Data Object Description

VirtualMachineBootOptions

You can use the delay options to specify a time interval during which you can enter the virtual machine BIOS setup. These options provide a solution for the situation that occurs when the console attaches to the virtual machine after the boot sequence has passed the BIOS setup entry point.

Properties

Name	Type	Description
bootDelay*	xsd:long	Delay in milliseconds before starting the boot sequence. The boot delay specifies a time interval between virtual machine power on or restart and the beginning of the boot sequence.
bootOrder*	VirtualMachineBootOptionsBootableDevice[]	Boot order. Listed devices are used for booting. After list is exhausted, default BIOS boot device algorithm is used for booting. Note that order of the entries in the list is important: device listed first is used for boot first, if that one fails second entry is used, and so on. Platform may have some internal limit on the number of devices it supports. If bootable device is not reached before platform's limit is hit, boot will fail. At least single entry is supported by all products supporting boot order settings. *Since* vSphere API 5.0
bootRetryDelay*	xsd:long	Delay in milliseconds before a boot retry. The boot retry delay specifies a time interval between virtual machine boot failure and the subsequent attempt to boot again. The virtual machine uses this value only if bootRetryEnabled is true. *Since* vSphere API 4.1
bootRetryEnabled*	xsd:boolean	If set to `true`, a virtual machine that fails to boot will try again after the bootRetryDelay time period has expired. When `false`, the virtual machine waits indefinitely for you to initiate boot retry. *Since* vSphere API 4.1
efiSecureBootEnabled*	xsd:boolean	If set to `true`, the virtual machine's firmware will perform signature checks of any EFI images loaded during startup, and will refuse to start any images which do not pass those signature checks. When creating a new VM: - If vim.vm.FlagInfo.vbsEnabled is set to `true`, and this flag is set to `false` error is returned. - If this flag is unset and vim.vm.FlagInfo.vbsEnabled is set to `true`, the value of this flag is set to `true`. *Since* vSphere API 6.5
enterBIOSSetup*	xsd:boolean	If set to `true`, the virtual machine automatically enters BIOS setup the next time it boots. The virtual machine resets this flag to `false` so that subsequent boots proceed normally.
networkBootProtocol*	xsd:string	Protocol to attempt during PXE network boot or NetBoot. See VirtualMachineBootOptionsNetworkBootProtocolType *Since* vSphere API 6.0
Properties inherited from DynamicData
None

Name

Type

Description

bootDelay*

xsd:long

Delay in milliseconds before starting the boot sequence. The boot delay specifies a time interval between virtual machine power on or restart and the beginning of the boot sequence.

bootOrder*

VirtualMachineBootOptionsBootableDevice[]

Boot order. Listed devices are used for booting. After list is exhausted, default BIOS boot device algorithm is used for booting. Note that order of the entries in the list is important: device listed first is used for boot first, if that one fails second entry is used, and so on. Platform may have some internal limit on the number of devices it supports. If bootable device is not reached before platform's limit is hit, boot will fail. At least single entry is supported by all products supporting boot order settings.

Since vSphere API 5.0

bootRetryDelay*

xsd:long

Delay in milliseconds before a boot retry. The boot retry delay specifies a time interval between virtual machine boot failure and the subsequent attempt to boot again. The virtual machine uses this value only if bootRetryEnabled is true.

Since vSphere API 4.1

bootRetryEnabled*

xsd:boolean

If set to true, a virtual machine that fails to boot will try again after the bootRetryDelay time period has expired. When false, the virtual machine waits indefinitely for you to initiate boot retry.

Since vSphere API 4.1

efiSecureBootEnabled*

xsd:boolean

If set to true, the virtual machine's firmware will perform signature checks of any EFI images loaded during startup, and will refuse to start any images which do not pass those signature checks. When creating a new VM: - If vim.vm.FlagInfo.vbsEnabled is set to true, and this flag is set to false error is returned. - If this flag is unset and vim.vm.FlagInfo.vbsEnabled is set to true, the value of this flag is set to true.

Since vSphere API 6.5

enterBIOSSetup*

xsd:boolean

If set to true, the virtual machine automatically enters BIOS setup the next time it boots. The virtual machine resets this flag to false so that subsequent boots proceed normally.

networkBootProtocol*

xsd:string

Protocol to attempt during PXE network boot or NetBoot.
See VirtualMachineBootOptionsNetworkBootProtocolType

Since vSphere API 6.0

Properties inherited from DynamicData

None

Need not be set

Show WSDL type definition

         <complexType xmlns="http://www.w3.org/2001/XMLSchema" xmlns:pbm="urn:pbm" name="VirtualMachineBootOptions">
            <complexContent>
               <extension base="pbm:DynamicData">
                  <sequence>
                     <element name="bootDelay" type="xsd:long" minOccurs="0"/>
                     <element name="enterBIOSSetup" type="xsd:boolean" minOccurs="0"/>
                     <element name="efiSecureBootEnabled" type="xsd:boolean" minOccurs="0"/>
                     <element name="bootRetryEnabled" type="xsd:boolean" minOccurs="0"/>
                     <element name="bootRetryDelay" type="xsd:long" minOccurs="0"/>
                     <element name="bootOrder" type="pbm:VirtualMachineBootOptionsBootableDevice" minOccurs="0" maxOccurs="unbounded"/>
                     <element name="networkBootProtocol" type="xsd:string" minOccurs="0"/>
                  </sequence>
               </extension>
            </complexContent>
         </complexType>

Data Object - VirtualMachineBootOptions(vim.vm.BootOptions)

Data Object Description