworkSettingsRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanQueryVerifyClusterNetworkSettingsResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanClusterNetworkHealthResult"/>
               </sequence>
            </complexType>
         </element>

VsanRepairClusterImmediateObjects(repairClusterImmediateObjects)

Fix absent and degraded components in object immediately. The result will contain which object have been in queue for repair or failed to be repaired

Combined Privileges Required (on vSphere ManagedEntity):

Privileges	Required on
System.Read	RootFolder

* The Required Privileges section below is not used, please ignore.

Required Privileges: System.Read

Parameters

Name	Type	Description
_this	ManagedObjectReference	A reference to the VsanClusterHealthSystem used to make the method call.
hosts	xsd:string[]	The vSAN hosts
esxRootPassword	xsd:string	The root password for the host. The password should be the same for all of hosts in the vSAN cluster
uuids*	xsd:string[]	The vSAN objects UUID to be repaired. Unset to repair all of reduced objects in the vSAN cluster *Since* vSphere API 5.5

*Need not be set

Return Value

Type	Description
VsanClusterHealthSystemObjectsRepairResult	The vSAN cluster object repair result

Faults

Type	Description
NotFound
RuntimeFault	Thrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition

         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanRepairClusterImmediateObjects" type="vsan:VsanRepairClusterImmediateObjectsRequestType"/>
         <element xmlns="http://www.w3.org/2001/XMLSchema" xmlns:vsan="urn:vsan" name="VsanRepairClusterImmediateObjectsResponse">
            <complexType>
               <sequence>
                  <element name="returnval" type="vsan:VsanClusterHealthSystemObjectsRepairResult"/>
               </sequence>
            </complexType>
         </element>