| Local Properties | ||
Managed Object Types | Data Object Types | All Properties | All Methods |
Properties
Name | Type | Description |
---|---|---|
alternateGuestName* | xsd:string |
Full name for guest, if guestId is specified as other
or other-64.
Reconfigure privilege: VirtualMachine.Config.Settings Since VI API 2.5 |
annotation* | xsd:string |
User-provided description of the virtual machine. Because this property
is optional in the virtual machine configuration, it is necessary
to pass an explicit empty string in a ConfigSpec object to remove an annotation
that is already present in the VirtualMachineConfigInfo
for a virtual machine.
Reconfigure privilege: VirtualMachine.Config.Rename
|
bootOptions* | VirtualMachineBootOptions |
Settings that control the boot behavior of the virtual
machine. These settings take effect during the next power-on
of the virtual machine.
Reconfigure privilege: VirtualMachine.Config.Settings Since VI API 2.5 |
changeTrackingEnabled* | xsd:boolean |
Setting to control enabling/disabling changed block tracking for
the virtual disks of this VM. This may only be set if the
changeTrackingSupported
capability is true for this virtual machine. Any change to this property
will take effect the next time the virtual machine powers on, resumes
from a suspended state, performs a snapshot create/delete/revert operation
or migrates while powered on.
Reconfigure privilege: VirtualMachine.Config.ChangeTracking (also required when setting this property while creating a virtual machine) Since vSphere API 4.0 |
changeVersion* | xsd:string |
If specified, the changes are only applied if the current changeVersion matches
the specified changeVersion. This field can be used to guard against updates that
have happened between when configInfo is read and when it is applied.
For more information about how configurations are uniquely identified, see
changeVersion.
|
consolePreferences* | VirtualMachineConsolePreferences |
Legacy console viewer preferences that are used with power operations. For
example, power on.
Reconfigure privilege: VirtualMachine.Config.Settings
|
cpuAffinity* | VirtualMachineAffinityInfo |
Affinity settings for CPU.
Reconfigure privilege: VirtualMachine.Config.Resource
|
cpuAllocation* | ResourceAllocationInfo |
Resource limits for CPU.
Reconfigure privilege: VirtualMachine.Config.Resource
|
cpuFeatureMask* | VirtualMachineCpuIdInfoSpec[] |
Specifies the CPU feature compatibility masks.
Reconfigure privilege: VirtualMachine.Config.Settings
As of vSphere API 6.5 FeatureMask
is the recommended method for masking virtual machines with
hardware version 9 and above (newer).
|
cpuHotAddEnabled* | xsd:boolean |
Indicates whether or not virtual processors can be added to
the virtual machine while it is running.
This attribute can only be set when the virtual machine is
powered-off.
Reconfigure privilege: VirtualMachine.Config.CpuCount Since vSphere API 4.0 |
cpuHotRemoveEnabled* | xsd:boolean |
Indicates whether or not virtual processors can be removed
from the virtual machine while it is running.
This attribute can only be set when the virtual machine is
powered-off.
Reconfigure privilege: VirtualMachine.Config.CpuCount Since vSphere API 4.0 |
createDate* | xsd:dateTime |
Creation date of a virtual machine represented in DateTime format.
This property is populated by the vCenter Server with the date and time of creation of the virtual machine. Values provided by the client will be ignored. Reconfigure privilege: VirtualMachine.Config.Settings Since vSphere API 6.7 |
crypto* | CryptoSpec |
Virtual Machine cryptographic options.
The cryptographic options are inherited to all disks of the VM.
The cryptographic options for a disk can be different by setting
its CryptoSpec.
Since vSphere API 6.5 |
deviceChange* | VirtualDeviceConfigSpec[] |
Set of virtual devices being modified by the configuration operation.
Reconfigure privileges:
|
extraConfig* | OptionValue[] |
Additional configuration information for the virtual machine.
This describes a set of modifications to the additional options. If the key is
already present, it will be reset with the new value provided. Otherwise, a new
option is added. Keys with empty values will be removed.
Configuration keys that would conflict with parameters that are explicitly configurable through other fields in the ConfigSpec object are silently ignored.
Reconfigure privilege: VirtualMachine.Config.AdvancedConfig
(also required when setting this property while creating a virtual machine)
|
files* | VirtualMachineFileInfo |
Information about virtual machine files.
Reconfigure privilege: VirtualMachine.Config.Settings
|
firmware* | xsd:string |
Set the desired firmware type for this Virtual Machine.
Possible values are described in
GuestOsDescriptorFirmwareType
Since vSphere API 5.0 |
flags* | VirtualMachineFlagInfo |
Additional flags for a virtual machine.
Reconfigure privilege: VirtualMachine.Config.Settings
|
ftInfo* | FaultToleranceConfigInfo |
Fault Tolerance settings for this virtual machine.
Since vSphere API 4.0 |
guestAutoLockEnabled* | xsd:boolean |
If set to True, this causes the guest operating system to automatically
logout any active sessions whenever there are no remote display
connections open to the virtual machine.
Reconfigure privilege: VirtualMachine.Config.MksControl Since vSphere API 5.0 |
guestId* | xsd:string |
Short guest operating system identifier.
Reconfigure privilege: VirtualMachine.Config.Settings
|
instanceUuid* | xsd:string |
VirtualCenter-specific 128-bit UUID of a virtual machine, represented
as a hexadecimal string. This identifier is used by VirtalCenter
to uniquely identify all virtual machine instances in the Virtual
Infrastructure environment, including those that may share the same
SMBIOS UUID.
Normally, this property is not set by a client, allowing the Virtual Infrastructure environment to assign or change it when VirtualCenter detects an identifier conflict between virtual machines. This identifier can be modified even when a virtual machine is powered on. Clients can specify that vCenter Server reassign a new identifier by a providing an empty string. Reassigning the identifer is not allowed for Fault Tolerance virtual machines. Reconfigure privilege: VirtualMachine.Config.Settings Since vSphere API 4.0 |
latencySensitivity* | LatencySensitivity |
The latency-sensitivity setting of the virtual machine.
Reconfigure privilege: VirtualMachine.Config.Resource Since vSphere API 5.1 |
locationId* | xsd:string |
128-bit hash based on the virtual machine's configuration file location
and the UUID of the host assigned to run the virtual machine.
Normally, this property is not set by a client, allowing the Virtual Infrastructure environment to assign a location ID when the virtual machine is created. However, if the virtual machine's configuration file has been manually moved, it may be desirable to clear this property, setting it to an empty string, so the property is regenerated.
Reconfigure privilege: VirtualMachine.Config.Settings
|
managedBy* | ManagedByInfo |
Specifies that this VM is managed by a VC Extension.
This information is primarily used in the Client to show a custom icon for managed virtual machines, and a description of the function of the virtual machine. If no extension can be found with the extension key in the managedBy object, or the type is not found in the managedEntityInfo list of the extension, the default virtual machine icon is used, and no description is shown. To unset this field pass a ManagedByInfo object with an empty extensionKey. Reconfigure privilege: VirtualMachine.Config.ManagedBy Since vSphere API 5.0 |
maxMksConnections* | xsd:int |
If set, this setting limits the maximum number of active remote
display connections that the virtual machine will support to
the specified value.
Reconfigure privilege: VirtualMachine.Config.MksControl Since vSphere API 5.0 |
memoryAffinity* | VirtualMachineAffinityInfo | Deprecated.
since vSphere 6.0.
Affinity settings for memory.
Reconfigure privilege: VirtualMachine.Config.Resource
|
memoryAllocation* | ResourceAllocationInfo |
Resource limits for memory.
Reconfigure privilege: VirtualMachine.Config.Resource
|
memoryHotAddEnabled* | xsd:boolean |
Indicates whether or not memory can be added to the virtual
machine while it is running.
This attribute can only be set when the virtual machine is
powered-off.
Reconfigure privilege: VirtualMachine.Config.Memory Since vSphere API 4.0 |
memoryMB* | xsd:long |
Size of a virtual machine's memory, in MB.
Reconfigure privilege: VirtualMachine.Config.Memory
|
memoryReservationLockedToMax* | xsd:boolean |
If set true, memory resource reservation for this virtual machine will always be
equal to the virtual machine's memory size; increases in memory size will be
rejected when a corresponding reservation increase is not possible. This feature
may only be enabled if it is currently possible to reserve all of the virtual machine's memory.
Reconfigure privilege: VirtualMachine.Config.Resource Since vSphere API 5.0 |
messageBusTunnelEnabled* | xsd:boolean |
Whether to allow tunneling of clients from the guest VM into the
common message bus on the host network.
Since vSphere API 6.0 |
migrateEncryption* | xsd:string |
An enum describing whether encrypted vMotion is required for this VM.
Supported values are listed in EncryptedVMotionModes.
This defaults to opportunistic for a regular VM, and will be set to
required for an encrypted VM.
Since vSphere API 6.5 |
name* | xsd:string |
Display name of the virtual machine.
Any % (percent) character used in this name parameter must be escaped, unless it is used to start an escape sequence. Clients may also escape any other characters in this name parameter. Snapshots of virtual machines that have spaces in their names and are associated with ESX 2.x servers are not supported. Therefore, if you want the option to take snapshots of this virtual machine and you are associating it with an ESX 2.x server, do not use spaces in the name.
Reconfigure privilege: VirtualMachine.Config.Rename
|
nestedHVEnabled* | xsd:boolean |
Specifies that this VM will use nested hardware-assisted virtualization.
When creating a new VM:
- If vim.vm.FlagInfo.vbsEnabled is set to true ,
and this flag is set to false error is returned.
- If this flag is unset and vim.vm.FlagInfo.vbsEnabled is set to
true , the value of this flag is set to true .
Reconfigure privilege: VirtualMachine.Config.Settings Since vSphere API 5.1 |
networkShaper* | VirtualMachineNetworkShaperInfo | Deprecated.
from vSphere 5.5, shaping policy on VM is not supported.
Resource limits for network.
Reconfigure privilege: VirtualMachine.Config.Resource
|
npivDesiredNodeWwns* | xsd:short |
The NPIV node WWNs to be extended from the original list of WWN nummbers. This
property should be set to desired number which is an aggregate of existing
plus new numbers. Desired Node WWNs should always be greater than the existing
number of node WWNs
Since vSphere API 4.0 |
npivDesiredPortWwns* | xsd:short |
The NPIV port WWNs to be extended from the original list of WWN nummbers. This
property should be set to desired number which is an aggregate of existing
plus new numbers. Desired Node WWNs should always be greater than the existing
number of port WWNs
Since vSphere API 4.0 |
npivNodeWorldWideName* | xsd:long[] |
The NPIV node WWN to be assigned to a virtual machine. This property should only
be used or set when the value of npivWorldWideNameOp property is "set".
Otherwise, an InvalidVmConfig fault will be thrown. If the
specified node WWN is currently being used by another virtual machine, a
VmWwnConflict fault will be thrown.
For detail description on WWN, see npivNodeWorldWideName. Reconfigure privilege: VirtualMachine.Config.Settings. Since VI API 2.5 |
npivOnNonRdmDisks* | xsd:boolean |
This property is used to check whether the NPIV can be enabled on the Virtual
machine with non-rdm disks in the configuration, so this is potentially not
enabling npiv on vmfs disks. Also this property is used to check whether RDM
is required to generate WWNs for a virtual machine.
Since vSphere API 4.0 |
npivPortWorldWideName* | xsd:long[] |
The NPIV port WWN to be assigned to a virtual machine. This property should only
be used or set when the value of npivWorldWideNameOp property is "set".
Otherwise, an InvalidVmConfig fault will be thrown. If the
specified port WWN is currently being used by another virtual machine, a
VmWwnConflict fault will be thrown.
For detail description on WWN, see npivPortWorldWideName. Reconfigure privilege: VirtualMachine.Config.Settings. Since VI API 2.5 |
npivTemporaryDisabled* | xsd:boolean |
This property is used to enable or disable the NPIV capability on a desired
virtual machine on a temporary basis. When this property is set NPIV Vport
will not be instantiated by the VMX process of the Virtual Machine. When this
property is set port WWNs and node WWNs in the VM configuration are preserved.
Reconfigure privilege: VirtualMachine.Config.Settings. Since vSphere API 4.0 |
npivWorldWideNameOp* | xsd:string |
The flag to indicate what type of NPIV WWN operation is going to be performed
on the virtual machine. If unset, it indicates no change to existing NPIV WWN
assignment (or not assigned) in the virtual machine.
Reconfigure privilege: VirtualMachine.Config.Settings. |
npivWorldWideNameType* | xsd:string |
This property is used internally in the communication between the
VirtualCenter server and ESX Server to indicate the source for
npivNodeWorldWideName and
npivPortWorldWideName when npivWorldWideNameOp is "set".
This property should only be set by the VirtualCenter server.
If this property is set in a call to a VirtualCenter server, an InvalidVmConfig fault will always be thrown. In a call to an ESX Server host, an InvalidVmConfig fault will be thrown if the value of npivWorldWideNameOp is not set to "set". Reconfigure privilege: VirtualMachine.Config.Settings. Since VI API 2.5 |
numCoresPerSocket* | xsd:int |
Number of cores among which to distribute
CPUs in this virtual machine.
Since vSphere API 5.0 |
numCPUs* | xsd:int |
Number of virtual processors in a virtual machine.
Reconfigure privilege: VirtualMachine.Config.CpuCount
|
powerOpInfo* | VirtualMachineDefaultPowerOpInfo |
Configuration for default power operations.
Reconfigure privilege: VirtualMachine.Config.Settings
|
repConfig* | ReplicationConfigSpec |
vSphere Replication settings.
Note this may become deprecated in the future releases. We
discourage any unnecessary dependency on this field.
Since vSphere API 6.0 |
scheduledHardwareUpgradeInfo* | ScheduledHardwareUpgradeInfo |
Configuration of scheduled hardware upgrades.
Reconfigure privilege: VirtualMachine.Config.UpgradeVirtualHardware |
swapPlacement* | xsd:string |
Virtual machine swapfile placement policy. This may only be set if the
swapPlacementSupported
capability is true for this virtual machine. Any change to this policy
will take effect the next time the virtual machine powers on, resumes
from a suspended state, or migrates while powered on.
Reconfigure privilege: VirtualMachine.Config.SwapPlacement (also required when setting this property while creating a virtual machine)
|
tools* | ToolsConfigInfo |
Configuration of VMware Tools running in the guest operating system.
Reconfigure privilege: VirtualMachine.Config.Settings
|
uuid* | xsd:string |
128-bit SMBIOS UUID of a virtual machine represented as a hexadecimal string
in "12345678-abcd-1234-cdef-123456789abc" format.
Normally, this property is not set by a client, allowing the Virtual Infrastructure environment to assign a UUID when the virtual machine is created. However, in some rare cases, such as a manual copy of a virtual machine, it may be necessary to set this property.
Reconfigure privilege: VirtualMachine.Config.Settings
|
vAppConfig* | VmConfigSpec |
Configuration of vApp meta-data for a virtual machine
Since vSphere API 4.0 |
vAppConfigRemoved* | xsd:boolean |
Set to true, if the vApp configuration should be removed
Reconfigure privilege: VApp.ApplicationConfig Since vSphere API 4.0 |
vAssertsEnabled* | xsd:boolean |
Indicates whether user-configured virtual asserts will be
triggered during virtual machine replay. This setting takes
effect during the next replay of the virtual machine.
Enabling this functionality can potentially cause some performance overhead during virtual machine execution. Since vSphere API 4.0 |
version* | xsd:string |
The version string for this virtual machine. This is used only while
creating a new virtual machine, and can be updated by invoking
UpgradeVM_Task for this virtual
machine.
|
virtualICH7MPresent* | xsd:boolean |
Does this virtual machine have Virtual Intel I/O Controller Hub 7
Since vSphere API 5.0 |
virtualSMCPresent* | xsd:boolean |
Does this virtual machine have System Management Controller
Since vSphere API 5.0 |
vmProfile* | VirtualMachineProfileSpec[] |
Virtual Machine Profile requirement.
Profiles are solution specific.
Profile Based Storage Management is a vSphere server extension.
API users who want to provision VMs using Storage Profiles, need to
interact with it.
This is an optional parameter and if user doesn't specify profile,
the default behavior will apply.
Since vSphere API 5.5 |
vPMCEnabled* | xsd:boolean |
Specifies that this VM will have virtual CPU performance counters
enabled.
Reconfigure privilege: VirtualMachine.Config.Settings Since vSphere API 5.1 |
Properties inherited from DynamicData | ||
None |
Top of page | Local Properties | ||
Managed Object Types | Data Object Types | All Properties | All Methods |